When the Head to Tail relationship was H < T, then
only the tail to end of buffer was sent.
The fix is: In the txdma completion to do a second
the DMA operation using nbuffer if the nlength is
non zero.
stm32f7:serial UART5 use actual size
UART5 was using the CONFIG_UART5_TXBUFSIZE
not the UART5_TXBUFSIZE_ADJUSTED.
Since the buffer size was adjusted up, this
has no dcache implications.
If the UART5_TXBUFSIZE_ADJUSTED is larger
then CONFIG_UART5_TXBUFSIZE it will present
a larger usable buffer to the system's
serial driver.
## Summary of Changes
Add a host timer that generates periodic signals and sends SIGALRM to
the process that runs the NuttX simulation. This logic is integrated as
part of the existing NuttX oneshot timer. The host timer installs an
irq handler which is expected to run every CONFIG_USEC_PER_TICK .
Signed-off-by: Sebastian Ene <nuttx@fitbit.com>
This implements the missing callback hooks nrf52_spi0/1/2/3register
that are usually used with mmcsd for card detection.
This also stubs out the missing spi trigger function which is not
used on this platform.
The card detect was tested with the nRF52-feather board and a
modified KeyBoard FeatherWing.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
1. There is difference about symbol replace on nuttx-names.in
between MacOS & Linux
2. For MacOS, if open '-fvisibility=hidden' and adjust nuttx-names.in,
it will meet symbol link-back-to-nuttx error.
3. Make the MacOS replace behaviour, same with Linux
Note:
MacOS should install objcopy with command:
$ brew install binutils
$ export PATH=$PATH:/usr/local/opt/binutils/bin
already check in to cibuild.sh
Change-Id: If78b784cc0ecb98cdbf7091de38acef00a8a02f3
Signed-off-by: ligd <liguiding1@xiaomi.com>
and remove the special handling in the stack dump
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia1ef9a427bd4c7f6cee9838d0445f29cfaca3998
The current EasyDMA implementation will fail if a transfer of over
255 bytes is requested with no warning.
Also we do not set the RX and TX transfer lengths to 0 if the
buffer is NULL which can cause data to be written to the old
address as well as cause unexpected transaction lenghts.
Example:
transfer 1:
rx_len = 10
rx_buff != NULL
tx_len = 10
tx_buff != NULL
transfer 2:
rx_len = 2
rx_buff != NULL
tx_buff == NULL
Total transaction length for the second would be 10 because it
would still be using the old rx length of 10 and would
corrupt data in the old rx buffer.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
EXTRAFLAGS is already applied to *FLAGS in board's Make.defs (and
it applies to whole build, not just arch-code). EXTRAFLAGS is passed
around each make call to the complete build.
KDEFINE is already added to EXTRAFLAGS in main Makefile so no need
to add it again in arch-level Makefile
