When the Head to Tail relationship was H < T, then
only the tail to end of buffer was sent.
The fix is: In the txdma completion to do a second
the DMA operation using nbuffer if the nlength is
non zero.
stm32f7:serial UART5 use actual size
UART5 was using the CONFIG_UART5_TXBUFSIZE
not the UART5_TXBUFSIZE_ADJUSTED.
Since the buffer size was adjusted up, this
has no dcache implications.
If the UART5_TXBUFSIZE_ADJUSTED is larger
then CONFIG_UART5_TXBUFSIZE it will present
a larger usable buffer to the system's
serial driver.
This implements the missing callback hooks nrf52_spi0/1/2/3register
that are usually used with mmcsd for card detection.
This also stubs out the missing spi trigger function which is not
used on this platform.
The card detect was tested with the nRF52-feather board and a
modified KeyBoard FeatherWing.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
and remove the special handling in the stack dump
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia1ef9a427bd4c7f6cee9838d0445f29cfaca3998
The current EasyDMA implementation will fail if a transfer of over
255 bytes is requested with no warning.
Also we do not set the RX and TX transfer lengths to 0 if the
buffer is NULL which can cause data to be written to the old
address as well as cause unexpected transaction lenghts.
Example:
transfer 1:
rx_len = 10
rx_buff != NULL
tx_len = 10
tx_buff != NULL
transfer 2:
rx_len = 2
rx_buff != NULL
tx_buff == NULL
Total transaction length for the second would be 10 because it
would still be using the old rx length of 10 and would
corrupt data in the old rx buffer.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
EXTRAFLAGS is already applied to *FLAGS in board's Make.defs (and
it applies to whole build, not just arch-code). EXTRAFLAGS is passed
around each make call to the complete build.
KDEFINE is already added to EXTRAFLAGS in main Makefile so no need
to add it again in arch-level Makefile
1.Reduce the default size of task_group_s(~512B each task)
2.Scale better between simple and complex application
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia872137504fddcf64d89c48d6f0593d76d582710
This commit exends systimer options for nRF52 arch. It is possible
to use ARM SysTick either for tickless or non-tickless mode. Also,
it is possible to use the RTC peripheral for tickless mode. This
also re-enables support for WFI/WFE sleep if RTC is used, since
this counter continues to run in this mode (in contrast to SysTick).
Summary:
- I noticed that ldrex/strex on cxd56xx have an issue
- The issue is still under investigation
- This commit introduces a custom testset to avoid the issue
Impact:
- Affects cxd56xx in SMP mode if it is enabled
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that ostest sometimes stops with DEBUGASSERT
- Finally I found a bug that cpu1 can not disable interrupt
- This commit initializes nvic to fix this bug
Impact:
- Only affects cxd56 in SMP mode
Testing:
- spresense:smp and spresense:wifi_smp with DEBUG_ASSERTIONS=y
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
