Gregory Nutt
|
f18541fe41
|
SAM4E: Clarify LCD data width
|
2014-03-28 08:29:04 -06:00 |
|
Gregory Nutt
|
f009601bf7
|
SAM4E-EK: Remove bogus LCD driver; replace with information that might be useful to someone who wants to develop an LCD driver for the SAM4E-EK
|
2014-03-27 10:38:21 -06:00 |
|
Gregory Nutt
|
90b0d6d13f
|
SAM4E-EK: CMCC is enabled in all configurations and delay loop has been calibrated
|
2014-03-26 17:07:08 -06:00 |
|
Gregory Nutt
|
13af80568b
|
SAM4E-EK: All configurations converted to run with 120MHz CPU clock
|
2014-03-26 14:03:33 -06:00 |
|
Gregory Nutt
|
698a4c2cd2
|
SAM4E USP: Re-vamp read request queue handling. Add logic to handle RX overrun errors
|
2014-03-26 11:38:47 -06:00 |
|
Gregory Nutt
|
9350b9d4d0
|
SAMA5D3: Fix some typos in last blind changes backported from the SAM4e. And verified
|
2014-03-25 16:11:33 -06:00 |
|
Gregory Nutt
|
f99990579d
|
backport a serial console fix from the sam4e to the sama5d3
|
2014-03-25 14:34:07 -06:00 |
|
Gregory Nutt
|
7b1e036057
|
Cosmetic updates to comments and README files
|
2014-03-24 10:23:56 -06:00 |
|
Gregory Nutt
|
2ba8224cdc
|
SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ in all board-related files
|
2014-03-23 15:48:10 -06:00 |
|
Gregory Nutt
|
0153c903e0
|
Cosmet update to debug messages and to comments
|
2014-03-23 13:32:39 -06:00 |
|
Gregory Nutt
|
340afb2ef4
|
SAM4E-EK: Enable interrupt stack in all configurations
|
2014-03-23 10:12:57 -06:00 |
|
Gregory Nutt
|
d43cfeb6a6
|
SAM4E-EK UDP: prevent some bad recursive behavior
|
2014-03-22 17:30:17 -06:00 |
|
Gregory Nutt
|
a32e0e2b30
|
SAM4E-EK: Add an NSH configuration that uses a USB CDC/ACM console
|
2014-03-22 09:27:43 -06:00 |
|
Gregory Nutt
|
ba51d1d575
|
SAM4E UDP: Cosmetic updates to tracing and README
|
2014-03-21 10:45:12 -06:00 |
|
Gregory Nutt
|
b35fab2e9e
|
Cosmetic update to README
|
2014-03-20 15:21:26 -06:00 |
|
Gregory Nutt
|
b1c0739176
|
SAM4E UDP: Add support for USB monitor
|
2014-03-18 16:33:36 -06:00 |
|
Gregory Nutt
|
6b65388023
|
SAM4E: Revise board-specific USB MSC support
|
2014-03-18 09:31:02 -06:00 |
|
Gregory Nutt
|
37eafe2188
|
SAM4E-EK: NSH configuration now has DMA-based SPI and AT25 Serial FLASH suported enabled by default
|
2014-03-14 12:35:17 -06:00 |
|
Gregory Nutt
|
4f657b0577
|
SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work.
|
2014-03-13 15:54:09 -06:00 |
|
Gregory Nutt
|
6bc43d49c2
|
SAM4E: Fix EMAC pin configuration. Driver is basically functionaly now. SAM4E-EK NSH configuration now has networking enabled by default
|
2014-03-13 09:03:03 -06:00 |
|
Gregory Nutt
|
bd86f7f2d9
|
SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver
|
2014-03-12 15:03:59 -06:00 |
|
Gregory Nutt
|
f24afa80b2
|
SAM4E: Various bring-up fixes. NSH now works
|
2014-03-12 10:59:19 -06:00 |
|
Gregory Nutt
|
5786acb16e
|
SAM4E-EK: Purely cosmetic updates
|
2014-03-11 10:44:00 -06:00 |
|
Gregory Nutt
|
9bc92c640d
|
SAM4E-EK: Add basic board support
|
2014-03-10 15:18:46 -06:00 |
|