Adding the CONFIG_ARCH_PERF_EVENTS configuration to enable
hardware performance counting，solve the problem that some platform
hardware counting support is not perfect, you can choose to use
software interface.
This is configured using CONFIG_ARCH_PERF_EVENTS, so weak_functions
are removed to prevent confusion
To use hardware performance counting, must:
1. Configure CONFIG_ARCH_PERF_EVENTS, default selection
2. Call up_perf_init for initialization
Signed-off-by: wangming9 <wangming9@xiaomi.com>
The naming of the clang configuration file has changed after version 14
This commit will enable the compatibility with clang-14/15/16/17
Signed-off-by: chao an <anchao@xiaomi.com>
Fix buffer overflow issue from PR #10128, since the sizeof
xcpt_reg_t is different on 32/64 bit platform.
Signed-off-by: chenxiaoyi <chenxiaoyi@xiaomi.com>
Summary
Qemu virt board can choice CPU core with boot parameter
and we need to add Konfig option for choice
the change do this
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Sumary
add hostfs support for arm64, it's a copy
from arm32.
Note:
it's not support for opendir and readdir, command
like ls will not work.
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
add set/get_power operation for sim_framebuffer to avoid assert
in fb_ioctl(cmd= FBIOSET_POWER/FBIOGET_POWER)
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
In armv8m the FPSCR[18:16] LTPSIZE field must be set to 0b100 for
"Tail predication not applied" as it's reset value.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
1. virtio devics/drivers match and probe/remote mechanism;
2. virtio mmio transport layer based on OpenAmp (Compatible with both
virtio mmio version 1 and 2);
3. virtio-serial driver based on new virtio framework;
4. virtio-rng driver based on new virtio framework;
5. virtio-net driver based on new virtio framework
(IOB Offload implementation);
6. virtio-blk driver based on new virtio framework;
7. Remove the old virtio mmio framework, the old framework only
support mmio transport layer, and the new framwork support
more transport layer and this commit has implemented all the
old virtio drivers;
8. Refresh the the qemu-arm64 and qemu-riscv virtio related
configs, and update its README.txt;
New virtio-net driver has better performance
Compared with previous virtio-mmio-net:
| | master/-c | master/-s | this/-c | this/-s |
| :--------------------: | :-------: | :-------: | :-----: | :-----: |
| qemu-armv8a:netnsh | 539Mbps | 524Mbps | 906Mbps | 715Mbps |
| qemu-armv8a:netnsh_smp | 401Mbps | 437Mbps | 583Mbps | 505Mbps |
| rv-virt:netnsh | 487Mbps | 512Mbps | 760Mbps | 634Mbps |
| rv-virt:netnsh_smp | 387Mbps | 455Mbps | 447Mbps | 502Mbps |
| rv-virt:netnsh64 | 602Mbps | 595Mbps | 881Mbps | 769Mbps |
| rv-virt:netnsh64_smp | 414Mbps | 515Mbps | 491Mbps | 525Mbps |
| rv-virt:knetnsh64 | 515Mbps | 457Mbps | 606Mbps | 540Mbps |
| rv-virt:knetnsh64_smp | 308Mbps | 389Mbps | 415Mbps | 474Mbps |
Note: Both CONFIG_IOB_NBUFFERS=64, using iperf command, all in Mbits/sec
Tested in QEMU 7.2.2
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The first time interrupt nesting occurs between REE and TEE,
CURRENT_REGS needs to be set.
If TEE nesting REE breaks, then EXC_RETURN.S=0,EXC_RETURN.ES=1;
Conversely, EXC_RETURN.S=1,EXC_RETURN.ES=0;
Interrupt nesting between TEE and REE can be determined based
on the S and ES bits of EXC_RETURN.
Only once nesting between TEE and REE is supported, and cyclic
nesting between TEE and REE is not supported.
Signed-off-by: wangming9 <wangming9@xiaomi.com>
1、The process stack supports interrupt nesting, Execute in MSP;
2、The interrupt stack supports interrupt nesting;
The thread mode use PSP, and the handle mode use MSP;
3、Adjust arm_doirq、exception_common implementation to meet interrupt nesting
4、Adjust the conditions for returning MSP and PSP;
5、remove setintstack;
Signed-off-by: wangming9 <wangming9@xiaomi.com>
1、The process stack supports interrupt nesting, Execute in MSP;
2、The interrupt stack supports interrupt nesting;
The thread mode use PSP, and the handle mode use MSP;
3、Adjust arm_doirq、exception_common implementation to meet interrupt nesting
4、Adjust the conditions for returning MSP and PSP;
5、remove setintstack;
Signed-off-by: wangming9 <wangming9@xiaomi.com>
1、The process stack supports interrupt nesting, Execute in MSP;
2、The interrupt stack supports interrupt nesting;
The thread mode use PSP, and the handle mode use MSP;
3、Adjust arm_doirq、exception_common implementation to meet interrupt nesting
4、Adjust the conditions for returning MSP and PSP;
5、remove setintstack，add arm_initialize_stack;
Signed-off-by: wangming9 <wangming9@xiaomi.com>
VELAPLATFO-12536
This provides the initial hooks for Flattened Device Tree support
with QEMU RV. It also provides a new procfs file that exposes the
fdt to userspace much like the /sys/firmware/fdt endpoint in Linux.
See https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-firmware-ofw
Nodes in the fdt are not yet usable by the OS.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Signed-off-by: liaoao <liaoao@xiaomi.com>
For TEE & REE, securefault & busfault are not banked, so the faults can
only forword to TEE/REE.
But how to crash dump the other core which not handled faults ?
Here we provide a way to resolve this problem:
1. Set the securefault & busfault to TEE
2. busfault happend from TEE, then directly dump TEE
3. busfault happend from REE, then generate nonsecurefault
4. Back to REE, and dump
Signed-off-by: ligd <liguiding1@xiaomi.com>
We can use the driver in nuttx to download
files with debugger
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
FlexCAN before used interrupts to process incoming frames.
This patch adds a HPWORK workqueue to process incoming frames in the workqueue
context instead. Also renamed mbi to txmb for better readability.
This PR adds support for the StarFive JH7110 RISC-V SoC. This will be used by the upcoming port of NuttX for PINE64 Star64 SBC. [The source files are explained in the articles here](https://github.com/lupyuen/nuttx-star64)
Modified Files in arch/risc-v:
Kconfig: Added ARCH_CHIP_JH7110 for JH7110 SoC
New Files in arch/risc-v:
include/jh7110/chip.h: JH7110 Definitions
include/jh7110/irq.h: Support 127 External Interrupts
src/jh7110/chip.h: Interrupt Stack Macro
src/jh7110/jh7110_allocateheap.c: Kernel Heap
src/jh7110/jh7110_head.S: Linux Header and Boot Code
src/jh7110/jh7110_irq.c: Configure Interrupts
src/jh7110/jh7110_irq_dispatch.c: Dispatch Interrupts
src/jh7110/jh7110_memorymap.h: Memory Map
src/jh7110/jh7110_mm_init.c, jh7110_mm_init.h: Memory Mgmt
src/jh7110/jh7110_pgalloc.c: Page Allocator
src/jh7110/jh7110_start.c: Startup Code
src/jh7110/jh7110_timerisr.c: Timer Interrupt
src/jh7110/hardware/jh7110_memorymap.h: PLIC Base Address
src/jh7110/hardware/jh7110_plic.h: PLIC Register Addresses
src/jh7110/Kconfig: JH7110 Config
src/jh7110/Make.defs: Makefile
