Gregory Nutt
47d87fd857
configs/: Refresh ARM and Xtensa configurations.
2018-08-19 17:48:13 -06:00
Gregory Nutt
bbad69ab61
Change all occurrences of CONFIG_EXAMPLES_NSH* to CONFIG_SYSTEM_NSH* to match changes in the apps/ directory.
2018-08-18 09:14:59 -06:00
Gregory Nutt
dd899c0453
arch/arm/src/sam34: This commit removes support for the dedicated vector handling from the SAM3/4 architecture support. Only common vectors are now supported.
2018-06-19 18:13:15 -06:00
Gregory Nutt
dc8941e958
configs/: Add definition of strip to many Make.defs files.
2018-03-25 09:25:37 -06:00
Gregory Nutt
2284d045ff
configs/flipnclick-pic32mz and -sam3x: Generalize naming. HiletGo is one SSD1306 LCD, but the logic should work with any SSD1306. Naming need to be generalized to SSD1306 to make this reusability clear.
2018-02-13 19:16:57 -06:00
Gregory Nutt
4e32861c3c
Changes from review of last PR + some updated comments.
2018-02-11 16:42:37 -06:00
Gregory Nutt
d5522704b1
configs/flipnclick-sam3x: Adds basic board support for the HiletGo OLED.
2018-02-11 10:57:35 -06:00
Gregory Nutt
970bcef197
configs/flipnclick-pic32mz: Add support for PROCFS file system.
2018-02-08 10:06:43 -06:00
Gregory Nutt
c0a79a8e45
configs/flipnclick-sam3x: Fix an error in the control of one LED. LEDs should not be pulled up since they are active high.
2018-01-27 12:42:51 -06:00
Gregory Nutt
12e3e47d3c
Update comments, mostly spelling errors.
2018-01-27 09:37:46 -06:00
Gregory Nutt
23c6debc63
configs/flipnclick-sam3x: Update README and comments to discuss I2C access on all mikroBUS connectors.
2018-01-25 13:33:09 -06:00
Gregory Nutt
483dfe80d9
configs/flipnclick-pic32mz and flipnclick-sam3x: Update README and add pin definitions to support SPI on all mikroBUS connectors.
2018-01-25 12:45:02 -06:00
Gregory Nutt
633e90225e
configs/flipnclick-sam3x (also Arduio-Due): Remove disabling of environmont, mountpoints, and poll. Add NSH arch initialization so that procfs will be automounted. Increase task name size from 0 to 32. Update README.
2018-01-25 10:37:16 -06:00
Gregory Nutt
cafb527262
configs/flipnclick-sam3x: Using JTAG (vs. Bossac) I was finally able to load code and verify the basic NSH configuration. Updated READMEs. Also switched to USART0 (vs UART0) for the serial console because I was not getting bi-directional communication on the VCOM.
2018-01-24 08:52:40 -06:00
Gregory Nutt
0eca2c6fef
Update README files
2018-01-11 07:28:12 -06:00
Gregory Nutt
c367a223c5
Update README
2018-01-09 07:20:39 -06:00
Gregory Nutt
7d4451ee86
Squashed commit of the following:
...
configs/flipnclick-pic32mz: Switch the serial console to UART4. Clean up some minor issues the LED options.
configs/flipnclick-pic32mz: Add support for two on-board buttons: T1 and T2.
configs/flipnclick-pic32mz: Adds basic board support for the Mikroe Flip&Click PIC32MZ board. Initial commit is just the configs/pic32mz-starterkit with some name chanages.
2018-01-08 14:21:49 -06:00
Gregory Nutt
6fe1f5a96c
Squashed commit of the following:
...
arch/mips/src/pic32mz: Commits the basic architecture port for the PIC32MZEF.
arch/mips/src/pic32mz: Begin adding PIC32MZEF files. Initial commit are simply PIC32MZEC files with name changes.
arch/mips/include/pic32mz: Add support for the PIC32MZEF family.
2018-01-08 10:01:23 -06:00
Gregory Nutt
a0aec8ccde
configs/stm32f103-minimum: Add file that was included in the last patch.
2018-01-07 12:17:15 -06:00
Gregory Nutt
4227d11b6c
configs/flipnclick-sam3x: Update README and some comments.
2018-01-07 11:07:39 -06:00
Gregory Nutt
bc320c7878
configs/arduino-due and flipnclick-sam3x: Enable PROCFS in nsh configurations.
2018-01-06 17:54:48 -06:00
Gregory Nutt
ed18e427f3
Squashed commit of the following:
...
configs/flipnclick-sam3x: Add support for the 4 user-controllable LEDs on the board.
configs/flipnclick-sam3x: Add board support for the Mikroe Flip&Click SAM3X.
configs/arduino-due: Update this old configuration so that it is structured a little more like recent board support.
2018-01-06 17:06:50 -06:00
