sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
25,908 Commits 1 Branch 0 Tags 291 MiB
5a8f395a9b
Commit Graph

1805 Commits

Author SHA1 Message Date
Gregory Nutt
d58e4acf17 Remove whitespace from the end of lines 2016-05-25 08:48:55 -06:00
Gregory Nutt
51504a032e Oops... forgot to add PCF8574 LCD Backpack files before doing the commit. 2016-05-25 08:48:54 -06:00
Dave
dc1c27cee7 * This driver supports the 'I2C lcd backpack' design that is based on the PCF8574 io expander. There's a myriad of different vendors of such, but they are principally the same, save wiring and minor features like jumpers for I2C addresses. This driver supports known and unknown variants. 
*  The interface board supports HD44780-based LCD modules up to 4x32, and this driver accommodates all those formats.
 2016-05-25 08:06:32 -06:00
Gregory Nutt
5356e3d747 Since I can't (yet) get rid of the sanity checks in config.h, I suppose I should at least update the checks. 2016-05-11 11:07:00 -06:00
Frank Benkert
9eeb8634fc Improve the CAN error reporting by also report internal device driver errors. 2016-05-11 07:10:17 -06:00
Gregory Nutt
e523c93391 Several Makefiles: Add .PHONY definitions to prevent 'clean up to date' message weirdness. 2016-05-10 15:44:06 -06:00
Sebastien Lorquet
f4fa4799f7 Add a driver for SST26F spi/qspi flash devices (SPI mode only) 2016-05-10 11:09:15 -06:00
Gregory Nutt
050f544782 Fix typo in variable name in serial BREAK logic. Review other serial implementations for similar naming problems. 2016-05-05 11:30:47 -06:00
ziggurat29
d3fbd86657 bug in smart.c; return code of smart_scan not checked, can cause success result in failure case, leading to 'dev' pointer being invalid. 2016-04-27 19:33:45 -05:00
Sebastien Lorquet
9fd3db6293 PCA9555: Fix condition where GPIO interrupt is not re-enabled. 2016-04-20 09:59:16 -06:00
Gregory Nutt
e8f0965d35 Mostly cosmetic changes from review of last PR 2016-04-17 14:13:44 -06:00
ziggurat29
1b9d837df3 add MTD support for Micron N25Qxxx family of QSPI flash 2016-04-17 12:20:07 -05:00
Alan Carvalho de Assis
7f5339ee5a drivers/sensors/h1750fvi.c: Add a character driver for Rohm Ambient Light Sensor BH1750FVI. 2016-04-15 08:16:16 -06:00
Gregory Nutt
1f8212679c NRF24L01: Fix backward calculation of relative frequency. Noted by Henry Zhang 2016-04-15 07:07:22 -06:00
Gregory Nutt
84cd720479 FTL: Make it clear the the unlink method has not been implemented 2016-04-15 07:03:28 -06:00
Gregory Nutt
9008308b64 Remove some block comments before empty code sections 2016-04-11 18:16:04 -06:00
Gregory Nutt
8eb7898a91 RTC driver: A PID of zero should mean to notify the calling task 2016-04-10 09:12:50 -06:00
Gregory Nutt
3228d32938 Correct permmisions on executable scripts 2016-04-10 09:11:59 -06:00
Gregory Nutt
dc71a47df6 RTC: Fix some configuration issues when RTC_ALARM is disabled 2016-04-04 09:24:27 -06:00
Gregory Nutt
a44b0798e2 RTC driver: Needs to initialize state structure to zero on initalization 2016-04-03 12:40:25 -06:00
Gregory Nutt
ae95f6cdfd RTC: Fix some errors when RTC debug is enabled 2016-04-03 09:52:25 -06:00
Gregory Nutt
1135ce804d RTC: Extend interface by adding a method to set the alarm relative to the current time 2016-04-02 18:18:48 -06:00
Gregory Nutt
0723226bda RTC: Further simplications of the RTC driver interface; Add sample implem. 2016-04-02 13:55:58 -06:00
Gregory Nutt
58d6624f29 RTC: Simplify the RTC driver interface. Way too much stuff in that interface and it is not fully implemented anywhere. 2016-04-02 13:01:02 -06:00
Gregory Nutt
35ab1697cd CONFIG_DEV_RANDOM depends on CONFIG_ARCH_HAVE_RNG which is selected with MCU-specific RNG H/W is enabled. So correct default is y; you almost certainly want /dev/random as well. 2016-03-30 07:58:09 -06:00
Gregory Nutt
23142d91fa PM: Fix a compile error in a DEBUGASSERTion when DEBUG is enabled 2016-03-27 18:17:37 -06:00
Gregory Nutt
fbaee9db34 PM: Some cosmetic updates 2016-03-27 13:37:28 -06:00
Gregory Nutt
54dbec248e PM: Add domain to all PM interfaces. Internal PM data structures now handle multiple PM domains. 2016-03-27 13:03:47 -06:00
Gregory Nutt
dea4fe5d90 PM: Add activity domain to all PM callbacks 2016-03-27 11:19:39 -06:00
Gregory Nutt
970822b351 Add missing PM configuratin options to Kconfig file 2016-03-27 10:18:20 -06:00
Paul A. Patience
c62bb9beb1 Fix issues detected by cppcheck 2016-03-22 15:46:47 -04:00
Gregory Nutt
c49bd4179a Purely cosmetic 2016-03-20 18:44:44 -06:00
Andrew Tridgell
38eb8bb1b0 pipes: support FIONREAD and FIONWRITE ioctl on pipes; use semaphores for pipecommon_ioctl(). 2016-03-20 18:11:13 -06:00
Gregory Nutt
75a4a5dcbe Back part of a previous CDC/ACM change. Improve some Kconfig comments. 2016-03-19 12:45:33 -06:00
Gregory Nutt
deed28b8f2 USB composite: Fix some errors in conditional compilation 2016-03-19 08:08:40 -06:00
Gregory Nutt
9644d42e91 USB CDC/ACM device: Trivial configuration clean-up 2016-03-19 07:36:39 -06:00
David Sidrane
d2a017d9bb rdreqs was defined as CONFIG_CDCACM_NWRREQS size 2016-03-17 21:47:40 +00:00
David Sidrane
2cfa023039 RD - comments were for WR 2016-03-17 21:45:57 +00:00
Gregory Nutt
242f8ff25f drivers/syslog/note_driver.c: Add a driver that will allow an application to read buffered scheduler instrumentation data 2016-03-17 14:46:00 -06:00
Gregory Nutt
3ef25dc49d AT24xx: Add logic to unregister from the procfs file system if the driver is uninitialized 2016-03-17 09:55:10 -06:00
Max Neklyudov
1951b9df57 Improve m25px driver 2016-03-17 07:37:45 -06:00
Gregory Nutt
e879d0f423 Move scheduler instrumentation hooks out of sched.h (where they seem like application interfaces) and into nuttx/sched.h where it is clare that these are OS internal interfaces. 2016-03-16 11:00:31 -06:00
Frank Benkert
611fb04449 BlockToCharDev: increase sectorsize to 32 bit 2016-03-09 12:44:56 -06:00
Gregory Nutt
1c31e10397 NRF2410L: Add missing conditional logic in vtable initialization 2016-03-08 16:11:08 -06:00
Gregory Nutt
7fa0adff83 Fix a misplaced right bracket 2016-03-08 15:33:33 -06:00
Frank Benkert
4d9c41fd57 AT24XX: Correct address calculation in Multi-Block-Read 2016-03-08 15:31:23 -06:00
Gregory Nutt
0970d43ab8 Cosmetic changes to comments 2016-02-28 07:48:16 -06:00
Gregory Nutt
d777110cbe Eliminate a warning 2016-02-27 07:27:45 -06:00
Sebastien Lorquet
dc7adfa817 drivers/wireless/ieee802154/Kconfig 
drivers/wireless/ieee802154/Make.defs
    Changes to the build infrastructure to include the mrf24j40 driver

include/nuttx/spi/spi.h
    Define a IEEE SPI device

include/nuttx/wireless/ieee802154/ieee802154_radio.h
    This file defines the API of a IEEE 802.15.4 radio device, to be used by the future common MAC 802.15.4 layer

drivers/wireless/ieee802154/mrf24j40.c
drivers/wireless/ieee802154/mrf24j40.h
    The main MRF24J40 IEEE 802.15.4 radio driver

include/nuttx/wireless/ieee802154/mrf24j40.h
    This file allows instanciation of the MRF24j40 driver from board configurations
 2016-02-26 18:39:27 -06:00
Gregory Nutt
1ecb092e51 Add wireless/ieee802154 to the build 2016-02-26 17:27:58 -06:00
Gregory Nutt
cfe018e991 Rename CONFIG_WIRELESS to CONFIG_DRIVERS_WIRELESS 2016-02-26 16:50:26 -06:00
Gregory Nutt
309beae2cd Move drivers/ieee802154 to drivers/wireless/ieee802154; rename include/nuttx/net ieee802154 to 6lowpan.h 2016-02-26 15:03:16 -06:00
Gregory Nutt
6481aa8a3d Remove drivers/ieee802154/skeleton.c 2016-02-26 11:20:07 -06:00
Gregory Nutt
2f28ca86c2 Clean up some naming; rename net/ieee802154 to net/6lowpan 2016-02-26 10:08:36 -06:00
Gregory Nutt
9ff645a298 drivers/ieee802154: Add a skeleton IEEE802154 driver 2016-02-25 15:11:30 -06:00
Gregory Nutt
b6f5ffa9a8 CDC/AC: too man right parentheses if IFLOW_CONTROL enabled 2016-02-24 11:54:02 -06:00
Frank Benkert
35df528f69 PCA9555: Remove duplicate variable declaration 2016-02-23 07:33:52 -06:00
Alan Carvalho de Assis
ea15ead6cc RGB LED driver 2016-02-22 08:43:32 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Gregory Nutt
2244ed46bc nuttx/drivers: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 07:32:58 -06:00
Gregory Nutt
bf8120d51d Fix some odd logic in CC3000 semaphore handling. Noted by Vladimir Komendantskiy 2016-02-10 09:50:28 -06:00
Gregory Nutt
216eea4543 Net: Fix some errors introduced into the ENC28J60 driver; fix type of wd_start arguments. 2016-02-04 08:55:10 -06:00
Gregory Nutt
cea3854dea PCA5555: Add logic to make the driver thread safe. Problem noted by Stefan Kolb. 2016-02-03 12:39:11 -06:00
Gregory Nutt
dea24c503a Networking: Remove the HSEC argument from devif_timer. 2016-02-03 12:12:41 -06:00
Gregory Nutt
ff1e057364 Missed one EMAC driver in the last commit 2016-02-03 10:55:51 -06:00
Gregory Nutt
42c365aab1 Duplicate Manuel's EMAC driver fix to every other driver that supports CONFIG_NET_NOINTS 2016-02-03 10:34:10 -06:00
Gregory Nutt
8fa9b99e7c I2C driver should support the RESET method as well 2016-02-03 07:32:25 -06:00
Gregory Nutt
be3e86ec89 Fix a typo in a DEBUGASSERT statement 2016-02-02 14:41:25 -06:00
Gregory Nutt
e5d86dd3fc Oops. Apparently a copy'n'paste was accidentally a cut'n'paste 2016-02-02 12:53:32 -06:00
Gregory Nutt
9ce58ad5b7 I2C: up_i2creset should not be a global function; Now it is an I2C interface method 2016-02-02 11:21:48 -06:00
Gregory Nutt
4a34a199dd I2C: Add an I2C character driver 2016-02-02 08:30:54 -06:00
Gregory Nutt
009e9f76cb I2C: Fixes/improvements from last massive I2C commits 2016-02-02 07:13:03 -06:00
Gregory Nutt
456b5f06dc Clean up some comments 2016-02-01 19:52:16 -06:00
Gregory Nutt
4cfbe50c0d I2C: Fix some compile time issues found with tools/testbuild.sh 2016-02-01 18:02:56 -06:00
Gregory Nutt
69ce24c70c I2C: Remove the setfrequency method from the interface 2016-02-01 16:31:13 -06:00
Gregory Nutt
6ad641888b Add I2C frequency to the i2c_msg_s structure 2016-02-01 14:17:20 -06:00
Gregory Nutt
f9053182d3 I2C: Remove setaddress method 2016-02-01 12:14:31 -06:00
Gregory Nutt
8c9bddf998 I2C: Eliminate the I2C_WRITE and I2C_READ macros 2016-02-01 08:57:22 -06:00
Gregory Nutt
10000841a8 The I2C_TRANSFER method is no longer optional 2016-01-31 14:16:05 -06:00
Gregory Nutt
3a781a2d3f Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s. 2016-01-30 08:36:47 -06:00
Gregory Nutt
ceb415204e Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h 2016-01-30 08:00:16 -06:00
Vladimir Komendantskiy
19feab1bd6 drivers/modem/u-blox.c and include/nuttx/drivers/u-blox.h: Add an upper half driver for the U-Blox Modem. From Vladimir Komendantskiy 2016-01-30 07:37:43 -06:00
Gregory Nutt
ca792558bf Update ChangeLog; add ADS1242 driver to build system; fix some typos; eliminate some warning 2016-01-29 07:55:39 -06:00
Entinger Alexander
dc8c14aa53 Driver for the 24-Bit Differential Input ADC ADS1242 that communicates via SPI with a MCU. Reading the ADC conversion result as well as configuring the ADC, setting the input channel, etc. is implemented via ioctl calls. However, it does not yet implement the standard ADC interface. 2016-01-29 07:41:23 -06:00
Gregory Nutt
fd896330d8 Remove the final vestiges of up_spiinitialize() 2016-01-27 09:27:56 -06:00
Gregory Nutt
efb5674742 drivers/ioexpander/pca9555: Now uses i2c_read and i2c_write instead of I2C_READ and I2C_WERITE 2016-01-26 11:07:47 -06:00
Gregory Nutt
b6b3c2be3e Add I2C_TRANSFER based wrappers for I2C_TRANSFER as well 2016-01-26 10:57:51 -06:00
Gregory Nutt
d4a53ee131 I2C: Eliminate the I2C_WRITEREAD method 2016-01-26 10:26:16 -06:00
Gregory Nutt
67f38169b2 drivers/i2c: Move wrapper that implements I2C_WRITEREAD using I2C_transfer from pc9555.c to a new, comon i2c directory 2016-01-26 09:58:18 -06:00
Gregory Nutt
f74fbecf52 PCA9555 I/O expander: Fix an error in addressing noted by Stefan Kolb; convert to use I2C_TRANSFER instead of I2C_WRITEREAD which is not thread safe 2016-01-26 07:59:36 -06:00
xuhang
26d40fa80c drivers/usbhost/hid_parser.c: Wrong size used in memcpy() 2016-01-25 20:00:11 -06:00
Gregory Nutt
b6e128a4ce Merge branch 'master' of bitbucket.org:patacongo/nuttx 2016-01-24 09:15:29 -06:00
Gregory Nutt
564a1ce606 Cosmetic clean-up of comments 2016-01-24 08:21:55 -06:00
Gregory Nutt
31cf7e0900 Fix missing semicolon 2016-01-23 21:21:15 -06:00
Gregory Nutt
d87f7e99d2 NOkia LCD needs to initialize SPI before using it 2016-01-23 19:45:30 -06:00
Gregory Nutt
7ee6c5bcfc Minor clean-up for last big commit 2016-01-23 19:18:55 -06:00
Gregory Nutt
7edf921c5e Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:54:36 -06:00
Gregory Nutt
f6e49caba8 All SPI-based device drivers needs to call SPI_HWFEATURES() with zero in order to co-exist with drivers that use H/W features 2016-01-23 16:18:13 -06:00
Gregory Nutt
accd99db25 Add an optional hwfeatures method to the SPI interface 2016-01-23 15:12:45 -06:00
Stefan Kolb
2b05f3e830 I/O Expander: Fix some bad macros, make naming consisted 2016-01-22 07:08:59 -06:00