sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
38,648 Commits 1 Branch 0 Tags 291 MiB
5c2750a960
Commit Graph

30 Commits

Author SHA1 Message Date
Brennan Ashton
26395a6908 mmcsd: Allow setting ID mode frequency vi Kconfig 
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
 2020-09-16 03:13:43 -07:00
Gregory Nutt
21aef0dd68 drivers/*/Kconfig: Consolidate driver Kconfig Files. 
This commit does two things:

1. First, it reorganizes the driver Kconfig files so that each is self contained.  Before, a part of the driver configuration was in drivers/Kconfig and the rest was in in drivers/xyz/Konfig.  Now, all of the driver configuration is consolitated in the latter.

2. Second, this commit correct numerous serious errors introduced in a previous reorganization of the driver Kconfig files.  This was first noted by Nicholas Chin in PR270 for the case of the drivers/i2c/Kconfig but some examination indicates that the error was introduced into several other Kconfig files as well.

The nature of the introduced error was basically this:

- Nothing must intervene between the menuconfig selection and the following conditional configuration otpions.
- A previous PR erroneously introduced unconditional options between the menuconfig and the following confditional logic, thus corrupting the driver menus.

This error was easy to make because the driver Kconfig files were not well modularized.  Making them fully self-contained should eliminate this kind of error in the future.
 2020-02-15 15:19:11 +01:00
Xiang Xiao
3cb259daa6 drivers/Kconfig: Move if/endif to subfolder Kconfig 
Move if/endif to subfolder Kconfig and make ARCH_HAVE_XXX option always selectable by moving out of if/endif
 2020-02-08 08:04:05 -06:00
Xiang Xiao
ac2aec96e0 Refine Kconfig under drivers folder 
1.Move subsystem config into sub folder
2.Remove the duplicated if/endif

Change-Id: I0b96ac0570ee1ba62bbb95586381f5410b90bcf0
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2020-02-06 08:47:30 -03:00
Gregory Nutt
5c8831c886 drivers/mmcsd/Kconfig: Remove executable bit from file permissions. 2018-10-30 09:48:53 -06:00
Gregory Nutt
4e5cf1229c drivers/mmcsd/Kconfig: three configuration settings were within ifdef/endif and led to warning: xxx selects xxxx which has unmet direct dependencies. Fix by moving settings to drivers/Kconfig and outside of the ifdef-endif. Also renamed CONFIG_SDIO_PREFLIGHT to CONFIG_ARCH_HAVE_SDIO_PREFLIGHT to follow naming of similar hidden architecture capability configurations. 2018-08-05 17:58:17 -06:00
Gregory Nutt
92890552f1 drivrs/mmcsd: Partial reversion of commit 17b6c7ba39. Backed out all block callback logic controlled CONFIG_SDIO_BLK_CALLBACK. Usage of this feature by applications is a blatant violation of the POSIX interface standard. 2018-07-20 10:08:01 -06:00
Bob Feretich
17b6c7ba39 drivers/mmcsd/mmcsd_sdio.c: Fix an error that was causing SDIO multiple block transfers from achieving full performance. Also adds a feature controlled by CONFIG_SDIO_BLK_CALLBACK that bypasses the normal mechanism for obtaining sector data for transfer. 2018-07-20 09:55:33 -06:00
Alan Carvalho de Assis
283b73edc5 Fix lots of typos in C comments and Kconfig help text 2018-07-08 18:24:45 -06:00
Gregory Nutt
c867d42018 arch/arm/src/lpc54xx: Add support for card detect and write protect to SDMMC driver. configs/lpcxpresso-lpc54628: Add logic to bring up SDMMC. 2017-12-20 10:52:05 -06:00
Gregory Nutt
764f503150 Remove duplicate setting for SDIO_DMA from drivers/mmcsd/Kconfig 2017-02-06 13:16:52 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
83d6e6403c drivers/mmcsd/Kconfig: ARCH_HAVE_SDIOWAIT_WRCOMPLETE should not depend on MMCSD_SDIO 2015-01-09 07:21:43 -06:00
Gregory Nutt
089e001874 STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y 2015-01-08 18:12:06 -06:00
Gregory Nutt
f787440a04 STM32 SDIO: Don't let architectures select CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE unless they have implemented SDIOWAIT_WRCOMPLETE 2015-01-08 17:47:34 -06:00
Gregory Nutt
1842525cc2 MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy. 
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.

This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.

From David Sidrane
 2015-01-08 06:23:42 -06:00
Gregory Nutt
944e0fe81d Changes to stm32_dmacapable interfaces from Mike Smith 2013-10-18 08:06:23 -06:00
Gregory Nutt
da4cebf572 SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA 2013-08-10 18:01:23 -06:00
Gregory Nutt
968b2553cd Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level 2013-08-10 09:06:53 -06:00
Gregory Nutt
b9ad057972 MMC/SD driver needs to manage SPI mode and data width as well 2013-06-17 12:31:24 -06:00
patacongo
d9992b32c7 LPC17 LCD driver is code complete and in need of testing 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5788 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-26 20:06:53 +00:00
patacongo
18ca1965b6 AT91SAM3 now supports kernel-mode heap; SAM3U-EK knsh configuration converted to use kconfig-frontends tool 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5726 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-10 19:31:10 +00:00
patacongo
29cdbe6143 Beginnings of definitions for the LPC1788; convert olimex-lpc1766stk to use kconfig-frontends 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5533 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-18 16:37:37 +00:00
patacongo
8010efe1f5 Misc fixes for LM3S kconfig-frontends build 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5472 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-02 14:02:07 +00:00
patacongo
afa9c90b38 Add board support at configs/zp214xpa for the The0.net ZP213X/4XPA board with the LPC2148; Add configurations sim/nxlines. convert mcu123-lpc214x/nsh to use the kconfig-frontends. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5465 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-28 23:40:54 +00:00
patacongo
d2ef49c64e More Shenzhou board logic 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5111 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-08 02:10:56 +00:00
patacongo
1dc41e329b Kconfig update 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4599 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-13 14:27:44 +00:00
patacongo
330b89ca0e Add kconfig documentation 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4567 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-06 16:45:52 +00:00
patacongo
4b8c0c41c8 Adding skeleton Kconfig files (part 1 of 2) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4564 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-06 15:49:35 +00:00