Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
After these wdog refactor:
We conducted a latency measurement using the rt-tests/cyclictest (commit cadd661) on an x86_64 NUC12 equipped with an i7-1255U processor and 16GB of LPDDR5 memory. The specific command used for this microbenchmark was cyclictest -q -l 100000 -h 30000, which is designed to assess the responsiveness of the cyclic timer.
The findings from our benchmark are summarized below, highlighting the minimum, median, and maximum latency values for each operating system tested:
Operating System Minimum Latency (us) Median Latency (us) Maximum Latency (us)
Linux 48 53 410
PreemptRT 6 57 148
Xenomai 53 53 64
NuttX 64 626 1212
NuttX (refactor) 1 1 3
In this table, "Min" indicates the shortest latency observed, "Median" represents the middle value of the latency distribution, and "Max" denotes the longest latency encountered.
The systems tested were as follows:
Linux: ACRN version 6.1.80 (commit f528146)
PreemptRT: Linux kernel 5.4.251 with the 5.4.254-rt85 patch applied
Xenomai: Linux kernel 5.4.251 patched with ipipe-core-5.4.239-x86-13
These results clearly demonstrate the varying performance of different operating systems in terms of timer latency, the refactored NuttX showing particularly low latency values.
Signed-off-by: ligd <liguiding1@xiaomi.com>
Now we have CONFIG_USEC_PER_TICK, and for our timer system, all the calculation used 'tick'.
And all the timespec should change to 'tick' before use wd_start(), so USEC2TICK() can NOT be avoided.
Then there must be an 'less then one tick' loss.
One resolution:
ticks++ anyway when wd_start(). But this will caused time expired more a tick.
Another resolution:
Change the testcase, and allow the following logic:
t1 = current_time();
sleep(3);
t2 = current_time();
allow: t2 - t1 >= 3;
(original test must be: t2- t1 > 3)
The original test think the time must be elapse-ing, and the (t2 - t1) must bigger then 3,
but in our system, we use 'tick' as the minimal wdog unit, then there must a precision loss.
Now we choose first resolution.
Signed-off-by: ligd <liguiding1@xiaomi.com>
For the nested interrupt, one thing should decleared:
We are in ISR context, but no meaning we are disabled the interrupts.
Signed-off-by: ligd <liguiding1@xiaomi.com>
This patch moved the g_wdtimernested to wd_start.c
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
If g_wdactivelist has been changed in the wdog callback, the list traversal with next pointer will cause problem.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
This commit refactors the wdog module to use absolute time representation internally. The main improvements include:
1. Fixed recursive watchdog handling caused by calling wd_start within watchdog timeout callback function.
2. Simplified timer processing to improve performance and enhance code readability.
3. Improved accuracy of timers.
4. Reduced critical section and interrupt disable time, improving real-time performance.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
In the 'wd_timer',the callback function executed by 'wd_expiration' could call wd_start,and g_wdtickbase might be updated.Subsequently, g_wdtickbase is incremented by the value of ticks, causing g_wdtickbase to be greater than the actual passage of time.
Signed-off-by: yangguangcai <yangguangcai@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
Summary:
- Support arm64 pmu api, Currently only the cycle counter function is supported.
- Using ARM64 PMU hardware capability to implement perf interface, modify all
perf interface related code.
- Support for pmu init under smp.
Signed-off-by: wangming9 <wangming9@xiaomi.com>
Compilation error occurs after SCHED_CRITMONITOR is enabled
sched/sched_critmonitor.c:315: undefined reference to `serr'
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Add a comment briefly explaining why one timer tick is added to the watchdog delay. This has confused a lot of people and has resulted in numerous awkward discussions and ill-informed attempts to modify the code to remove that addition. Perhaps a rather lengthy comment will reduce that confusion and put an end to this thrashing.
In scene with CONFIG_SCHED_TICKLESS but no CONFIG_SCHED_TICKLESS_ALARM
The system may crash by assert
`up_assert: Assertion failed at file:wdog/wd_start.c line: 379 task: rptun`
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
when enable SYSTEM_TIME64, tick may exceed the int32 range
example:
pthread_cond_clockwait
---->clock_abstime2ticks
---->wd_start
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
If statement in line 103 could acces wdactivelist.head->lag when head was
NULL which could result in hard fault. The statement was also redundant
as the same condition is checked in the while loop below. This change
remove the if statement to prevent hard fault to occur.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
Squashed commit of the following:
Trivial, cosmetic
sched/, arch/, and include: Rename task_vforkstart() as nxtask_vforkstart()
sched/, arch/, and include: Rename task_vforkabort() as nxtask_vforkabort()
sched/, arch/, and include: Rename task_vforksetup() as nxtask_vfork_setup()
sched/: Rename notify_cancellation() as nxnotify_cancellation()
sched/: Rename task_recover() to nxtask_recover()
sched/task, sched/pthread/, Documentation/: Rename task_argsetup() and task_terminate() to nxtask_argsetup() and nxtask_terminate(), respectively.
sched/task: Rename task_schedsetup() to nxtask_schedsetup()
sched/ (plus some binfmt/, include/, and arch/): Rename task_start() and task_starthook() to nxtask_start() and nxtask_starthook().
arch/ and sched/: Rename task_exit() and task_exithook() to nxtask_exit() and nxtask_exithook(), respectively.
sched/task: Rename all internal, static, functions to begin with the nx prefix.
