There is no control over whether a valid index is input when user use
ioctl to get netdev information, so removing this assertion will allow
ENODEV to be returned.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Updated alt1250 driver with regarding to the following changes.
- Add LTE hibernation feature
- Split source code per module
- Some refactoring
- Some bug fixes
ICMP's conn->dev is changing in icmp_sendmsg, when sending to different
address, or when error occurs (like NETDEV_DOWN). Then the poll callback
cannot be dropped from previous dev in free, because the dev is wrong.
So add dev to struct icmp_poll_s just like struct udp_poll_s.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When a task needs to send data, a callback is allocated and the
transmission is happening in a worker task through devif_send.
Synchronization between the two tasks (sender & worker) is
achieved by a semaphore.
If devif_send fails, this semaphore was never posted, leaving
the sending task blocked indefinitely. This commit fixes this
by checking the return code of netif_send, and posting this
semaphore in case of failure.
Polling then stops, and execution is resumed on the sending
task.
warning: (NET_SOLINGER) selects NET_UDP_NOTIFIER which has unmet direct dependencies
(NET && NET_UDP && !NET_UDP_NO_STACK && SCHED_WORKQUEUE)
Signed-off-by: chao an <anchao@xiaomi.com>
Problem:
When tcp_close_work starts to run in LPWORK, if another event comes and
calls tcp_free before tcp_close_work takes net_lock, the tcp_free will
be called twice and cause double free.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
This is a refactored version of the SLIP network driver. Updates
include:
1. The original design started two kernel threads per SLIP device.
The refactored version uses file_poll to essentially be driven
by the UART RX and TX interrupts and pushes work to the low
priority work queue.
2. The SLIP byte un-/stuffing is more efficient now, using memcpy
instead of handling each byte individually.
3. The switch of the old SLIP driver to IOBs caused buffer overwrites
if packets were sent that would not fit into a single IOB. This is
fixed now.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
When do socket bind, if the connection domain is not equal to the bound address type, this will cause the stack-buffer-overflow.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
- NewReno congestion control algorithm is used to solve the problem
of network congestion breakdown. NewReno congestion control includes
slow start, collision avoidance, fast retransmission, and fast
recovery. The implementation refers to RFC6582 and RFC5681.
- In addition, we optimize the congestion algorithm. In the conflict
avoidance stage, the maximum congestion window max_cwnd is used to
limit the excessive growth of cwnd and prevent network jitter
caused by congestion. Maximum congestion window max_cwnd is updated
with the current congestion window cwnd and the update weight is
0.875 when an RTO timeout occurs.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
recvmsg() will incorrectly return 0 if the count of sema before waiting is greater than 0,
This commit will reinitialize the sema count before waiting:
1181 static ssize_t rpmsg_socket_recvmsg(FAR struct socket *psock,
1182 FAR struct msghdr *msg, int flags)
1183 {
...
1255 ret = net_sem_timedwait(&conn->recvsem,
1256 _SO_TIMEOUT(conn->sconn.s_rcvtimeo)); // recvsem.sem_count == 1; return 0
...
1264 if (!conn->recvdata) // recvdata not consumed; goto else
1265 {
1266 ret = conn->recvlen;
1267 }
1268 else
1269 {
1270 conn->recvdata = NULL;
1271 }
...
1282 return ret; // BUGON! incorrectly return 0 to user
1283 }
Signed-off-by: chao an <anchao@xiaomi.com>
Added simple support for IPV6_UNICAST_HOPS and IPV6_UNICAST_HOPS, the application can configure the ttl parameters of the socket in user mode.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
RFC 1191
When a router is unable to forward a datagram because it exceeds the
MTU of the next-hop network and its Don't Fragment bit is set, the
router is required to return an ICMP Destination Unreachable message
to the source of the datagram, with the Code indicating
"fragmentation needed and DF set". To support the Path MTU Discovery
technique specified in this memo, the router MUST include the MTU of
that next-hop network in the low-order 16 bits of the ICMP header
field that is labelled "unused" in the ICMP specification [7]. The
high-order 16 bits remain unused, and MUST be set to zero. Thus, the
message has the following format:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 3 | Code = 4 | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| unused = 0 | Next-Hop MTU |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Internet Header + 64 bits of Original Datagram Data |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
RFC 1185
Packet Too Big Message
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Code | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| MTU |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| As much of invoking packet |
+ as will fit without the ICMPv6 packet +
| exceeding 576 octets |
IPv6 Fields:
Destination Address
Copied from the Source Address field of the invoking
packet.
ICMPv6 Fields:
Type 2
Code 0
MTU The Maximum Transmission Unit of the next-hop link.
Description
A Packet Too Big MUST be sent by a router in response to a packet
that it cannot forward because the packet is larger than the MTU of
the outgoing link. The information in this message is used as part
of the Path MTU Discovery process [RFC-1191].
Signed-off-by: wangchen <wangchen41@xiaomi.com>
Commit 4d6a8663fa made pipes and
named pipes block when opening for O_WRONLY or O_RDONLY. Local
sockets, however, require `local_open_client_tx` to be non-blocking
to enable the server side to prevent the server side from blocking.
If set otherwise, it would deadly block. This commit sets the FIFO
as non-blocking temporarily, open the TX side and, if originally
blocking - restores it to that state.
added IPV6_RECVHOPLIMIT support so that fd of SOCK_RAW ICMPV6 can obtain ttl
information, some network related tools use this feature.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
utils/net_cmsg.c: In function 'cmsg_append':
utils/net_cmsg.c:82:23: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
82 | msg->msg_control += cmsgspace;
| ^~
cc1: all warnings being treated as errors
Using void pointers in arithmetic operations is a GCC extension, it is
not supported by the standard. Because what is the size of a void ?
move the IPPROTO_IP/IPPROTO_IPV6 flag into the socket_conn_s structure to
make it more than just control udp.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The third-party library we are porting will send and receive ICMPV6 messages
(router_advert / router_solicit / neighbor_advert / neighbor_solicit etc.)
from the user mode itself, so we added the SOCK_RAW related implementation
for ICMPV6.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
since iob offload, ipvx_dev_forward will remove d_iob, if there are multiple
devices, d_iob will be NULL when dev_forward is entered second time. and the
device that receives the packet cannot process the packet after forwarding it
so the iob copy is added.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
- Before IOB offload, srcaddr / src_addr_size / ifindex are written into
IOB by iob_trycopyin, so io_pktlen > 0 is always true, this check is
correct at that time. (It won't fail with zero-length UDP datagram.)
- After IOB offload, srcaddr / src_addr_size / ifindex are written into
offset 0, without increasing io_pktlen. So this check will fail with
zero-length UDP datagram now.
- We need to support zero-length UDP datagram and this check is
unnecessary at this point.
- https://stackoverflow.com/questions/5307031/how-to-detect-receipt-of-a-0-length-udp-datagram
- https://github.com/apache/nuttx/blob/nuttx-12.1.0/net/udp/udp_callback.c#L214
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
we encounter some situations where the structure is not defined, or the
returned data types do not match the expectations. Refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
If TCP_FIN is received before the user calls accept, the later accept will
report an error, then the previously received data cannot be read.
operation flow:
tcp_server_listen -> tcp_client_connect -> tcp_client_send ->
tcp_client_close -> tcp_server_accept(fix this error) -> tcp_server_recv
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
adapts to third-party code compilation. in the process of porting ConnMan,
multiple control message options are enabled, such as IPV6_RECVPKTINFO and
IPV6_RECVHOPLIMIT, so I changed the Filling implementation of the control
message.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Timestamp location in can message has changed,
In the original logic timestamp is saved at the end of the data segment:
io_data
-------------------------------------------------
| CAN message | Time Stamp |
-------------------------------------------------
|<--------------- io_len ---------------->|
In the new structure timestamps will reuse NET_LL_GUARDSIZE to isolate CAN messages:
io_data io_offset
-------------------------------------------------
| Time Stamp | CAN message |
-------------------------------------------------
|<-------- io_len --------->|
This PR will:
1. Increase NET_LL_GUARDSIZE to 16 (sizeof(struct timeval)) if NET_CAN && NET_TIMESTAMP are enabled
2. Apply timestamp to adapt to the new structure
Signed-off-by: chao an <anchao@xiaomi.com>
We have a case that an http server gives out-of-ordered ACKs, and NuttX client makes `ofoseg`s with length 0, trying to rebuild / put them into `ofosegs` array, which is not intended (no available data and should be skipped). This breaks later logic and finally crashed in `tcp_ofoseg_bufsize` (`ofosegs[i].data` is `NULL`, which should never happen in normal logic).
Note:
- `iob_trimhead` won't return `NULL` when it's applying on normal IOB.
- Keep `dev->d_iob == NULL` to avoid `iob_trimhead` changed.
- `iob_free_chain` will do nothing when applied to `NULL`.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
