Gregory Nutt
|
f91c608d4c
|
dd support for a USB keyboard as the NxConsole and text widget input. Not fully functional as of this initial check-in. Basic functionality is there, but there are conditions were the keyboard gets lost.
|
2014-07-30 17:01:51 -06:00 |
|
Gregory Nutt
|
376a7bcc12
|
Costmetic: Update TODO list, README files, refreshed configuration, updated comments
|
2014-07-30 14:26:50 -06:00 |
|
Gregory Nutt
|
a422cd951b
|
Update ChangeLog
|
2014-07-30 11:22:42 -06:00 |
|
Gregory Nutt
|
276cc44878
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
bb06d31038
|
Auto-mounter: Fix state setting. Not harmful other than it can cause a debug assertion to fire if you manually unmount the media before removing it which is, of course, what you are supposed to do.
|
2014-07-30 11:05:08 -06:00 |
|
Gregory Nutt
|
f492e0f094
|
Update ChangeLog
|
2014-07-30 10:20:56 -06:00 |
|
Gregory Nutt
|
4df0fbec04
|
SAMA5D HSMCI: Fix a problem on card insertion/removal callback handling. Interrupts were being disable so that the callbacks occurred with interrupts disabled. This resulted in loss of some interrupts and some not-so-good behaviors. The solution is to perform all callbacks on the work thread unconditionally (2014-7-29).
|
2014-07-30 10:19:41 -06:00 |
|
Gregory Nutt
|
9c80dfb31c
|
Updated README file, cosmetic changes to comments and debug output
|
2014-07-30 10:19:09 -06:00 |
|
Gregory Nutt
|
fd98a31014
|
Update ChangeLog
|
2014-07-29 21:15:02 -06:00 |
|
Gregory Nutt
|
70be3bae16
|
SAMA5D HSMCI: Add method to do RX transfer without DMA. The 8-byte SCR transfer was failing silently with the DMA transfer, leaving the SD card in single bit mode
|
2014-07-29 21:13:28 -06:00 |
|
Gregory Nutt
|
be8fe9a311
|
Costmetic update to comments
|
2014-07-29 20:03:52 -06:00 |
|
Gregory Nutt
|
941df0945a
|
Update TODO listi and README
|
2014-07-29 20:02:34 -06:00 |
|
Gregory Nutt
|
d5fa0ab153
|
Update ChangeLog
|
2014-07-29 16:39:18 -06:00 |
|
Gregory Nutt
|
a826adb679
|
The SAMA5D4-EK NSH and NxWM configurations now have the auto-mounter configured to automatically mount the FAT file system on HSMCI0 at /mnt/sdcard
|
2014-07-29 16:36:15 -06:00 |
|
Gregory Nutt
|
3d49eadc80
|
Cosmetic updates to comments and README files and some naming
|
2014-07-29 16:35:47 -06:00 |
|
Gregory Nutt
|
d547e59767
|
Minor warning/latent bug clean-up of auto-mounter logic
|
2014-07-29 16:35:17 -06:00 |
|
Gregory Nutt
|
adbc8df0f1
|
Update ChangeLog
|
2014-07-29 15:35:26 -06:00 |
|
Gregory Nutt
|
7b1b915226
|
SAMA5D4: Add auto-mounter support for HSMCI0
|
2014-07-29 15:34:31 -06:00 |
|
Gregory Nutt
|
31d21640af
|
Update the automounter so that it will handle the initial insertion state
|
2014-07-29 13:00:35 -06:00 |
|
Gregory Nutt
|
35d8e3bfcb
|
Update ChangeLog
|
2014-07-29 12:52:21 -06:00 |
|
Gregory Nutt
|
8e506be4dd
|
Add support for an automounter that will automatically mount and unmount a file system a media is inserted and removed
|
2014-07-29 12:50:08 -06:00 |
|
Gregory Nutt
|
b7227f0088
|
Cosmetic changes, mostly to comments
|
2014-07-29 12:49:40 -06:00 |
|
Gregory Nutt
|
551b106e2b
|
SAMA5: Poll USB keyboard at a higher rate for better response
|
2014-07-29 08:57:35 -06:00 |
|
Gregory Nutt
|
2861636015
|
Cosmetic changes to comments
|
2014-07-29 07:17:01 -06:00 |
|
Gregory Nutt
|
7c4127c836
|
Update ChangeLog
|
2014-07-29 07:14:30 -06:00 |
|
Gregory Nutt
|
53930d5531
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
1b6eec572d
|
Cosmetic changes to comments
|
2014-07-29 07:11:16 -06:00 |
|
Gregory Nutt
|
a428bb753f
|
SAMA5D4-EK: Disable PMIC workaround... it does not work
|
2014-07-28 17:48:55 -06:00 |
|
Gregory Nutt
|
8c2b458d75
|
Fixes to last SAMA5 PMIC checkin
|
2014-07-28 17:09:37 -06:00 |
|
Gregory Nutt
|
5aedec7c02
|
Update ChangeLogs
|
2014-07-28 16:35:22 -06:00 |
|
Gregory Nutt
|
950a6979ec
|
SAMA5D4-EK: Add logic to disable the faulty PMIC. This must be done with JP23 open. It is perfomed only from the DRAMBOOT loader
|
2014-07-28 16:34:19 -06:00 |
|
Gregory Nutt
|
75daeb75a3
|
Fix some compile problems with the WM8904 driver due to recent audio subsystem changes
|
2014-07-28 16:33:25 -06:00 |
|
Gregory Nutt
|
ca67a71b14
|
Update ChangeLogs
|
2014-07-28 12:49:24 -06:00 |
|
Gregory Nutt
|
5e9a388ebd
|
PCM decoder: Fix a logic error in a DEBUG assertion
|
2014-07-28 12:45:22 -06:00 |
|
Gregory Nutt
|
056de6d125
|
Update ChangeLogs
|
2014-07-28 07:25:32 -06:00 |
|
Gregory Nutt
|
d450993f2e
|
LPC17xx: DC updates from Max. Also fixes some syntax errors that I introduced in the last commit.
|
2014-07-28 07:23:49 -06:00 |
|
Gregory Nutt
|
1da856cca9
|
PCM: Forget to increment pointers in one part of sub-sampling
|
2014-07-27 21:47:25 -06:00 |
|
Gregory Nutt
|
ab26d97d74
|
PCM: Major simplification of the sub-sampling design. Now need no extra buffers because sub-sampling is done in place
|
2014-07-27 21:42:10 -06:00 |
|
Gregory Nutt
|
2efb594f50
|
PCM: remove partial sample buffer. Not needed
|
2014-07-27 21:00:19 -06:00 |
|
Gregory Nutt
|
c1b8e87918
|
Update ChangeLogs
|
2014-07-27 19:51:10 -06:00 |
|
Gregory Nutt
|
38c095bd17
|
NxPlayer needs to set curbyte field to zero before enqueuing a buffer. Otherwise, it looks like beginning of the buffer has already been consumed
|
2014-07-27 19:49:01 -06:00 |
|
Gregory Nutt
|
ca5200a7d0
|
Update ChangeLogs
|
2014-07-27 19:34:52 -06:00 |
|
Gregory Nutt
|
f235f95e52
|
Misc bugfixes while integrating fast forward by sub-sampling
|
2014-07-27 19:32:07 -06:00 |
|
Gregory Nutt
|
c9f15ffd3d
|
PCM: First cut at fast forward by subsampling
|
2014-07-27 18:33:17 -06:00 |
|
Gregory Nutt
|
0cc9b06eca
|
Add definitions to support fast forward and rewind configuration
|
2014-07-27 12:25:40 -06:00 |
|
Gregory Nutt
|
bb054b8f27
|
Update ChangeLogs
|
2014-07-27 11:07:06 -06:00 |
|
Gregory Nutt
|
123efe6e23
|
Move subsampling rate definitions from nxplayer.h to audio.h
|
2014-07-27 11:05:25 -06:00 |
|
Gregory Nutt
|
100bba42be
|
ARM: Move L2 cache initialization to much later in the sequence
|
2014-07-27 10:03:33 -06:00 |
|
Gregory Nutt
|
ad4fdc06e2
|
Update ChangeLog
|
2014-07-26 18:51:21 -06:00 |
|
Gregory Nutt
|
c523abdc62
|
ARMv7-A L2 Cache currently depends on EXPERIMENTAL because it does not yet work properly
|
2014-07-26 18:48:54 -06:00 |
|