sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,997 Commits 1 Branch 0 Tags 291 MiB
716efcc13e
Commit Graph

1882 Commits

Author SHA1 Message Date
Gregory Nutt
2c251d845c include/net/if.h: Add a bit to the device flags to indicate if the device packet buffer holds an IPv4 or an IPv6 domain packet. Set/clear the flag along with the correct offset to the application payload data as each packet is received. 
net/socket, net/tcp, net/udp:  Add logic to select the domain of the outputgoing packet before sending any UDP or TCP packet.  This sets the bit to indicate the IPv4 or IPv6 domain and the correct offset to the output going payload data.
 2015-01-17 07:42:09 -06:00
Gregory Nutt
88a0e82934 Networking: Remove field d_sndata from the device structure. It is the same as d_appdata and unnecessary 2015-01-17 05:59:13 -06:00
Gregory Nutt
8f8259a0d6 Networking: UDP and TCP MSS depends on the IP header size (as well as the link layer header size) and cannot be represented with a single value. 2015-01-16 15:03:10 -06:00
Gregory Nutt
2663538b0a Networking: Replace all references to the macros net_ipaddr_copy, net_ipaddr_hdrcopy, net_ipaddr_cmp, net_ipaddr_hdrcmp, and net_ipaddr_maskcmp with the appropriate IPv4 or IPv6 version of the macro (such as net_ipv4addr_copy). The goal is to support both IPv4 and IPv6 simultaneously. This requires that the macros be distinct and not conditionally defined to one on or the other. 2015-01-16 13:01:08 -06:00
Gregory Nutt
5e938941a6 Networking: Replace all references to net_ipaddr_t with either in_addr_t on net_ipv6addr_t. The goal is to support both IPv4 and IPv6 simultaneously. This requires that the two types be distinct and not conditionally typedef'ed to net_ipaddr_t. 2015-01-16 12:30:18 -06:00
Gregory Nutt
bee89be4f4 Networking: Drivers can have both IPv4 and IPv6 addesses, but a socket can only only one or the other; The socket connnection structures need to include a union of IPv4 and IPv6 addresses for the local address binding and for the remote address connections 2015-01-16 10:01:54 -06:00
Gregory Nutt
fe8b3c5220 Networking: More detangling of IPv6 logic. Next steps will be more invasive and will get moved to a branch 2015-01-16 08:51:18 -06:00
Gregory Nutt
5b45605991 Clean a few more IPv6 compilation issues; Add implementation of net_ipv6_maskcmp() 2015-01-15 15:55:52 -06:00
Gregory Nutt
630366272a Networking: Seperate tcp_input() and udp_input() into seprate functions tcp_ipv4_input(), tcp_ipv6_input(), udp_ipv4_input(), and upd_ipv6_input() than can deal will the data offsets caused by the differing sizes of the IP header. 2015-01-15 15:06:46 -06:00
Gregory Nutt
60e50ff3b5 Networking: More IPv6 detanglement 2015-01-15 13:08:28 -06:00
Gregory Nutt
5a441ce03b Networking: Misck IPv6 detanglement 2015-01-15 12:19:44 -06:00
Gregory Nutt
89538ac4a2 - Rename devif_input() ipv4_input() 
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
 2015-01-15 08:03:56 -06:00
Gregory Nutt
a49f0231d2 Networking: A few more IPv6-related fixes 2015-01-14 18:34:28 -06:00
Gregory Nutt
a7ce1279f9 Networking: (1) Copied all ICMP sources files to net/icmpv6 with proper renaming and removal of IPv4 logic, (2) remove IPv6 logic from files in net/icmp, (3) copied include/nuttx/icmp.h to icmpv6.h and removed IPv4 specific logic, (4) removed all IPv6 logic from icmp.h, (5) IP_HDRLEN became IPv4_HDRLEN and IPv6_HDRLEN, (6) ip_chksum() became ipv4_chksum() and ipv6_chksum(), and (7) added partial support for ICMPv6 statistics. 2015-01-14 16:10:38 -06:00
Gregory Nutt
7d68c22d7f Networking: Add support for IPv6 ioctls 2015-01-14 13:03:12 -06:00
Gregory Nutt
31a94816b2 USB host drivers: Change all parmeters named class to usbclass to avoid C++ conflicts 2015-01-11 08:05:09 -06:00
Gregory Nutt
089e001874 STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y 2015-01-08 18:12:06 -06:00
Gregory Nutt
1842525cc2 MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy. 
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.

This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.

From David Sidrane
 2015-01-08 06:23:42 -06:00
Gregory Nutt
2b522bab9e Update ChangeLog 2015-01-06 10:52:05 -06:00
Gregory Nutt
e9cec9057b There were some changes which broke my NuttX-Build. With these two patches it builds again. From Manuel Stühn 2015-01-01 15:56:25 -06:00
Gregory Nutt
cf651e0ce3 Fix warning caused by missing comment closing */. From David Sidrane. 2014-12-30 06:22:18 -06:00
Gregory Nutt
b4f235c33f Added forward reference to eliminate warnings. From David Sidrane. 2014-12-30 06:20:40 -06:00
Gregory Nutt
1bfec1a702 Fixes warning about block_operations not being defined. From David Sidrane. 2014-12-30 06:19:30 -06:00
Gregory Nutt
089578319a STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane 2014-12-27 18:58:18 -06:00
Gregory Nutt
aefde565d3 Serial Upper Half: Add watermarks to RX flow control logic 2014-12-27 07:43:06 -06:00
Gregory Nutt
6daa9468f6 More RAMTRON related fixes from David Sidrane 2014-12-26 08:15:59 -06:00
Gregory Nutt
996d6c9d55 Most superstitous updates to the RAMTROM driver make it more compatibile with the version used by PX4. From David Sidrane 2014-12-26 07:59:09 -06:00
Gregory Nutt
fa5dffbc18 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
7a874e5d4c ili9341: update interface control definitions 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:52:40 -06:00
Gregory Nutt
3ce3b168f8 stm32: Add interface description for ltdc controller. This defines the interface to perform hardware accelerated layer operation by the ltdc controller. 
The following methods must be supported by the implementation:

- gevideoinfo
- getplaneinfo
- getlid
- setclut
- getclut
- setcolor
- getcolor
- setcolorkey
- getcolorkey
- setalpha
- getalpha
- setblendmode
- getblendmode
- setarea
- getarea
- update

And if DMA2D is supported:

- blit
- blend

The method up_ltdcgetlayer provides access to a reference of a specific ltdc
layer.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:45:18 -06:00
Gregory Nutt
a1a2e53c3e Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis 2014-12-18 13:52:01 -06:00
Gregory Nutt
937f9f23f1 strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8. 2014-12-17 12:24:02 -06:00
Gregory Nutt
d818ab5e35 Update the ADXL345 interface following the current interface scheme 2014-12-16 11:45:28 -06:00
Gregory Nutt
c9ca51fc8a Minor clean-up associated with the ADX345 driver 2014-12-16 10:18:44 -06:00
Gregory Nutt
ae18f9dacd Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
10863af628 Add ADXL345 accelerometer driver. From Alan Carvalho de Assis 2014-12-16 08:16:53 -06:00
Gregory Nutt
16f5ea451b Fix cosmetic typo in header file idempotence. Note by Lazlo 2014-12-10 18:27:29 -06:00
Gregory Nutt
cb76fc05fc Lots of fonts that derive from X11-misc-fixed-* fonts. Converted for use by NuttX by Pierre-Noel Bouteville 2014-12-10 17:11:23 -06:00
Gregory Nutt
cdc8fc52d1 SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit 2014-12-09 14:11:15 -06:00
Gregory Nutt
69cb752813 Add CRC8 support. From Ken Pettit 2014-12-09 13:27:22 -06:00
Gregory Nutt
7f59a64f42 stdint.h: Don't use hex values to specify minimum values of fixed width, signed values. Hex values are inherently unsigned and not usable for this purpose in all contexts 2014-12-08 11:44:52 -06:00
Gregory Nutt
1b5e296489 Add sys/custom_file.h. Used when CUSTOM_FILE_IO is define and avoids re-definition errors about the FILE define. From Thomas Gruber via the PX4 repository 2014-12-06 12:10:08 -06:00
Gregory Nutt
ad05793c0f msg type should be char * not void * in mq_send, mq_timedsend, mq_receive, and mq_timedreceive. Noted by Pierre-Noel Bouteville 2014-12-05 19:16:14 -06:00
Gregory Nutt
c0c108d5e2 Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet 2014-12-05 09:13:34 -06:00
Gregory Nutt
76906110b0 Correct spelling: MOUNTPOINT not MOUNTPOUNT. Numerous places. Some are problems. From Woohan Lee 2014-12-01 06:41:30 -06:00
Gregory Nutt
7ad7163bd3 Updated comments 2014-11-29 17:39:40 -06:00
Gregory Nutt
1fa790cf8e Update comments 2014-11-29 15:28:28 -06:00
Gregory Nutt
ba58b37e46 Re-arrange the AJOYSTICK data structure so that it matches the mouse structure 2014-11-29 13:26:26 -06:00
Gregory Nutt
4657f5c870 Update some Documentation and comments associated with the last ioctl change 2014-11-29 13:25:29 -06:00
Gregory Nutt
e31d5125ae Add support for a variadic ioctl() function. The ioctl() interface is a non-standard, Unix interface. NuttX has always used the older, three-parameter version. Most contemporary systems now, however, use a variadic form of the ioctl() function. Added an option to insert a shim layer to adapt the three-parameter ioctl() to use the variadic interface form. Internally, the ioctl handling is the same three-parameter logic. The only real complexity to the shim is in how the system calls must be handled. 2014-11-29 10:53:22 -06:00