Commit Graph

4885 Commits

Author SHA1 Message Date
Gregory Nutt
102554adfe OHCI HCDs will not support cancellation of syncrhonous transfers 2015-05-11 10:36:17 -06:00
Gregory Nutt
0536435ff8 Correct an error recently introduced in the STM32 and EFM32 USB host controller drivers.
The test for data partially transferred is incorrectec: chan->xfrd != xfrlen
Should be chan->xfrd > 0

From Ronly XLN.
2015-05-11 09:04:25 -06:00
Gregory Nutt
32a4131f92 Fix a cut'n'paste error in the last commit 2015-05-10 10:23:23 -06:00
Gregory Nutt
9e07b2deb1 OHCI: Fix length calculation in all OHCI drivers: CBP==0 means that the entire buffer was transferred, not that a null packet was tranaferred 2015-05-10 10:01:22 -06:00
Gregory Nutt
6e5a4e8b5e Add EXTI line definitions for the STM32L family. 2015-05-09 09:03:14 -06:00
Gregory Nutt
4250bb5138 STM32 F3: Add DBGMCU register definitions for the F3 family. From Greg Meiste. 2015-05-09 06:05:17 -06:00
Gregory Nutt
aaaa8f2e9d Adds support for STM32F302K8 and STM32F302K6. From Ben Dyer via PX4/David Sidrane. 2015-05-08 14:10:55 -06:00
Gregory Nutt
780c81f130 USB host CDC/ACM fixes. Still kind of buggy 2015-05-08 10:58:41 -06:00
Gregory Nutt
b8483aea40 In go_os_start that sets the IDLE thread stack coloration, mov does not set condition codes which are tested by the following beq. Need to use movs instead. Noted by David Sidrane 2015-05-07 20:36:08 -06:00
Gregory Nutt
2325f2c529 kl: enable the clocks to UART1 and UART2. The previous version would cause a hard fault on startup due to the modules not being clocked. Also drop the GPIO configuration as it's done during kl_start(). From Michael Hope. 2015-05-07 17:17:54 -06:00
Gregory Nutt
292cb9fe2f kl: fix PWM debugging. TPM1 and TPM2 have two channels instead of six and will hard fault if you try to read the missing channels. From Michael Hope. 2015-05-07 17:17:53 -06:00
Gregory Nutt
d1da52a018 Misc improvements to the CDC/ACM host driver, mostly related to parsing the configuration descriptor. Still does not work. 2015-05-07 10:02:51 -06:00
Gregory Nutt
8062555384 Add support for the KL25Z64. The KL25Z64 is a lower memory variant of the KL25Z128 and is used on the Teensy LC. From Michael as SourceForge patch 50. 2015-05-07 06:47:17 -06:00
Gregory Nutt
afafe84050 LPC17 USB host: Fix some compile errors when bulk endpoints + USB debug enabled. Refresh a configuration 2015-05-06 16:15:12 -06:00
Gregory Nutt
5f113517f6 Fix a few typos in comments 2015-05-06 15:26:07 -06:00
Gregory Nutt
a813d9438c SAMA5 OHCI: Remove a DEBUGASSERT that was firing if a a spurious interrupt was received 2015-05-06 07:44:37 -06:00
Gregory Nutt
14837ed20e Fix some bugs introduced with the last set of big commits 2015-05-05 14:59:29 -06:00
Gregory Nutt
8f959373e1 USB host: Modify the transfer() and asynch() methods so that the actual size of the transfer is returned. Unverified on initial commit. 2015-05-05 13:14:22 -06:00
Gregory Nutt
93b251b372 Cosmetic changes 2015-05-05 06:42:58 -06:00
Gregory Nutt
12bf2aa3be Correct description of some input parameters. Suggested by Pelle Windestam 2015-05-05 06:26:59 -06:00
Gregory Nutt
5381479cbb SAMA5D OHCI: Remove a local variable that is unused when debug is disabled; refresh a configuration. Update a README 2015-05-04 07:34:29 -06:00
Gregory Nutt
eac8bcf910 Olimex LPC1766STK: The USB host waiter stack should be configurable because it needs to be a lot depending when using a hub 2015-05-03 16:14:08 -06:00
Gregory Nutt
ef2ef35600 EHCI: Fix backward arguments to memalign in previous alignment fix; extend fix to OHCI too 2015-05-03 14:31:16 -06:00
Gregory Nutt
ca8fd8c964 LPC31 and SAMA5Dx EHCI drivers: Fix cache related problem. All buffers are now aligned with the cache line size in both starting address and in length. This cause major problems in unlucky builds where the USB host buffers where unaligned and abbutting other data. The cache flush and invalidate operations could be subverted by acceses to adjacent data or could have unexpected side effects. This bug has been in the ECHI drivers forever, but was only revealed due to unlucky memory allocations during the integration of the hub feature. 2015-05-03 13:20:15 -06:00
Gregory Nutt
1828d14c08 Fix trivial typo 2015-05-03 10:48:42 -06:00
Gregory Nutt
5577b55cf5 SAMA5 EHCI: Mostly cosmetic 2015-05-03 08:51:44 -06:00
Gregory Nutt
00fd848209 SAMA5 EHCI: Fix some compile issues when hub support is enabled 2015-05-02 14:00:12 -06:00
Gregory Nutt
d824979cec Merge remote-tracking branch 'origin/master' into usbhub 2015-05-02 11:39:08 -06:00
Gregory Nutt
80d4c7c21a USB host: If the implementation of the disconnect method frees the EP0 endpoint, then it must nullify it in the port structure 2015-05-02 11:38:27 -06:00
Gregory Nutt
b3d12c6026 STM32 USB device. Add protection in the event that out-of-bound enpoint numbers are received. From David Sidrane. 2015-05-02 10:58:27 -06:00
Gregory Nutt
823af4b409 USB host: Need to include the port structure when disconnecting, otherwise may destroy a root hub port 2015-05-02 10:44:18 -06:00
Gregory Nutt
6481f1f68e ARMv7-A: Port some assertion debug logic from ARMv7-M 2015-05-02 09:53:57 -06:00
Gregory Nutt
8ebb694516 SAMA5 OHCI: Implement asynchronous I/O needed for hub support 2015-05-02 09:38:08 -06:00
Gregory Nutt
862e52aa42 LPC17 GPIO: Reorder steps when an output GPIO is configured in order to avoid transient bad values from being output. From Hal Glenn. 2015-05-02 06:30:19 -06:00
Gregory Nutt
5a2ed0f6c1 Merge remote-tracking branch 'origin/master' into usbhub 2015-05-01 15:38:48 -06:00
Gregory Nutt
232a01b91c SAMA5D USB hub: Fix some trace statements; update some README files 2015-05-01 15:38:03 -06:00
Gregory Nutt
e8f89f127b SAM PIO: sam_pio.h needs to include chip/sam_memorymap.h in order to resolve some conditional logic properly 2015-05-01 13:41:28 -06:00
Gregory Nutt
48f368f96f SAMA5 OHCI: Improve some trace-related naming 2015-05-01 13:40:54 -06:00
Gregory Nutt
4055b08ded Add USB host trace output to show EP0 configuration 2015-05-01 13:02:20 -06:00
Gregory Nutt
b328c51037 SAMA5 OHCI: Clean up some debug output 2015-05-01 10:50:01 -06:00
Gregory Nutt
ce9c91c562 SAMA5D OHCI: Add some missing logic required for USB hub support 2015-05-01 10:13:23 -06:00
Gregory Nutt
e76b7d99fa Added missing EXTI definitions for the STM32 F3; Correct an error the port D base address in the STM32 F3 and F37 memory maps. From Greg Meiste. 2015-05-01 07:31:56 -06:00
Gregory Nutt
149d8c039d EFM32 USB host: Add missing trace data and some missing connection-related logic; update a configuration 2015-04-30 13:46:53 -06:00
Gregory Nutt
501d82928d STM32/EFM32 USB host: Implemented asynchronous cancel method 2015-04-30 11:24:18 -06:00
Gregory Nutt
c096b7d426 USB Hub: Fix compile problems when hub debug enabled 2015-04-30 08:12:55 -06:00
Gregory Nutt
a4455d07c1 STM32 HUB: Fix more compilation errors when hub support is enabled 2015-04-30 08:00:41 -06:00
Gregory Nutt
2f7682f7df Fix some errors in initial re-verification of USB host on the STM32F4-Discovery 2015-04-30 07:28:30 -06:00
Gregory Nutt
d4feb7205f First cut, dirty conversion of EFM32, STM32 FS and HS host drivers to the new interfaces 2015-04-29 15:53:58 -06:00
Gregory Nutt
6d66546c31 USB HUB: Fix a deadlock that can occur if the HCD and the HUB try to share the high priority work queue. Now how work must be done on the low priority work queue. 2015-04-29 08:32:17 -06:00
Gregory Nutt
60243e508e Merge remote-tracking branch 'origin/master' into usbhub 2015-04-28 12:22:20 -06:00