Jan Pobrislo
|
7999822189
|
I've found that the interrupts aren't enabled since nothing updates them after btn_poll() marks the file descriptor structure as being polling. I've managed to make it work with this change.
|
2017-07-04 14:43:19 -06:00 |
|
Gregory Nutt
|
f07420dedf
|
SAME70-Xplained: Add MRF24J40 support.
|
2017-07-04 14:31:26 -06:00 |
|
Gregory Nutt
|
5e617f8410
|
UDP networking: The TTL (time to live) was not being set in the IPv4 or IPv6 header unless the UDP socket was bound.
|
2017-07-04 12:05:21 -06:00 |
|
Gregory Nutt
|
c0c275c8fc
|
IP forwarding. Adds a little more structure to handle passing packets received on one network device to another network device. Logic is still incomplete.
|
2017-07-04 10:19:52 -06:00 |
|
Gregory Nutt
|
59cb2a280b
|
Merge remote-tracking branch 'origin/master' into ipforward
|
2017-07-04 07:21:50 -06:00 |
|
Gregory Nutt
|
32a96bda6d
|
IPv6 forwarding logic must decrement the TTL and drop the packet if the hop limit is exceeded.
|
2017-07-04 07:05:42 -06:00 |
|
Gregory Nutt
|
eba16af7ba
|
Adds a little more IP foward framework
|
2017-07-03 16:22:57 -06:00 |
|
Gregory Nutt
|
856d7e73b7
|
Some compile time fixes
|
2017-07-03 16:22:25 -06:00 |
|
Gregory Nutt
|
eafcf4d059
|
Clean up some conditional logic
|
2017-07-03 16:02:59 -06:00 |
|
Gregory Nutt
|
83a875f394
|
IP forwarding: Add some fragments of TCP forwarding logic.
|
2017-07-03 15:58:01 -06:00 |
|
Gregory Nutt
|
81cd76484f
|
Add some partial IP forwarding logic.
|
2017-07-03 15:34:28 -06:00 |
|
Gregory Nutt
|
5060a7cdf2
|
samv71-xult/mrf24j40: Add reset logic (but comment out because it is not necessary)
|
2017-07-03 13:00:30 -06:00 |
|
Gregory Nutt
|
72c4f12286
|
samv71-xult/mrf24j40-starhub: Reset pins backward; update README.
|
2017-07-03 12:37:37 -06:00 |
|
Gregory Nutt
|
445af2e5a0
|
samv71-xult/mrf24j40-starhub: Should have pull-ups on interrupting inputs.
|
2017-07-03 12:06:17 -06:00 |
|
Gregory Nutt
|
3b697327cc
|
samv71-xult/mrf24j40-starhub: Fix MRF24J40 interrupt pin.
|
2017-07-03 11:51:39 -06:00 |
|
Eetu Nevalainen
|
21dcc8cbc7
|
stm32f40xxx_rtcc ISR register and write protection fix
|
2017-07-03 11:06:07 -06:00 |
|
Gregory Nutt
|
68315b7444
|
Merged clang into master
|
2017-07-03 07:04:57 -06:00 |
|
Gregory Nutt
|
e76c9875a4
|
Make.defs edited online with Bitbucket
|
2017-07-03 13:04:38 +00:00 |
|
Gregory Nutt
|
057b438499
|
samv71-xult/mrf24j40-starhub: Disabled CONFIG_BOARD_INITIALIZE; Correct MRF24J40 interrupt edge.
|
2017-07-03 06:56:47 -06:00 |
|
Gregory Nutt
|
acb0dcecac
|
samv71-xult: Fix a typo in MRF24J40 initialization.
|
2017-07-02 18:36:55 -06:00 |
|
Gregory Nutt
|
56801c3389
|
samv71-xult: Fix SP0 vs. TWHS0 in mrf24j40-starhub/defconfig; fix copy-paste errors in SPI initialization logic.
|
2017-07-02 18:33:31 -06:00 |
|
Jan Pobrislo
|
a8f43e1216
|
stm32f4 discovery: Add logic to register the button driver and the user led driver if so configured
|
2017-07-02 16:40:11 -06:00 |
|
Gregory Nutt
|
41d4958a77
|
Add missing MRF24J40 bring-up logic
|
2017-07-02 15:01:11 -06:00 |
|
Gregory Nutt
|
634b13c143
|
samv71-xult/mrf24j40-starhub: Tweaks to defconfig
|
2017-07-02 14:25:51 -06:00 |
|
Gregory Nutt
|
7d7fd9112d
|
samv71-xult/mrf24j40-starhub: Put the serial console on UART3, i.e., on a Arduino serial shield.
|
2017-07-02 13:06:23 -06:00 |
|
Gregory Nutt
|
5cb3edb552
|
Update some naming used in Documentation
|
2017-07-02 11:27:27 -06:00 |
|
Gregory Nutt
|
09ab651e02
|
samv71-xult: Add support for the MRF24J40 radio and create a mrf24j40-starhub configuration. A few fixes to IPv6 and 6LoWPAN were required to have 6LoWPAN and Ethernet coexisting. Untested and expect some complexity in the bring-up.
|
2017-07-02 11:04:57 -06:00 |
|
Gregory Nutt
|
8fa5e9772b
|
Clang: Should there not be a prefix when using a cross compiler where clang refers to the host clang.
|
2017-07-02 06:51:21 -06:00 |
|
Gregory Nutt
|
cf44fd6ec0
|
Add CLANG definitions in Kconfig and Toolchain.defs
|
2017-07-02 06:42:48 -06:00 |
|
Goran Mekić
|
44bd7d3b7f
|
Initial clang compile
|
2017-07-02 06:24:26 -06:00 |
|
Gregory Nutt
|
0b4a9a0b3d
|
same570-xplained: Refresh configurations.
|
2017-07-01 17:24:40 -06:00 |
|
Gregory Nutt
|
d280f8854e
|
include/nuttx/net and net/: Move private prototype of netdev_foreach() from the public include/nuttx/net/net.h to the private net/netdev/ndetdev.h header file where it belongs.
|
2017-07-01 08:39:39 -06:00 |
|
Gregory Nutt
|
ae1771454a
|
6LoWPAN: TCP send logic was returning a failure in one case when, in fact, the send was successful.
|
2017-06-30 16:07:51 -06:00 |
|
Gregory Nutt
|
7de86f1ab4
|
This change backs out the 'misconception' fix of 76e6dba2e4 and reimplements it in a way that actually seems to work.
|
2017-06-30 12:39:00 -06:00 |
|
Gregory Nutt
|
e19c52ed6e
|
6LoWPAN fix compile issue in star hub configuration.
|
2017-06-30 10:13:31 -06:00 |
|
Gregory Nutt
|
76e6dba2e4
|
6LoWPAN: Fix a misconception about HC06 16-bit IPv6 address compression.
|
2017-06-30 10:08:44 -06:00 |
|
Gregory Nutt
|
af8c5c86f3
|
6LowPan: Change how the destination node address is handled in the start endpoint configuration. When the star endpoint sent the IPv6 destination address, the HC06 compression logic elided the address -- meaning that it could be reconstructed by the recipient based on the receiver's assigned short address. However, when intercepted by the hub, the uncompressed address does not know the short address of the recipient and instead uses the short address of the hub. This means two things: (1) it looks like the hub address is the destination address, and (2) the uncompressed UDP packet has a bad checksum. This change assures that the destination IPv6 address is not elided in the case of the star endpoint configuration.
|
2017-06-30 09:32:17 -06:00 |
|
Gregory Nutt
|
ad3ea72ff5
|
Update a README; refresh some configurations.
|
2017-06-29 10:55:01 -06:00 |
|
Gregory Nutt
|
6d8df90b79
|
Clicker2-STM32 + net/: Add configurations to support the endpoint and hub roles in a star topology. Fix various things that broke when IPv6 forwarding was enabled.
|
2017-06-29 08:16:46 -06:00 |
|
Gregory Nutt
|
a93f130002
|
6LoWPAN: Add configurable support for 6LoWPAN star topology. With this change, the endpoints which are the 'points' of the star will forward all traffic to the coordinator. The coordinator is assumed to be the 'hub' of the star. This function also implements IPv6 forwarding. That forwarding implementation is minimal, just enough to support the forwarding requirements of the star hub node.
|
2017-06-28 15:39:21 -06:00 |
|
Gregory Nutt
|
ca97725e55
|
net: Remove a semicolon that cause compile failure in certain configurations
|
2017-06-28 15:16:15 -06:00 |
|
Gregory Nutt
|
036bb345a1
|
net:/ Fix a backward logic in a conditional tested added yesterday.
|
2017-06-28 14:12:17 -06:00 |
|
Gregory Nutt
|
c3b14f98ea
|
tools/: Remove dangling space at the end of lines.
|
2017-06-28 13:56:46 -06:00 |
|
Gregory Nutt
|
031fbfc6bc
|
sched/: Remove dangling space at the end of lines.
|
2017-06-28 13:33:04 -06:00 |
|
Gregory Nutt
|
f87d5a3f81
|
net/: Remove dangling space at the end of lines.
|
2017-06-28 13:32:19 -06:00 |
|
Gregory Nutt
|
98d937104e
|
mm/: Remove dangling space at the end of lines.
|
2017-06-28 13:31:21 -06:00 |
|
Gregory Nutt
|
28e9fe32b6
|
include/: Remove dangling space at the end of lines.
|
2017-06-28 13:30:08 -06:00 |
|
Gregory Nutt
|
a0956c9e5b
|
graphics/: Remove dangling space at the end of lines.
|
2017-06-28 13:28:52 -06:00 |
|
Gregory Nutt
|
a469f0ef04
|
Documentation/: Remove dangling space at the end of lines.
|
2017-06-28 13:27:10 -06:00 |
|
Gregory Nutt
|
c67b807f43
|
configs/: Remove dangling spaces at the end of lines in *.c and *.h files.
|
2017-06-28 13:21:20 -06:00 |
|