Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
1. add support to join main task
| static pthread_t self;
|
| static void *join_task(void *arg)
| {
| int ret;
| ret = pthread_join(self, NULL); <--- /* Fix Task could not be joined */
| return NULL;
| }
|
| int main(int argc, char *argv[])
| {
| pthread_t thread;
|
| self = pthread_self();
|
| pthread_create(&thread, NULL, join_task, NULL);
| sleep(1);
|
| pthread_exit(NULL);
| return 0;
| }
2. Detach active thread will not alloc for additional join, just update the task flag.
3. Remove the return value waiting lock logic (data_sem),
the return value will be stored in the waiting tcb.
4. Revise the return value of pthread_join(), consistent with linux
e.g:
Joining a detached and canceled thread should return EINVAL, not ESRCH
https://pubs.opengroup.org/onlinepubs/009695399/functions/pthread_join.html
[EINVAL]
The value specified by thread does not refer to a joinable thread.
NOTE:
This PR will not increase stack usage, but struct tcb_s will increase 32 bytes.
Signed-off-by: chao an <anchao@lixiang.com>
move task group into task_tcb_s to avoid access allocator to improve performance
for Task Termination, the time consumption will be reduced ~2us (Tricore TC397 300MHZ):
15.97(us) -> 13.55(us)
Signed-off-by: chao an <anchao@lixiang.com>
The task files should consult the "spawn action" and "O_CLOEXEC flags"
to determine further whether the file should be duplicated.
This PR will further optimize file list duplicating to avoid the performance
regression caused by additional file operations.
Signed-off-by: chao an <anchao@xiaomi.com>
Instead of using a volatile storage for the address environment in the
binfmt / loadinfo structures, always allocate the address environment
from kheap.
This serves two purposes:
- If the task creation fails, any kernel thread that depends on the
address environment created during task creation will not lose their
mappings (because they hold a reference to it)
- The current address environment variable (g_addrenv) will NEVER contain
a stale / incorrect value
- Releasing the address environment is simplified as any pointer given
to addrenv_drop() can be assumed to be heap memory
- Makes the kludge function addrenv_clear_current irrelevant, as the
system will NEVER have invalid mappings any more
Detach the address environment handling from the group structure to the
tcb. This is preparation to fix rare cases where the system (MMU) is left
without a valid page directory, e.g. when a process exits.
If address environments are in use, it is not possible to simply
memcpy from from one process to another. The current implementation
of env_dup does precisely this and thus, it fails at once when it is
attempted between two user processes.
The solution is to use the kernel's heap as an intermediate buffer.
This is a simple, effective and common way to do a fork().
Obviously this is not needed for kernel processes.
since the standard require the caller pass the name explicitly
https://pubs.opengroup.org/onlinepubs/009695399/functions/posix_spawn.html:
The argument argv is an array of character pointers to null-terminated strings.
The last member of this array shall be a null pointer and is not counted in argc.
These strings constitute the argument list available to the new process image.
The value in argv[0] should point to a filename that is associated with the
process image being started by the posix_spawn() or posix_spawnp() function.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Id79ffcc501ae9552dc4e908418ff555f498be7f1
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that getopt() test in ostest wailed with
esp32-devkitc:smp and spresense:smp
- Finally, I found that the task-specific data is not
initialized.
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with ostest esp32-devkitc:smp and spresense:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
getopt() in the FLAT build environment is not thread safe. This is because global variables that are process-specific in Unix are truly global in the FLAT build. Moving the getopt() variables into TLS resolves this issue.
No side-effects are expected other than to getopt()
Tested with sim:nsh
to ensure the basic info(e.g. pid) setup correctly before call arch API
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I851cb0fdf22f45844938dafc5981b3f576100dba
Since up_release_stack auto detect whether the memory come from builtin heap
if (ttype == TCB_FLAG_TTYPE_KERNEL)
{
if (kmm_heapmember(dtcb->stack_alloc_ptr))
{
kmm_free(dtcb->stack_alloc_ptr);
}
}
else
{
/* Use the user-space allocator if this is a task or pthread */
if (umm_heapmember(dtcb->stack_alloc_ptr))
{
kumm_free(dtcb->stack_alloc_ptr);
}
}
This reverts commit 124e6ee53d.
change the stack pointer type from (uint32_t *) to (void *)
Change-Id: I90bb7d6a9cb0184c133578a1a2ae9a19c233ad30
Signed-off-by: chao.an <anchao@xiaomi.com>
Block and MTD drivers may be opened and managed as though they were character drivers. But this is really sleight of hand; there is a hidden character driver proxy that mediates the interface to the block and MTD drivers in this case.
fstat(), however, did not account for this. It would report the characteristics of the proxy character driver, not of the underlying block or MTD driver.
This change corrects that. fstat now checks if the character driver is such a proxy and, if so, reports the characteristics of the underlying block or MTD driver, not the proxy character driver.
sched_releasetcb() will normally free the stack allocated for a task. However, a task with a custom, user-managed stack may be created using nxtask_init() followed by nxtask_activer. If such a custom stack is used then it must not be free in this many or a crash will most likely result.
This chagne addes a flag call TCB_FLAG_CUSTOM_STACK that may be passed in the the pre-allocted TCB to nxtask_init(). This flag is not used internally anywhere in the OS except that if set, it will prevent sched_releasetcb() from freeing that custom stack.
Add trivial function nxtask_uninit(). This function will undo all operations on a TCB performed by task_init() and release the TCB by calling kmm_free(). This is intended primarily to support error recovery operations after a successful call to task_init() such was when a subsequent call to task_activate fails.
That error recovery is trivial but not obvious. This helper function should eliminate confusion about what to do to recover after calling nxtask_init()
-Move task_init() and task_activate() prototypes from include/sched.h to include/nuttx/sched.h. These are internal OS functions and should not be exposed to the user.
-Remove references to task_init() and task_activate() from the User Manual.
-Rename task_init() to nxtask_init() since since it is an OS internal function
-Rename task_activate() to nxtask_activate since it is an OS internal function
All complaints fixed except for those that were not possible to fix:
- Used of Mixed case identifier in ESP32 files. These are references to Expressif ROM functions which are outside of the scope of NuttX.
Move the prototype for the internal OS from from sched/sched/sched.h to include/nuttx/sched.h. This was done because binfmt/binfmt/excecmodule.c requires the prototype for sched_releasetcb() and was illegally including sched/sched/sched.h. That is a blatant violation of the OS modular design and the person that did this should be hung up by their thumbs. Oh... I did that back in a bad moment in 2014. Now that is made right.
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
Squashed commit of the following:
configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3.
fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS.
syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0
binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3
configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
Squashed commit of the following:
Trivial, cosmetic
sched/, arch/, and include: Rename task_vforkstart() as nxtask_vforkstart()
sched/, arch/, and include: Rename task_vforkabort() as nxtask_vforkabort()
sched/, arch/, and include: Rename task_vforksetup() as nxtask_vfork_setup()
sched/: Rename notify_cancellation() as nxnotify_cancellation()
sched/: Rename task_recover() to nxtask_recover()
sched/task, sched/pthread/, Documentation/: Rename task_argsetup() and task_terminate() to nxtask_argsetup() and nxtask_terminate(), respectively.
sched/task: Rename task_schedsetup() to nxtask_schedsetup()
sched/ (plus some binfmt/, include/, and arch/): Rename task_start() and task_starthook() to nxtask_start() and nxtask_starthook().
arch/ and sched/: Rename task_exit() and task_exithook() to nxtask_exit() and nxtask_exithook(), respectively.
sched/task: Rename all internal, static, functions to begin with the nx prefix.
