sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
26,399 Commits 1 Branch 0 Tags 291 MiB
95555a0199
Commit Graph

1903 Commits

Author SHA1 Message Date
Gregory Nutt
95555a0199 PTY: Add ioctls to support locking and unlocking of the slave. LIBC: Add implementation of unlockpt() 2016-07-15 09:39:33 -06:00
Gregory Nutt
6139860c0b PTY: Added PTY IOCTL command definitions. Add support for TIOCGPTN. LIB: Implement ptsname() and ptsname_r() 2016-07-15 08:33:47 -06:00
Gregory Nutt
bcbe9806d2 In SUSv1 model, need to tried the PTY driver pair as unlinked if the master closes its reference 2016-07-15 07:33:48 -06:00
Gregory Nutt
14c216107a PTY: Need to free PTMX minor number is slave is unlinked 2016-07-15 07:22:36 -06:00
Gregory Nutt
e50646336b Add PTY header files 2016-07-15 07:19:42 -06:00
Gregory Nutt
7fa5093fff PTYs prototypes hooked into build and configuration system (as EXPERIMENTAL) 2016-07-15 06:48:10 -06:00
Gregory Nutt
ccf4bfafcb Prototype versions of ptmx/pty suppoprt. Still under developement; not yet hooked into build or configuration system. 2016-07-14 20:20:48 -06:00
Ken Pettit
fea2aaba05 SMART MTD layer: Fixes freesector logic error when sectorsPerBlk=256, adds DEBUGASSERT for invalid geometry and additional memory debug logic. Also fixes the dangling pointer on error bug. 2016-07-14 10:31:28 -06:00
Gregory Nutt
6fda036615 Eliminate a warning 2016-07-13 14:09:51 -06:00
Gregory Nutt
74037a7951 Merged in ziggurat29/nuttx/stm32l4_smartfs_test (pull request #97) 
fixes to n25qxxx mtd driver for smartfs support, etc...
 2016-07-12 12:16:13 -06:00
ziggurat29
74777499bc alter the notion of 'blocksize' to be equivalent to 'flash write page size' in order to align with assumptions in the smartfs driver (at least, maybe other things do as well). 
Correct a bug that was previously masked by having blocksize=eraseblocksize which would cause buffer overflows and delicious hardfaults.
Trivial spelling changes in comments, etc.
 2016-07-12 11:46:08 -05:00
Sebastien Lorquet
0d41a1cd42 Before accessing the sst26 flash, the "Global Unlock" command must me executed, which I do in the sst26 driver. 
BUT. re-reading the datasheet, the WREN instruction is required to enable the execution of this command. This was not done.

I have no idea how the driver currently works except by chance. The writes
should never happen at all, the flash is half-enabled!
 2016-07-12 10:34:03 -06:00
Heath Petersen
dc72e16625 handle when CONFIG_SERIAL_UART_ARCH_IOCTL is not enabled 2016-07-12 06:50:58 +00:00
Frank Benkert
5d3cdff16b drivers/pipes/Kconfig: Add missing configuration for pipe ring buffer size. 2016-07-08 06:32:58 -06:00
ziggurat29
2cadf783fd cdcacm_unbind leaks write request objects. This arises due to freeing the 
bulk IN endpoint before the loop that frees the requests via cdcasm_freereq.
That function checks the parameters and skips the freeing if either is NULL.
Freeing the bulk IN enpoint will cause the first param to be NULL, thereby
bypassing the free operation.  To fix, I moved the release of the bulk IN
endpoint until after to loop (much as was the case for the OUT and read
requests, which did not exhibit the problem).
 2016-07-07 12:02:23 -05:00
Paul A. Patience
0690391d42 ioexpander/gpio: Add missing argument to gpin_read and gpout_read 2016-07-05 15:55:16 -04:00
Gregory Nutt
02b91d9880 Add a SYSLOG character device that can be used to re-direct output to the SYSLOG 2016-07-05 12:58:18 -06:00
Gregory Nutt
a39ce80add SYSLOG logic should use existing file interfaces, not re-invent them. 2016-07-05 12:12:44 -06:00
Gregory Nutt
3b825b3e00 Improve a debug assertion 2016-07-05 09:50:54 -06:00
Gregory Nutt
5b6fafb3f5 Several MTD FLASH drivers nullify the freed 'priv' structure and failed to return NULL as stated in the comments. Result, will operate on a NULL pointer later. Noted by David Sidrane. 2016-06-30 17:49:53 -06:00
Gregory Nutt
a897fd4ccf Eliminate use of apps/system/usbmonitor. Use drivers/usbmonitor instead. 2016-06-30 13:09:22 -06:00
Gregory Nutt
7c34a77b54 Move apps/system/usbmonitor to nuttx/drivers/usbmonitor 2016-06-30 12:24:33 -06:00
Gregory Nutt
cbb36416ab Need to use back- not forward-slash in character constant 2016-06-27 09:52:50 -06:00
Michael Spahlinger
3d5e690977 Shadow-Mode: The output- and configuration registers of the IO-Expander 
are held in the microcontrollers memory and only written to the IO-Expander.
 This reduces bus traffic and is more error-proof than the normal read-
 modify-write operation.

 Retry Mode: If enabled and an error occurs while writing to the IO-Expander the
 current transmission is automatically repeated once.
 2016-06-27 08:11:54 -06:00
Gregory Nutt
b16fdaf155 Some small improvements to GPIO driver 2016-06-26 11:24:35 -06:00
Gregory Nutt
db50f13511 Correct some typos in DEBUGASSERT statements 2016-06-24 14:34:21 -06:00
Gregory Nutt
20708c7c5e GPIO driver: Fix inconsistency in naming; beef up a debug assertion. 2016-06-24 11:32:24 -06:00
Gregory Nutt
ae19ca45e0 drivrs/ioexpander: Add support for a very simple GPIO drivers. It supports only pre-conrigured input and output pins and only basic input and output operations. 2016-06-24 09:43:49 -06:00
Wolfgang Reissnegger
d27ebee070 [sam34][timer] Fix ops check in TCIOC_STOP. 2016-06-23 17:12:24 -07:00
Gregory Nutt
acf3b14fe2 Trivial typo fix in README and document 2016-06-22 16:17:57 -06:00
Gregory Nutt
31b8e52267 Update README and documentatino 2016-06-22 14:47:40 -06:00
Gregory Nutt
0cb137d021 SYSLOG device flush logic not meaningful if SYSLOG file channels not supported 2016-06-22 13:35:53 -06:00
Gregory Nutt
1774ff2ed9 Add SYSLOG documentation to the porting guide 2016-06-22 12:26:54 -06:00
Gregory Nutt
b3acebd292 Update/replace drivers/syslog/README.txt 2016-06-22 10:47:27 -06:00
Gregory Nutt
9c87749afc SYSLOG device channel: Pre-pending CR to LF is now a configuration option 2016-06-22 10:08:20 -06:00
Gregory Nutt
91b82dcae3 SYSLOG character device channel will now expand LF to CR-LF 2016-06-22 08:36:50 -06:00
Gregory Nutt
82c890db23 syslog_dev_flush() needs to check if the inode is a mountpoint before calling the flush() method. Noted by David Sidrane. 2016-06-22 05:58:33 -06:00
Gregory Nutt
35cb2fb87d Eliminate a warning 2016-06-21 16:59:46 -06:00
Gregory Nutt
cb55c06153 sched_file_channel(): Comments say that we need to lock the scheduler, but we do not. 2016-06-21 16:39:28 -06:00
Gregory Nutt
8a9bd9af9d SYSLOG: Some rather complex conditional compilation missed a case. 2016-06-21 15:08:09 -06:00
Gregory Nutt
0e1e3bc404 Add a file that I forgot in the last commit; Also update some comments. 2016-06-21 13:33:17 -06:00
Gregory Nutt
e6a1d53869 Extend SYSLOG logic so that we can send SYSLOG output to a file. Not verified on initial commit. 2016-06-21 12:54:47 -06:00
Paul A. Patience
2f76f6e848 can: Add support for poll 2016-06-21 13:02:46 -04:00
David Sidrane
205a4b8498 Missing EXTERN on global variable declaration 2016-06-21 10:09:09 -06:00
Gregory Nutt
8f0c2cdd13 SYSLOG: Change configuration selections to assure that one and only one SYSLOG device can be selected. Also add a check to assure that it is appropriate to use up_putc as the low-level syslog device. Adds CONFIG_SYSLOG_CONSOLE and CONFIG_SYSLOG_SERIAL_CONSOLE. 2016-06-21 09:59:09 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
485aa6b231 SIM: Comment out skip scheduler debug output that can hang the simulation. 2016-06-21 08:59:01 -06:00
Gregory Nutt
c5ac473bc0 SYSLOG: Remove an obsolete, unused configuration item from Kconfig file 2016-06-21 07:58:42 -06:00
Gregory Nutt
62d8f839c7 SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup 2016-06-21 07:52:24 -06:00
Gregory Nutt
5385266756 SYSLOG: Fix a compile problem with assertions enabled. 2016-06-21 07:24:14 -06:00