Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
We can see them in ifconfig:
ap> ifconfig
wlan0 Link encap:Ethernet HWaddr 42:64:7f:b3:12:03 at UP mtu 1500
inet addr:10.0.1.2 DRaddr:10.0.1.1 Mask:255.255.255.0
inet6 DRaddr: ::
RX: Received Fragment Errors Bytes
00000b9b 00000000 00000000 21daf5
IPv4 IPv6 ARP Dropped
00000a33 00000137 00000031 00000000
TX: Queued Sent Errors Timeouts Bytes
00000ac4 00000ac4 00000000 00000000 1a2103
Total Errors: 00000000
Signed-off-by: meijian <meijian@xiaomi.com>
The memory allocated with strdup and asprintf is done via lib_malloc
so we need to use lib_free to deallocate memory otherwise the assertion
"Free memory from the wrong heap" is hit with flat mode and user separated
heap enabled mode.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
By:
1. Take out net_ip_binding_laddr/raddr macro
2. INET6_ADDRSTRLEN is long enough for all address buffer and no need to
add 0 to the end of buffer since inet_ntop will do so
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When using IOB queue to store readahead data, we use one IOB for each
UDP packet. Then if the packets are very small, like 10Bytes per packet,
we'll use ~1600 IOBs just for 16KB recv buffer size, which is wasteful
and dangerous. So change conn->readahead to a single IOB chain like TCP.
Benefits:
- Using memory and IOBs more efficiently (small packets are common in
UDP)
Side effects:
- UDP recv buffer size may count the overhead
- A little bit drop in performance (<1%, more seek & copy)
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
NuttShell (NSH) NuttX-10.3.0
ap> ifconfig
=================================================================
Program received signal SIGSEGV, Segmentation fault.
==3920365==ERROR: AddressSanitizer: global-buffer-overflow on address 0x57fb4f2a at pc 0x57177067 bp 0xf1ffebb8 sp 0xf1ffeba8
READ of size 1 at 0x57fb4f2a thread T0
...................
| #10 0xf7ac4339 in __asan::__asan_report_load1 (addr=1476087594) at ../../../../../src/libsanitizer/asan/asan_rtl.cpp:117
| #11 0x57177067 in strncmp (cs=0x57fb4f2a "", ct=0x582d36e0 "stat", nb=4) at string/lib_strncmp.c:40
| #12 0x57f3b467 in netprocfs_opendir (relpath=0x57fb4f26 "net", dir=0xf1ffed80) at procfs/net_procfs.c:398
| #13 0x572b3ae1 in procfs_opendir (mountpt=0xf4602c20, relpath=0x57fb4f26 "net", dir=0xf1ffed80) at procfs/fs_procfs.c:625
| #14 0x572879ff in open_mountpoint (inode=0xf4602c20, relpath=0x57fb4f26 "net", dir=0xf1ffed80) at vfs/fs_dir.c:127
...................
Signed-off-by: chao an <anchao@xiaomi.com>
* fix warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'long unsigned int'
* fix warning: implicit declaration of function 'up_init_exidx'
* tools/nxstyle: Added logic to parse section headers (like Included files, Pre-processor Definitions, etc.) and to assure that the section headers are correct for the file type. Also (1) verify that #include appears only in the 'Included Files' section and that (2) #define only occurs in the Pre-processor definition section.
Right now, there are several places where that rule is not followed. I think most of these are acceptable so these failures only generate warnings, not errors. The warning means that we need to go look at the offending #define or #include and decide if it is a acceptable usage or not.
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
