Jussi Kivilinna
a6e556d31c
I had to make following change to fix interrupt context syslog (INTBUFFER untested)
2017-05-16 10:56:49 -06:00
EunBong Song
5ef00f0b91
drivers/bch: BCH character driver bch_ioctl() always returns -ENOTTY for DIOC_GETPRIV command. It should returns OK if DIOC_GETPRIV command succeeds.
2017-05-16 08:01:05 -06:00
Lederhilger Martin
b8e7d5c455
I had the problem that the transmit FIFO size (= actual elements in FIFO) was slowly increasing over time, and was full after a few hours.
...
The reason was that the code hit the line "canerr("ERROR: No available mailbox\n");" in stm32_cansend, so can_xmit thinks it has sent the packet to the hardware, but actually has not. Therefore the transmit interrupt never happens which would call can_txdone, and so the size of the FIFO size does not decrease.
The reason why the code actually hit the mentioned line above, is because stm32can_txready uses a different (incomplete) condition than stm32can_send to determine if the mailbox can be used for sending, and thus can_xmit forwards the packet to stm32can_send. stm32can_txready considered mailboxes OK for sending if the mailbox was empty, but did not consider that mailboxes may not yet be used if the request completed bit is set - stm32can_txinterrupt has to process these mailboxes first.
Note that I have also modified stm32can_txinterrupt - I removed the if condition, because the CAN controller retries to send the packet until it succeeds. Also if the condition would not evaluate to true, can_txdone would not be called and the FIFO size would not decrease also.
2017-05-16 07:47:18 -06:00
Gregory Nutt
56c8456ff0
Update some comments.
2017-05-16 07:38:57 -06:00
Gregory Nutt
914c5dad0c
TCP: An RST recevied suring the 3-way handshake requires a little more clean-up
2017-05-15 08:10:43 -06:00
Juha Niskanen
34e68a569b
drivers: rename newly introduced up_i2creset to I2C_RESET
2017-05-15 07:22:17 -06:00
Juha Niskanen
b9a769d65d
drivers: fix some bad NULL checks
2017-05-15 07:20:32 -06:00
Gregory Nutt
17e9a88d0d
Merge branch 'ieee802154'
2017-05-14 16:37:55 -06:00
Gregory Nutt
b10d2bbc8c
Merge remote-tracking branch 'origin/master' into ieee802154
2017-05-14 16:37:10 -06:00
Anthony Merlino
2cf94a62d5
Merged in merlin17/nuttx/ieee802154 (pull request #370 )
...
Ieee802154
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-14 22:33:48 +00:00
Anthony Merlino
8ec0b71a59
wireless/ieee802154: Updates configuration settings
2017-05-14 17:59:19 -04:00
Anthony Merlino
2b5e415fab
wireless/ieee802154: Starts implementing START.request primitive
2017-05-14 17:55:15 -04:00
Gregory Nutt
aa57fb159d
TCP: Send RST if applicaiton 'unlistens()' before we complete the connection sequence.
2017-05-14 13:30:59 -06:00
Gregory Nutt
8acfea1197
Fix some typos
2017-05-14 12:14:31 -06:00
Simon Piriou
8d2a3f4856
Merged in spiriou/nuttx/photon_telnet (pull request #369 )
...
photon/wlan: disable network logs and add nsh over telnet
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-14 18:13:11 +00:00
Simon Piriou
7e75d61ea0
photon/wlan: disable network logs and add nsh over telnet
2017-05-14 19:33:44 +02:00
Gregory Nutt
93d73b14ab
Merge branch 'synack'
2017-05-14 11:00:47 -06:00
Gregory Nutt
d339ba9e0e
TCP: Fix some potential error conditions that could result from deferring the connection until the full 3-way handshake has completed.
2017-05-14 10:56:25 -06:00
Simon Piriou
8dc7f6d79e
tcp: wait for 3-Way Handshare before accept() returns
2017-05-14 09:08:32 -06:00
Gregory Nutt
fa649df52e
Photon: Small update from Simon Piriou.
2017-05-14 08:39:53 -06:00
Gregory Nutt
06db5614e7
Fix a warning about can.o appearing twice in the same rule.
2017-05-13 18:05:40 -06:00
Gregory Nutt
a52967a772
Syslog interrrupt buffer: eliminate a warning about an uninitialized variable; simply some related logic.
2017-05-13 17:40:46 -06:00
Matias v01d
820ef7059e
libc/wchar: Versions mbrlen and mbsrtowcs taken and adapted from FreeBSD code (at https://github.com/freebsd/freebsd/ )
2017-05-13 17:07:40 -06:00
Matias v01d
7cc2ee25ec
libc/wchar: Versions mbrlen and mbsrtowcs taken and adapted from FreeBSD code (at https://github.com/freebsd/freebsd/ )
2017-05-13 17:06:58 -06:00
Gregory Nutt
7fd08a60a3
Move prototype from nuttx/include/nuttx/arch.h to apps/include/platform/cxxinitialize.h
2017-05-13 16:53:55 -06:00
Gregory Nutt
b0fda33e13
Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR
2017-05-13 16:01:38 -06:00
Gregory Nutt
27805315f4
Tiva I2C: Correct an in conditional compilation
2017-05-13 14:01:42 -06:00
Gregory Nutt
6e4918c557
Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU
2017-05-13 13:28:15 -06:00
Gregory Nutt
7fe112fe4c
Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition.
2017-05-13 11:44:12 -06:00
Gwenhael Goavec-Merou
02535be36a
STM32F410. Add support for STM32Fr10. STM32F410 is a version of STM32F4 with 32 KB of RAM and 62 or 128 KB of flash.
2017-05-13 08:40:09 -06:00
David Sidrane
c4a2e1399b
Merged in david_s5/nuttx/upstream_kinetis (pull request #368 )
...
kinetis:K66 GPIO and pin mux cleanup
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-13 10:37:20 +00:00
David Sidrane
69a8aecbc8
kinetis:K66 define ALT1 to match ref manual
2017-05-12 17:21:54 -10:00
David Sidrane
700e4ff5b6
kinetis:K66 fixed TMP2_CH1 definition
2017-05-12 17:03:27 -10:00
Alan Carvalho
0e4d341487
Merged in acassis/nuttx_acassis/canard (pull request #367 )
...
Fix the libcanard link version to get it compiling without errors.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-12 20:21:46 +00:00
Alan Carvalho de Assis
6811e18980
Fix the libcanard link version to get it compiling without errors.
2017-05-12 16:59:44 -03:00
Gregory Nutt
14ae6df182
locale.h: Add a bogus definition of locale_t
2017-05-12 10:13:18 -06:00
Gregory Nutt
332ab0359e
Merged can_bus into master
2017-05-12 09:35:19 -06:00
Gregory Nutt
7698790be1
Changes from review of last PR
2017-05-12 09:04:52 -06:00
Gregory Nutt
f981191ac9
Merge branch 'can_bus' of bitbucket.org:nuttx/nuttx into can_bus
2017-05-12 08:59:57 -06:00
Gregory Nutt
fc7c3f5328
syslog: I think this might speed upt the CR-LF scan in syslog_dev_write().
2017-05-12 08:50:56 -06:00
Alan Carvalho de Assis
853d332b6c
Move CAN subsystem to its own directory and put device drivers there
...
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
2017-05-12 11:48:47 -03:00
Gregory Nutt
c84a3e3519
Bitbucket Issue 47: Some of last syslog changes needed to be condition on #ifdef CONFIG_SYSLOG_BUFFER in order to be built without syslog buffering enabled.
2017-05-12 07:58:11 -06:00
Juha Niskanen
ac29d94d9c
Merged in juniskane/nuttx_stm32l4/stm32l4_serial_pr (pull request #365 )
...
STM32L4: port stm32l4_serial_get_uart function from STM32F7
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-12 13:43:36 +00:00
Gregory Nutt
3587a010c3
Merge branch 'ieee802154'
2017-05-12 07:36:08 -06:00
Gregory Nutt
1c9859520f
syslog: There is yet another place where the output can get split. That is in syslog_dev_write(): It will break up the stream to insert a CR before the LF. This can that can be avoid be generating the CR-LF sequence in the buffer and then detecting and ignoring valid CR-LF sequences, rather than expecting syslog_dev_write() to insert the CR in this case.
...
I don't like the idea that syslog_dev_write() still scans the entire output buffer to expand CR-LF sequence. This seems really wasteful, especially in this case where we can be sure that the is no CR or LF without a matching LF or CR. Bu, I think, the existing behavior in syslog_dev_write() must be retained because it is needed in other contexts.
2017-05-12 07:31:50 -06:00
Gregory Nutt
0fc068cc9c
syslog: Avoid flushing syslog_stream buffer, if possible, until lib_vsprintf() completely parses the format. This assures that the flush will flush the entire output, even data that may potentially follow the linefeed. And, in that case, it cannot be interleaved with other devug output. Suggested by Jussi Kivilinna.
2017-05-12 06:58:33 -06:00
Juha Niskanen
46851b33b2
STM32L4: port stm32l4_serial_get_uart function from STM32F7
2017-05-12 15:54:48 +03:00
Gregory Nutt
2c807e4750
Makefile edited online with Bitbucket
2017-05-12 02:48:30 +00:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Gregory Nutt
ba12817f9c
Upate some comments
2017-05-11 13:15:31 -06:00
