SOCK_CTRL is added to provide special control over network drivers
and daemons. Currently, SOCK_DGRAM and SOCK_STREAM perform this control,
but these use socket resources. In the case of usersocket in particular,
this is a waste of the device's limited socket resources.
Updating Simulator for macOS
macOS requires genromfs and X11 Libraries to run Simulators.
* Added instructions to install genromfs
* Added instructions to install X11
Adding Xorg Server
The linker was unable to identify the location of X11 libraries.
removed -L/opt/X11/lib from ln 145
Updating Changes to streamline with other Hosts
The PIC32MZ architecture provides a Peripheral Pin Select (PPS) which
allows mapping peripherals to different GPIO pins. To map a peripheral
output, a value is programmed to a register called RPnxR, where n is
the GPIO port (A thru K) and x is the GPIO pin (0 thru 15). The names
of these registers in code are PIC32MZ_RPnxR. However, in various
definitions, these were mistakenly written as PI32MZ_RPnxR (missing C
in PIC32). This prevents using any of the affected mappings. This
issue is fixed by repairing the define names.
* arch/mips/src/pic32mz/hardware/pic32mzec_pps.h,
arch/mips/src/pic32mz/hardware/pic32mzef_pps.h:
(): s/PI32MZ/PIC32MZ/g
The defines for Peripheral Pin Select (PPS) register RPE5R were called
RPE4R inadvertently; however, mappings elsewhere in the file used the
correct name of RPE5R, so the build would break if anyone attempted to
map those peripherals to GPIO pin E5. This issue is now fixed.
* arch/mips/src/pic32mz/hardware/pic32mzec_pps.h,
arch/mips/src/pic32mz/hardware/pic32mzef_pps.h:
(PIC32MZ_RPE4R_OFFSET): Rename to PIC32MZ_RPE5R_OFFSET.
(PIC32MZ_RPE4R): Rename to PIC32MZ_RPE5R.
When I checked how this register was set I discovered that 128 was not
accepted by the H7 but 64 was ok. Looking at the STM32Cube's HAL it
seems to be only 64 words long, however, the reference manual claims
otherwise.
I have opened a discussion on the ST community forum
https://community.st.com/s/question/0D73W000001nzqFSAQ
but unfortunately not received an answer yet.
In the meantime, I think, we should update this to what I found to be
working though.
Signed-off-by: Julian Oes <julian@oes.ch>
The TERMIOS(3) function tcsendbreak() and the IOCTLs TCSBRK and TCSBRKP
transmit a serial line Break.
Previously NuttX included an extern declaration for tcsendbreak() and
defines for TCSBRK and TCSBRKP but none of these were implemented.
Attempting to build programs that called tcsendbreak() would fail with
a linker error; attempting to use TCSBRK and TCSBRKP would result in an
error at runtime.
This changeset adds the tcsendbreak() function and handling for TCSBRK
and TCSBRKP; tcsendbreak() is implemented in terms of TCSBRK. Both
TCSBRK and TCSBRKP are implemented in terms of the BSD-compatible Break
IOCTLs TIOCSBRK and TIOCCBRK, which must be provided by the lower half
serial driver. Currently, not all lower half serial drivers in NuttX
support these IOCTLs. Those that do implement them may need one or more
Kconfig options to be set, such as `CONFIG_*_U[S]ART_BREAKS` and, on
some architectures, a separate `CONFIG_*_SERIALBRK_BSDCOMPAT`.
* drivers/serial/serial.c
(uart_tcsendbreak): New function.
(uart_ioctl): Implement TCSBRK and TCSBRKP.
* libs/libc/termios/lib_tcsendbreak.c
(): New file.
* libs/libc/termios/Make.defs
(CSRCS): Add lib_tcsendbreak.c to the build.
Thanks to Xiang Xiao for PR feedback.
Co-authored-by: Xiang Xiao <xiaoxiang781216@gmail.com>
The version information basically uses 20 characters for date and time,
which is small enough to specify an arbitrary version string. Therefore,
increase the buffer a little.
caculate blk address when mempool_multiple_free
have a bug. need a real blocksize to caulate the
memory address.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Without this POSIX-compatible definition, support for nativesockets module in Nimlang is problematic.
.nimcache/(snip)@spure@snativesockets.nim.c: In function 'toInt__pureZnativesockets_69':
.nimcache/(snip): error: 'IPPROTO_ICMPV6' undeclared (first use in this function); did you mean 'IPPROTO_ICMP6'?
291 | result = IPPROTO_ICMPV6;
| ^~~~~~~~~~~~~~
| IPPROTO_ICMP6
Signed-off-by: Takeyoshi Kikuchi <kikuchi@centurysys.co.jp>
user_main: vfork() test
=================================================================
==3754757==ERROR: AddressSanitizer: stack-buffer-underflow on address 0xae9126f0 at pc 0x56845661 bp 0xae912570 sp 0xae912560
READ of size 1 at 0xae9126f0 thread T0
#0 0x56845660 in memcpy string/lib_memcpy.c:44
#1 0x56b70f61 in up_vfork sim/sim_vfork.c:133
#2 0x567c0b85 in vfork (/home/ligd/platform/sim/nuttx/nuttx+0x26bb85)
0xae9126f0 is located 73456 bytes inside of 73728-byte region [0xae900800,0xae912800)
allocated by thread T0 here:
#0 0xf7ab1c2f in __interceptor_posix_memalign ../../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:226
SUMMARY: AddressSanitizer: stack-buffer-underflow string/lib_memcpy.c:44 in memcpy
Signed-off-by: ligd <liguiding1@xiaomi.com>
The priorities for finding a network adapter are as follows:
1. if laddr is not ANY, use laddr to find device;
2. if laddr is ANY, and bound index is not 0, use bound index
to find device;
3. if laddr is ANY and no device is bound, use raddr to find
device.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This commit updates configuration pikron-bb (configuration for open
hardware experimental board) to support permanent magnet sychnronous
motor control. This includes setup of PWM, GPIO and ADC peripherals.
Required follow up changes are done to pinout definition.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Current implementation supports the trigger generation only from timer
capture on period value. This is sufficient for PWM synchronization but
may not be enough for other purposes as ADC triggering for example.
This change adds an option to generate the trigger based on a duty
cycle value.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
