sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
28,629 Commits 1 Branch 0 Tags 291 MiB
aad82bcd9f
Commit Graph

943 Commits

Author SHA1 Message Date
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
fec3d2cf62 recvfrom: Fixes for compilation with only raw, packet sockets 2015-09-14 09:06:08 -06:00
Gregory Nutt
a7e43c7fdb Eliminate some warnings 2015-09-08 09:20:18 -06:00
Gregory Nutt
d700793077 Fix a compile error when IPv6 is enabled 2015-09-07 16:34:25 -06:00
Alan Carvalho de Assis
f10a103108 Fix tcp_send_unbuffered when NET_ETHERNET is not defined. 2015-09-07 13:31:35 -06:00
Gregory Nutt
9c66bde5b0 Fix typo in pre-processor command noted by Pierre-noel Bouteville. Also move # of pre-processior command to column 1 2015-09-05 09:10:48 -06:00
Gregory Nutt
14297afb83 Cosmetic fix to break up long line 2015-09-03 07:33:50 -06:00
Gregory Nutt
36f4d0e9fc Fix a error in some comments 2015-09-02 20:03:28 -06:00
Gregory Nutt
0e2986f131 net/tcp: The logic that binds a specific networkd device to a connection was faulty for the case of multiple network devices. On bind(), the local address should be used to associate a device with the connection (if the local address is not INADDR_ANY); On connect(), the remote address should be used (in case the local address is INADDR_ANY). On accept(), it does not matter but the remote address is the one guarenteed to be available. 2015-09-02 19:48:31 -06:00
Gregory Nutt
9fcad39a45 Trivial typo fix 2015-09-02 10:09:33 -06:00
Paul A. Patience
3b89eabd50 Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2. 2015-09-01 13:52:29 -04:00
Gregory Nutt
63071a563a Costmetic changes 2015-08-27 10:38:43 -06:00
Gregory Nutt
b1e09d4847 net/socket and net/tcp: Fix a problem in whent there are multiple network devices. Polls were being sent to all TCP sockets before. This is not good because it means that packets may sometimes be sent out on the wrong device. That is inefficient because it will cause retransmissions and bad performance. But, worse, when one of the devices is not Ethernet, it will have a different MSS and, as a result, incorrect data transfers can cause crashes. The fix is to lock into a single device once the MSS is locked locked down. 2015-08-27 09:06:46 -06:00
Gregory Nutt
3bcdb218ff Networking: Get rid of the tcp_mss macro. It is confusing and only obfuscates what is really going on 2015-08-27 08:39:17 -06:00
Gregory Nutt
007aabc46f Fix a badly formatted comment 2015-08-26 19:18:04 -06:00
SaeHie Park
a268e0aeb9 Fix a typo from an earlier commit 2015-08-26 18:12:58 -06:00
Saehie ParK
e6dbd3d903 Networking: Fix network device name assignment logic for the case of the local loopback device. There is only one local loopback network device and it is unnumbered 2015-08-25 20:03:25 -06:00
Anton D. Kachalov
b125c36849 Field `d_sndlen' is unsigned. It is always >= 0. 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-26 00:16:52 +03:00
SaeHie Park
e983e547e1 Networking: Correct return value from psock_tcp_accept(). From SaeHie Park 2015-08-25 07:15:21 -06:00
Gregory Nutt
79aa3d40b0 Kconfig: CONFIG_NET_MULTILINK and CONFIG_NET_MULTINIC must be support if the loopback device and any real network device are selected 2015-08-25 06:51:15 -06:00
Gregory Nutt
3c5f817513 Networking: Local loopback is basically functional and is no longer EXPERIMENTAL 2015-08-24 13:58:57 -06:00
Gregory Nutt
933d74e5c1 Networking: With these changes, I can ping the local loopback device from the simulator 2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978 Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL 2015-08-24 11:29:54 -06:00
Gregory Nutt
07bdff9ef7 Networking: Add NetDB support for the local loopback device 2015-08-24 10:08:26 -06:00
Gregory Nutt
e21501c699 Merge remote-tracking branch 'origin/master' into localhost 2015-08-24 08:29:36 -06:00
Gregory Nutt
569ff602ea Networking: Remove bogus references to PPP as a link layer protocol 2015-08-24 08:29:07 -06:00
Gregory Nutt
ea2fafb024 Add definitions to support a local loopback link layer 2015-08-24 08:25:08 -06:00
Gregory Nutt
89b5ef8d35 wdogs: Fix counting of free, pre-allocated wdog timers. The could could get decremented below zero in some situations 2015-08-21 11:30:22 -06:00
Pavel Pisa
12b1c04508 recvfrom(): Correct wait for new data when NET_UDP_READAHEAD is enabled. Fix size accounting when recvfrom_udpreadahead() sets state.rf_recvlen == -1. I have not checked if data are accumulated to the right position in the buffer however. 
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
 2015-08-21 09:15:06 -06:00
Gregory Nutt
4c4868c69f More cosmetic changes: Fix some errors in comments and some indentation problems 2015-08-11 19:23:51 -06:00
Gregory Nutt
850225223d Costmetic fix to a comment 2015-08-11 19:21:15 -06:00
Gregory Nutt
530d229361 net/udp: Add support for send() with connected UDP sockets 2015-08-11 19:17:55 -06:00
Max Neklyudov
7d04104485 Networking: Allow receipt of empty UDP packets. From Max Neklyudov 2015-08-11 08:34:16 -06:00
Gregory Nutt
f94fe747ae Undo part of a previous change. Move get/sethostname back from net/netdb to libc/unistd 2015-07-08 11:11:52 -06:00
Gregory Nutt
fca919f3d2 Networking: Fix some compilation issues noted with network is build with CONFIG_BUILD_KERNEL 2015-07-05 11:18:56 -06:00
Gregory Nutt
6380832ab7 Move the header of set/sethostname from libc/unisted to net/netdb. This is OS internal stuff 2015-07-05 10:43:37 -06:00
Stavros Polymenis
701509f9bd Add implementations of uname() and gethost(). From Stavros Polymenis. 2015-07-03 07:50:27 -06:00
Gregory Nutt
09c7373f24 Fix misc. compilation error/warning detected by tools/testbuild.sh 2015-07-01 14:33:37 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
0ad53183e1 Networking: Fix a compile problem introduced in NuttX-7.6 when CONFIG_NET_SENDFILE=y 2015-06-24 14:52:57 -06:00
Gregory Nutt
ed9c45bcef Networking: Fix compilation error if IPv6 is enabled 2015-06-17 15:00:04 -06:00
Gregory Nutt
8f7752d956 Networking: Modify how callback structures are stored to avoid another potential use of a stal pointer. 2015-06-03 08:11:57 -06:00
Gregory Nutt
edbb5d0840 networking: Correct a typo introduced with recent networking changes 2015-06-02 15:04:02 -06:00
Gregory Nutt
e22deff1ab TCP connect. Move the location where the socket is marked as connected in order to avoid a potential race condition 2015-05-31 12:24:24 -06:00
Gregory Nutt
b493dde4cf TCP networking: In the TCP connection operation, it was trying to setup the network monitor BEFORE the socket was successfully connected. This, of course, has ALWAYS failed because the socket is not yet connected and the TCP state is not yet correct for a connected socket. However, because of other changes net_startmonitor(0 no returns a failure condition that causes worse problems when trying to connect. The fix is to move the logic that starts the network monitor to AFTER the socket has been successfully connected. 2015-05-31 11:35:28 -06:00
Gregory Nutt
a47a0d237c Costmetic changes to networking logic 2015-05-31 10:29:53 -06:00
Gregory Nutt
33085cb309 Networking: The network device list was protected by a re-entrant semaphore. With the recent change to support network device callback, the network stack needs to access the network device list too. Some drivers, however, run the network stack from the interrupt level -- this is bad but a fact in the current state. Of course,those drivers are unable to take the semaphore and will assert. 
The solution here is to eliminate the device devices semaphore altogether.  This eliminates netdev_semtake() and netdev_semgive() and replaces them with net_lock() and net_unlock() which have larger scope as needed for this purpose.
 2015-05-31 08:34:03 -06:00
Gregory Nutt
6687e156e6 Revamp last change. IFF_UP only required when allocating callback, not freeing. 2015-05-30 21:13:58 -06:00
Gregory Nutt
28b46c7bfa To be valid, a network device must not only exist, but be in the UP state 2015-05-30 12:54:18 -06:00
Gregory Nutt
cc340aaa92 TCP networking: Since the network monitor now allocates a callback structure, it is critical to make sure that the networking monitor is stopped when the socket is closed or any other loss of connection. What was innocuous before would now be a memory leak 2015-05-30 11:49:55 -06:00
Gregory Nutt
8b029fbbee TCP networking: Hook the network monitor into the device event notification logic 2015-05-30 11:29:47 -06:00
Gregory Nutt
933b95ac80 Forgot to add a file in the last commit 2015-05-30 09:17:46 -06:00
Gregory Nutt
04a661a97c TCP networking: Add support for network driver events 2015-05-30 09:12:27 -06:00
Gregory Nutt
ab50e9d04d Networking: Get rid of g_ipv4_allzeroaddr and g_ipv4_alloneaddr. It is more efficient and more intuitive to use INADDR_ANY and INADDR_BROADCAST 2015-05-29 15:16:11 -06:00
Gregory Nutt
34509a9ad5 UDP should use dev=NULL if the address in the lookup is INADDR_ANY 2015-05-29 14:56:44 -06:00
Gregory Nutt
0bdf2d5360 UDP Networking: Misc fixes to get the last changes working + cleanup 2015-05-29 14:32:56 -06:00
Gregory Nutt
fa8b7c19b7 Forgot to add a file in the last commit 2015-05-29 11:03:02 -06:00
Gregory Nutt
f10fdf7ad4 Networking: Add a test to see a device pointer is still valid 2015-05-29 11:01:03 -06:00
Gregory Nutt
2102892e7b Fix missing file and some compilation errors from the last UDP committ 2015-05-29 10:45:41 -06:00
Gregory Nutt
e672bcebfd UDP Networking: Add support for device event notification for UDP transfers. 2015-05-29 10:21:06 -06:00
Gregory Nutt
e28a8b1416 Raw sockets: Correct some compile issues; better modularized device-related logic 2015-05-29 08:47:21 -06:00
Gregory Nutt
988fbf0dcc Merge branch 'master' of ssh://git.code.sf.net/p/nuttx/git into multinic 
Conflicts:
	nuttx/ChangeLog
 2015-05-29 08:15:17 -06:00
Gregory Nutt
5337176cdf Networking: setsockopt() fails when setting timeouts to values less that an 100 msec. That is because the timeout is limited to stops of 1 decisecond and because the conversion of structure timeval was truncating the microsecond remainder. The utility net_timeval2dsec now accespts and option to determin how it handles the remainder: truncate, discarding the remainder, use the remainder to round to the closed decisecond value, or use any non-zero remainder to the next larger whole decisecond value. 
For the setsockopt() case, it will always use the final option.  This means that a time of zero (i.e., not timeout) can only occur if the value zero was explicated provided to setsockopt().
 2015-05-29 07:17:15 -06:00
Gregory Nutt
0595d54470 Correct some comments 2015-05-28 19:44:04 -06:00
Gregory Nutt
4747c04c94 Trivial correction to some comments 2015-05-28 19:43:35 -06:00
Gregory Nutt
b5c005d5a4 Merge remote-tracking branch 'origin/master' into multinic 
Conflicts:
	nuttx/ChangeLog
 2015-05-28 19:30:48 -06:00
Gregory Nutt
7ec0725533 Missed a couple of function headers 2015-05-28 19:28:41 -06:00
Gregory Nutt
d319b7c6f0 Networking: PKT logic now uses the device event list 2015-05-28 12:40:05 -06:00
Gregory Nutt
e81f279315 Networking: Modify event list handling: Now there are two event lists each device structure: (1) One is for ARP and ICMP data related evetns, the other is for device related events. Callback allocation/free routines no accept a device paramter as well as a list: If the device paramter is added, then the callback goes into both the connection-related liast AND the device event list. Thus each socket type can received both custom data-related events as well as common device related events. 2015-05-28 12:01:38 -06:00
Gregory Nutt
3606d05888 Merge branch 'multinic' 2015-05-28 09:07:18 -06:00
Gregory Nutt
3260db7dbe Reorder some network events bitset to make the event class clearer 2015-05-28 08:55:36 -06:00
Gregory Nutt
01d176af76 net_startmonitor.c always returned zero. In the case where a socket has already been closed, it correctly handled the disconnetion event but still returned OK. Returning OK causes the callers of net_startmonitor to assume that the connection was okay, undoing the good things that net_startmonitor did and causing the socket to be marked as connected. This behavior was noted by Pelle Windestam. 2015-05-28 08:23:51 -06:00
Gregory Nutt
0e2b6929b4 Add function headers to prototypes in net/socket/socket.h 2015-05-28 07:26:03 -06:00
Gregory Nutt
d6c3ed1c6f Networking: Fixes an important TCP bug: 16-bit flags was being converted to 8-bits in a few locations, causing loss of status indications 2015-05-27 17:17:42 -06:00
Gregory Nutt
4fd0192a3e Networking: No that ARP, ICMP, and ICMPv6 reside in the same list we need to make the definitions of ARP_POLL, ICMP_POLL, and ICMPv6_POLL different because there are small differences in the context for each. 2015-05-27 15:04:51 -06:00
Gregory Nutt
390eeaae69 Add function headers to netdev.h header file 2015-05-27 14:34:15 -06:00
Gregory Nutt
2ecff2a432 Add some missing NETDEV_DOWN support for ICMPv6 auto configuration and router support 2015-05-27 12:49:39 -06:00
Gregory Nutt
7d8e8bc188 Missed a place where NETDEV_DOWN needs to be added to notification flags 2015-05-27 12:22:07 -06:00
Gregory Nutt
b94321cfb4 Extend device specific callbacks to ICMPv6 and ARP. Fix some IPv6 compilation errors that have crept in 2015-05-27 11:39:44 -06:00
Gregory Nutt
8ecb84ed89 Improve icmp handling if MULTINIC enabled. From Max Neklyudov 2015-05-27 09:26:00 -06:00
Gregory Nutt
608f812407 Fix bug in IPv6 router from Max Neklyudov. 2015-05-13 07:26:24 -06:00
Gregory Nutt
f20ac5ef93 Add inclusion of assert.h in networking files where needed to avoid compilation errors. From Max Neklyudov. 2015-05-13 07:24:22 -06:00
Gregory Nutt
8cb4e78a1a Complete implementation of the IPv6 routing logic. From Max Neklyudov. 2015-05-13 07:22:02 -06:00
Gregory Nutt
0f5c35260b Local sockets: Local stream sockets had problem of double releasing pipes (both server and client attempt release), which causes wrong pipe pair being closed in multi-client case. Solve by adding per connection instance ID to pipe names. From Jussi Kivilinna (2015-05-12). 2015-05-12 07:47:32 -06:00
Gregory Nutt
3c1af2feed Local sockets: Add poll support for Unix stream sockets. From Jussi Kivilinna. 2015-05-12 07:41:12 -06:00
Gregory Nutt
2fcb93d2ca Correct some network lock logic: Two error conditions where the network was not being unlocked and one where it was getting unlocked twice. From Jussi Kivilinna. 2015-05-12 07:28:26 -06:00
Gregory Nutt
1f3ee83134 Increase the size of the number of bytes sent from uint16_t to uint32_t in order to avoid TCP errors with long sessions. For exmple: 
int hello_main(int argc, char *argv[])
{
   uint32_t i;
   for(i = 0; i < 65536; i++)
    {
      printf("Hello, World!!\n");
    }

  printf("press any key!!\n");
  if (getchar()=='t')
    return 0;
  else
    return 1;
}

When ran in a Telnet session, the "press any key" is not displayed because the tcp session closed unexpectedly with:

tcp_input: ERROR: conn->sndseq xx, conn->unacked xx"

This is fixed by increasing the width of conn->sent to 32-bits to prevent overflow.

From Rony XLN
 2015-05-11 07:14:25 -06:00
Gregory Nutt
d35926ea4a Fix typo introduced by commit a00f14a60a8ec54fbcf63e44d00f7101ec7cb5a3 2015-05-08 14:19:18 -06:00
Gregory Nutt
00011d4766 Another newly missing semicolon after a debug assertion. Noted by Librae 2015-04-29 15:56:08 -06:00
Gregory Nutt
621eae86b1 Networking: If IPV6 is not enabled, an warning occurs for an unused variable, which is currently used inside the IPV6 block, but declared outside. From ObitalFox. 2015-04-27 11:28:28 -06:00
Gregory Nutt
7a745c3fa4 Use common macro(s) for calculating link layer header length. From Brennan Ashton. 2015-04-13 13:53:13 -06:00
Gregory Nutt
3840c2a14b Fix several typos in comments 2015-04-09 16:13:03 -06:00
Gregory Nutt
3ba9dda227 socket: net_dupsd: Do not call sockfd_socket() twice. From Juha Niskanen 2015-03-12 08:11:08 -06:00
Gregory Nutt
21d6e41032 Add TUN device. From Max Neklyudov 2015-03-11 06:52:56 -06:00
Gregory Nutt
5c13722416 Networking: Improve the network device registration logic. When multiple link types are used, modify how each interface number is assigned to the device name by incrementing the device number individually for each interface link type. From Max Neklyudov. 2015-02-27 08:23:14 -06:00
Gregory Nutt
19f3d46eb0 Fix a list handling error in netdev_unregister(). From Max Neklyudov 2015-02-27 08:01:31 -06:00
Gregory Nutt
cded7ea682 Fix some time value changes; mostly changing greater than 1000000000 to greater than or equal to 1000000000. From Juha Niskanen 2015-02-20 07:07:36 -06:00
Gregory Nutt
63ab39b274 VFS: The inode unlink method should not be support if operations on the root pseudo-filesystem are disabled. 2015-02-18 09:34:58 -06:00
Gregory Nutt
db741dd695 Move some useful internal logic from recvfrom.c and udp_callback.c and put them in ip.h where they can be used more generally 2015-02-17 07:37:44 -06:00
Gregory Nutt
686dcbb79c Move some useful internal macros from udp_send.c and put them in ip.h where they can be used more generally 2015-02-17 07:08:11 -06:00
Gregory Nutt
eb8f5e548f Purely cosmetic changes resulting from last review IPv6 UDP change 2015-02-16 15:23:02 -06:00
Gregory Nutt
3f5ff4b210 IPv4 mapping to IPv6 implementation. Just for UDP. From Macs Neklyudov 2015-02-16 14:33:58 -06:00
Gregory Nutt
d6704a1cd7 Suffer the consequences of moving struct timeval to its correct location 2015-02-15 15:18:35 -06:00
Gregory Nutt
8337710084 Stray semicolon caused compile failure when IPv6 enabled 2015-02-14 09:30:22 -06:00
Gregory Nutt
8840102554 Networking: Divide net_intiialize() into net_setup() and net_initialize() to solve a chicken-and-egg problem. net_setup() must be caleld before up_initialize() is called so that networking data structures are ready to register new network devices. 
net_initialize() now does only timer related operations and is called AFTER up_initialize() where the timers are configured.  This is really.
 2015-02-14 06:36:53 -06:00
Gregory Nutt
77d8f2f63d Add some inclusions of nuttx/net.h to two files. Without these there can be compilation errors in certain configurations. From Max Neklyudov. 2015-02-13 13:43:19 -06:00
Gregory Nutt
005643de2c Networking: Fix a compilation error recently introduced into the raw packet logic 2015-02-11 09:30:30 -06:00
Gregory Nutt
a82b8fd71f Networking: Fix several build errors/warning with IPv4 + IPv6 + multiple networks are enabled. 2015-02-10 06:54:10 -06:00
Gregory Nutt
8a380a084d IOB Configuration: Default number of IOB changes must be more than zero is UDP read-ahead is enabled. 2015-02-10 06:25:55 -06:00
Gregory Nutt
b756df982d net/: Lots of build problems introduced into multiple NIC support. Many places where conditional logic based on CONFIG_NETDEV_MULTINIC is confused with CONFIG_NET_MULTILINK. Lots of code changed with IPv6 that was never compiled with MULTINIC enabled. Still some problem with parameter passing. 2015-02-09 18:15:34 -06:00
Gregory Nutt
559f1ef825 Networking: Clean up and consolidate some clunky stuff by adding new net_timedwait() function 2015-02-09 07:50:10 -06:00
Gregory Nutt
1928feafca Networking: Fix some errors that crept in with IPv6 2015-02-06 13:34:19 -06:00
Gregory Nutt
252802d1cd Remove inclusion of some un-necessary header files. 2015-02-06 08:50:53 -06:00
Gregory Nutt
3e6705b526 IPv6: Separate function that converts prefix lengths to a netmask 2015-02-06 08:11:09 -06:00
Gregory Nutt
10cf7e9634 Make some conditional compilation consistent 2015-02-05 14:26:11 -06:00
Gregory Nutt
3bd6dcf435 IPv6 fixes: Both ICMPv6 autonomous auto-configuration and the ICMPv6 router function appear to be fully functional. 2015-02-05 12:48:02 -06:00
Gregory Nutt
c7f71c99a5 Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled 2015-02-05 11:47:56 -06:00
Gregory Nutt
6568d94902 ICMPv6: Add logic to behave like a router (if so configured): NuttX will not send the router advertisement message in response to any router solicitation messages. 2015-02-05 09:43:29 -06:00
Gregory Nutt
111f4a45a3 Forgot to add this file before a previous commit 2015-02-05 09:43:07 -06:00
Gregory Nutt
da1d1d7139 ICMPv6: Add option to send Router Advertisement Messages. 2015-02-05 09:28:00 -06:00
Gregory Nutt
6f3f43d930 IPv6: Add a netmaks for the local link address 2015-02-05 05:43:57 -06:00
Gregory Nutt
453c25cdbb Minor logic simplification 2015-02-04 21:06:11 -06:00
Gregory Nutt
28b89b7a65 ICMPv6 Auto-configuration: If no router reponds to the Router Solicitation, claim the link local address by sending the Neighbor Advertisement and return success 2015-02-04 16:13:27 -06:00
Gregory Nutt
c5ed77120f ICMPv6: Separate out Neighbor Advertise message so that we can reuse it 2015-02-04 15:43:54 -06:00
Gregory Nutt
f558dfbb96 Remove unnecessary, inappropriate inclusion of ARP head file in IPv6 code 2015-02-04 14:52:46 -06:00
Gregory Nutt
24d800398e Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address 2015-02-04 14:51:20 -06:00
Gregory Nutt
6159d1307d Forgot to add a file from a previous commit 2015-02-03 17:45:24 -06:00
Gregory Nutt
0e38ca9a42 ICMPv6: Fix some multi-cast addresses 2015-02-03 17:26:05 -06:00
Gregory Nutt
f7ace410d1 Minor updates to comments, debug messages, documentation 2015-02-03 17:01:48 -06:00
Gregory Nutt
154d3ce955 ICMPv6: Some initial bugfix from first tests of the ICMPv6 auto-configuration logic. so far so good but a lot more testing is needed 2015-02-03 16:19:08 -06:00
Gregory Nutt
9791e829f5 ICMPv6: This completes coding of the ICMPv6 auto-configuration feature. It is not yet functional 2015-02-03 15:40:56 -06:00
Gregory Nutt
66f0198e3f Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete 2015-02-03 13:25:28 -06:00
Gregory Nutt
553b93cd23 Costmetic updates to comments 2015-02-03 11:19:33 -06:00
Gregory Nutt
0e23712db4 Add an ioctal() that can be used to perform ICMPv6 auto-configuration 2015-02-03 08:54:42 -06:00
Gregory Nutt
b427e8288b Add netlib and application hooks for ICMPv6 auto-configuration (still incomplete 2015-02-03 08:01:55 -06:00
Gregory Nutt
d89073ae13 Add some comments to C files 2015-02-03 06:04:54 -06:00
Gregory Nutt
88f6573f31 ICMPv6: Add file/build structure that will eventually support ICMPv6 auto-configuration 2015-02-02 17:54:48 -06:00
Gregory Nutt
f019d11384 Restore 20Msec default 2015-02-02 14:59:49 -06:00
Gregory Nutt
bba3fccd74 Networking: Apply the same ARP fix for the Neighbor Solicitation logic 2015-02-02 14:50:16 -06:00
Gregory Nutt
e4c602747b Networking: Fixes another CONFIG_NET_NOINTS issues. When called sem_timedwait() with the network locked, the network stays logcked while we wait which is not what we want (without CONFIG_NET_NOINTS, interrupts are re-enabled while we wait and all is well). 2015-02-02 14:48:11 -06:00
Gregory Nutt
fb72b1b1b7 Auto neighbor solicitation is no longer EXPERIMENTAL and is the default for the DK-TM4C129X/ipv6 configuration 2015-02-02 14:09:06 -06:00
Gregory Nutt
a07a764d42 ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation). 2015-02-02 13:44:31 -06:00
Gregory Nutt
4ce94a7e95 IPv6: Eliminate a warning from UDP code 2015-02-02 11:37:22 -06:00
Gregory Nutt
b1b8c0e47d IPv6: More framework for automatic neighbor solicition. I think this also corrects and error in a broadcast/multicast address chedk 2015-02-02 11:34:51 -06:00
Gregory Nutt
3385082b99 IPv6: Remove an unusd file (kruft from original IPv6 develoment); Add inital hooks to support automatic Neighbor Solitication 2015-02-02 10:49:50 -06:00
Gregory Nutt
011ff49685 Cosmetic update to a few comments 2015-02-01 12:23:57 -06:00
Gregory Nutt
6d7891c4de Fix compile issues with configs/sim/nettest 2015-02-01 12:00:30 -06:00
Gregory Nutt
898d511e05 Unix domain: Fix some bugs in logic the frees stream FIFOs 2015-02-01 09:16:55 -06:00
Gregory Nutt
f8bb77365a Unix domain: Enable logic to clean up the FIFOs underlying stream sockets with those sockets are disconnected. Tehre is still no corresponding clean-up logic in place for Unix domain datagram sockets because the life of the FIFO is not as well known in that case 2015-02-01 08:52:26 -06:00
Gregory Nutt
0fc8d2fcc5 Unix domain: Add options to build in stream or datagram support separately 2015-01-31 07:58:51 -06:00