Gregory Nutt
427e5c98c5
Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module
2015-01-09 14:10:31 -06:00
Gregory Nutt
80c7fa20b9
Update README
2015-01-07 06:23:24 -06:00
Gregory Nutt
57202946a8
DK-TM42129X: Support for the TMP100 temperature sensor is enabled by default in the NSH configuration
2015-01-06 13:23:35 -06:00
Gregory Nutt
4d7efb5865
DK-TM4C129X: Add logic to initialize the TMP-100 temperature sensor driver at startup
2015-01-06 13:23:02 -06:00
Gregory Nutt
524ccad0ba
DK-TM4C129X: Add support for on-board TMP100 temperature sensor
2015-01-06 11:50:56 -06:00
Gregory Nutt
9eda193c39
Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt
2015-01-05 15:12:45 -06:00
Gregory Nutt
4457727cec
DK-TM4C129X: Enable I2C6 and the I2C tool in the default configuration
2015-01-05 13:40:55 -06:00
Gregory Nutt
a3b32b0545
DK-TM4C129X: The network monitor is no enabled by default in NSH configuration
2015-01-05 12:09:33 -06:00
Gregory Nutt
43824e4725
Tiva Ethernet: Add support for PHY interrupts
2015-01-03 13:16:26 -06:00
Gregory Nutt
a6d128c06a
DK-TM4C129X: Ethernet networking is now enabled by default in the NSH configuration
2015-01-03 10:27:04 -06:00
Gregory Nutt
1b2d2f81cf
DK-TM4C129X: Fix RAM size in defconfig files
2015-01-03 09:44:02 -06:00
Gregory Nutt
af8245c42c
DK_TM4C129X: Add more GPIO pin definitions
2015-01-01 14:16:05 -06:00
Gregory Nutt
e69855eb72
DK_TM4C129X: Add some GPIO pin definitions
2015-01-01 13:55:53 -06:00
Gregory Nutt
7fbd970ed6
TM4C129X Ethernet: Add logic to get pre-programmed MAC address from user FLASH registers
2015-01-01 12:28:46 -06:00
Gregory Nutt
47480b4696
Tiva Ethernet: Update Ethernet intializaiton logic. Still things to be done
2015-01-01 07:55:15 -06:00
Gregory Nutt
9c74f502d6
Refresh configuration
2014-12-31 07:32:47 -06:00
Gregory Nutt
db574ef3cb
Remove menuconfig warning
2014-12-31 07:31:49 -06:00
Gregory Nutt
aff4c9cfd0
stm32f429i-disco: change ltdc initializing during boot up. This moves initializing of the ili9341 lcd and ltdc driver to the board specific initializing routine.
...
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-29 09:50:36 -06:00
Gregory Nutt
868d4b7afc
STM32F429i-Disco USB: Strangeness: Conditioned on OTGHS but called otgfs initialize routines. Must be something broken
2014-12-29 07:02:32 -06:00
Gregory Nutt
217f3fec70
STM32F429i-Disco USBMC configuration: SPI1 should not be enabled. It is not supported
2014-12-29 07:01:36 -06:00
Gregory Nutt
83b8e15570
Fir STM32v2: Refresh configuration
2014-12-28 18:29:35 -06:00
Gregory Nutt
3089f2e24e
Fire STM32v2: Fix missing stuff in Kconfig file
2014-12-28 18:29:13 -06:00
Gregory Nutt
20b5980828
C5471 EVM: Refresh configurations
2014-12-28 18:15:30 -06:00
Gregory Nutt
9a79849116
Cloudctrl: Add missing configuration logic
2014-12-28 17:51:11 -06:00
Gregory Nutt
78d6c9d21c
Compal e86 NSH: Fix numerous typos in Make.defs
2014-12-28 17:34:59 -06:00
Gregory Nutt
22125246b0
Hymini-STM32v USB MSC: Fix configuration. Needs mountpoint support for USB MSC. Refreshed
2014-12-28 17:12:03 -06:00
Gregory Nutt
febd316186
Tiva SSI: Fix some recent breakage to the Tiva SSI driver for the case where only one SSI modules is enabled
2014-12-28 16:55:47 -06:00
Gregory Nutt
d74b28befd
MBED NSH: Should not have CONFIG_SPI_EXCHANAGE in the configuration
2014-12-28 16:39:02 -06:00
Gregory Nutt
de6e8d1852
Freedom-KL25z: Fix breakage from last configuration refresh
2014-12-28 15:23:37 -06:00
Gregory Nutt
6368445671
Mikroe-STM32F4: Refresh one configurations, turning off DEBUG
2014-12-28 14:39:19 -06:00
Gregory Nutt
0c79c319d2
LM3S6965-EK: Refresh one configurations, turning off DEBUG
2014-12-28 14:35:47 -06:00
Gregory Nutt
e847dd1ca0
Freedom KL25Z: Refresh one configurations
2014-12-28 14:30:44 -06:00
Gregory Nutt
21e7606a88
Eagle100: Refresh one configurations, turning off DEBUG
2014-12-28 14:22:11 -06:00
Gregory Nutt
0d33717de4
STM32F429-Disco: Refresh five configurations, turning off DEBUG
2014-12-28 14:04:53 -06:00
Gregory Nutt
06db611676
STM32F40G-EVAL: Refresh two configurations, turning off DEBUG
2014-12-28 13:53:53 -06:00
Gregory Nutt
c1f61b813c
Refresh Configuration
2014-12-26 09:33:20 -06:00
Gregory Nutt
7d06a77555
Update px4fmu-v2_upstream config
2014-12-26 08:40:02 -06:00
Gregory Nutt
9e0483e37c
Fix columnar alignment in Kconfig file. From David Sidrane
2014-12-26 08:37:27 -06:00
Gregory Nutt
9bed954924
Cosmet updates to comments and README files
2014-12-24 08:15:21 -06:00
Gregory Nutt
a322029dbe
DK-TM4C129X: Fix sense of LEDs; active high. Also GPIO for blue and green reversed
2014-12-22 17:41:04 -06:00
Gregory Nutt
b9d0094124
TM4C129X: A small step toward understanding new Tiva clocking
2014-12-22 09:30:41 -06:00
Gregory Nutt
7e5a0f227d
Tiva SSI and board configurations: hange negative Tiva logic CONFIG_SSIx_DISABLE to positive logic CONFIG_TIVA_SSIx. Add support for SSI2 and SSI3
2014-12-21 15:23:37 -06:00
Gregory Nutt
b6839f5407
Tiva: Add a configuration setting to better distinguish TM4C123 and 129 families. Reanem tm4c_syscontrol.h to tm4c123_syscontrol.h; rename tm4c129x_syscontrol.h to tm4c129_syscontrol.h
2014-12-20 08:38:11 -06:00
Gregory Nutt
56340ae971
STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review
2014-12-19 14:52:17 -06:00
Gregory Nutt
6194fed86b
Stuff that goes along with the new LTDC README file
2014-12-19 14:14:41 -06:00
Gregory Nutt
e63730e995
stm32f429i-disco: add default platform configuration to test framebuffer support for the ltdc
...
Memory configuration:
The heap start address of memory region 3 starts at 0xD0000000.
The allocated framebuffer of the layers is addressed up to the end of the memory
region 3.
If the layer pixel format changes e.g. from RGB565 to RGB24, than the memory
configuration must be configured too. Currently an easy memory calculation
is missing for that in Kconfig.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 14:08:59 -06:00
Gregory Nutt
78ff2450cb
stm32f429i-disco: initialize ltdc during bootup
...
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 14:05:19 -06:00
Gregory Nutt
9853b62e73
stm32f429i-disco: enable configuration of framebuffer support for the ltdc controller
...
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 14:02:26 -06:00
Gregory Nutt
a5a8349226
stm32f429i-disco: Add support for initializing ltdc framebuffer and the configured lcd display
...
This adds support for initializing of the ltdc controller and the lcd device connected on the stm32f429i-disco. The following methods are provided for the generic fb interface:
- up_fbinitialize
- up_fbgetvplane
- fb_uninitialize
The following methods are provided for the ltdc interface:
- up_ltdcgetlayer
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:54:27 -06:00
Gregory Nutt
bd078141a6
stm32f429i-disco: update board definition for the ili9341 LCD display. This configures all LCD settings for the RGB interface. Also adds a customer LCD display template.
...
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:34:37 -06:00
