sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
28,325 Commits 1 Branch 0 Tags
Commit Graph

34 Commits

Author SHA1 Message Date
Gregory Nutt
48bc77ee6b Update some comments. 2017-02-25 12:40:30 -06:00
David Sidrane
29ab603a66 Kinetis:Add LPUART for use with K66 
Add LPUART made UART5 an uption as the K66 does not have UART5
 2017-02-25 07:02:56 -10:00
David Sidrane
c83af148b1 Kinetis:Add FTM3 to PWM 2017-02-15 13:42:36 -10:00
David Sidrane
a95a6c43d3 Kinetis Support RMII clock source select 
This defined the RMII clock source select bits and allows
  the selection to be made via Kconfig
 2017-02-15 13:42:36 -10:00
David Sidrane
3840c802d1 Kinetis SPI and I2C are 0 based 
The K whole family line has max 4 or each. But the supported
  parts have the maximums listed below:

    K46 and K66    3 SPI SPI0-SPI2
    K46 and K66    4 I2C I2C0-I2C3
 2017-02-13 13:24:47 -10:00
David Sidrane
97ae289f99 Add Kinetis K66 to Kinetis Kconfig 2017-02-07 12:38:28 -10:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
Maciej Skrzypek
bc1826da63 Kinetis: Added CHIP_MK60FN1M0VLQ12 chip 2017-01-13 08:10:03 -06:00
Gregory Nutt
934aded293 arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER 2016-11-29 16:06:48 -06:00
Gregory Nutt
0804286ad3 arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS. 2016-11-19 09:20:01 -06:00
Gregory Nutt
a3b061e54f Kinetis: Add support for I2C2 2016-08-16 10:02:28 -06:00
Gregory Nutt
f40bb14495 Kinetis: Add support for I2C1 2016-08-16 07:21:03 -06:00
Gregory Nutt
59f626313d Changes from review of last PR 2016-07-25 15:16:51 -06:00
Gregory Nutt
5386403476 Rename Kinetis version of CONFIG_GPIO_IRQ to CONFIG_KINETIS_GPIOIRQ 2016-07-22 14:30:37 -06:00
Gregory Nutt
a7d8279714 Kinetis and Freedom-K64F: Remove unused configuration variable; fix some compile issues; SDHC is now enabled in the nsh configuration (but does not work) 2016-07-13 09:56:02 -06:00
Gregory Nutt
10667bd38a Kinetis Ethernet and Freedcom-K64F: PHY address was wrong. Modified driver to try all PHY addresses and then only fail if the driver cannot find a usable PHY address. MDIO pin must have an internal pull-up on the Freedom-K64F. 2016-07-12 14:09:27 -06:00
Gregory Nutt
c8f053de92 Kinetis Ethernet: Add support for the KSZ8081 PHY 2016-07-12 09:59:08 -06:00
Gregory Nutt
91dd3306c8 arch/arm/src/kinetis: Add basic support for the K64 family. Still moving register definition files to the kinetis/chip subdirectory. 2016-07-01 11:24:41 -06:00
kfazz
9e36d42859 Kinetis pwm support, based on kl_ftm driver. 
Initial commit. Compile checked only.
 2016-06-09 13:07:03 -04:00
Gregory Nutt
2a87741e72 Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER 2016-05-25 10:45:01 -06:00
Gregory Nutt
8df80e6615 Kconfigs: All RNG selections also must select ARCH_HAVE_RNG 2016-03-30 07:56:03 -06:00
Andrew Webster
43303a5786 Kinetis: add MK60N512VLL100 support 2016-01-21 19:07:18 -06:00
Gregory Nutt
e5e631e57f include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics. 2015-11-26 12:07:18 -06:00
Gregory Nutt
fb926e7283 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
0742ee3c3e Add support for MK20DN--VLH5 and MK20DX---VLH5. Needed for backward compatible support for Teensy-3.0 2015-06-10 11:45:17 -06:00
Gregory Nutt
f01c04f1a7 Add support for other members of the Kinetis MK20DX---VLH7 family; undate a README 2015-06-09 18:01:32 -06:00
Gregory Nutt
318345fb1d Basic support for the Kinetis K20 architecture. Taken from PX4. This is the work of Jakob Odersky. 2015-05-26 15:03:35 -06:00
Gregory Nutt
6622714c5d Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level 2013-08-10 09:06:53 -06:00
Gregory Nutt
dd556fbded Useless TIOCSERGSTRUCT logic in most serial drivers is not compiled unless CONFIG_DEBUG and CONFIG_SERIAL_TIOCSERGSTRUCT are defined 2013-04-25 15:52:48 -06:00
patacongo
f052fb38a4 twr-k60n512 configurations converted to use the kconfig-frontends tools 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5785 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-25 18:18:04 +00:00
patacongo
0d7b732043 convert Kwikstik K40 configurations to use kconfig-frontends tools 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5784 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-25 17:33:41 +00:00
patacongo
4f469e6316 Reconfigured Shenzhou to use JTAG. Misc Kconfig changes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5118 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-09 15:43:18 +00:00
patacongo
fbaeb32b0f More configuration files 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4588 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-11 02:04:59 +00:00