sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
50,788 Commits 1 Branch 0 Tags 291 MiB
c983aee38a
Commit Graph

5506 Commits

Author SHA1 Message Date
dongjiuzhu1
c983aee38a driver/serial: fix race condition about calling rxflowcontrol in mutli thread 
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
 2023-08-30 14:33:00 +08:00
dongjiuzhu1
ec4f6ecce2 driver/serial: fix error echo about VT100 escape sequence 
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
 2023-08-30 14:26:11 +08:00
Michal Lenc
f9d4a47889 pcf8575: fix compilation warnings 
Just few compile warning fixes in case CONFIG_IOEXPANDER_MULTIPIN is
selected.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-08-29 20:34:12 +08:00
Michal Lenc
b005f844f5 ioexpander: add support for ISO1I813T expander 
This commit adds basic support for electrically isolated 8 bit expander.
The expander communicates with the MCU via SPI interface. Both single
and multiple pin read are supported.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-08-29 17:35:59 +08:00
chao an
b60f01a55b inode/i_private: remove all unnecessary cast for i_private 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-08-29 08:58:07 +02:00
SPRESENSE
f556cb106a drivers/video: Fix an issue isx019 may freeze 
isx019 driver freezes by I2C access in the interrupt context.
This I2C access is intended to stop data output from FPGA.
Delete this I2C access for the following reasons.
- Data output from FPGA does not affect power consumption
- There are no problems in capture restart without data output stop
  since restart is done by image data block first.
 2023-08-29 13:37:01 +08:00
Michal Lenc
fa63ef69c9 ioexpander: add support for ISO1H812G expander 
This commit adds support for galvanic isolated ISO1H812G SPI expander.
Both single pin and multiple pin writes are supported.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-08-29 10:31:40 +08:00
chao an
7aa45305b7 fs/inode: remove all unnecessary check for filep/inode 
Since VFS layer already contains sanity checks, so remove unnecessary lower half checks

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-08-29 09:47:11 +08:00
dulibo1
127bd81674 regulator:check id conflict when register 
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
 2023-08-29 02:59:59 +08:00
Alan Carvalho de Assis
7f62e315c6 bh1750fvi: Fix compilation error 
Error: sensors/bh1750fvi.c:73:16: error: unused function 'bh1750fvi_open' [-Werror,-Wunused-function]
static int     bh1750fvi_open(FAR struct file *filep);
               ^
Error: sensors/bh1750fvi.c:74:16: error: unused function 'bh1750fvi_close' [-Werror,-Wunused-function]
static int     bh1750fvi_close(FAR struct file *filep);
 2023-08-28 21:03:19 +03:00
yinshengkai
02d0762c6e driver/note: fix trace dump: dump failed 
Exceeding the length limit may cause an error when using sched_note_printf

Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-08-29 00:09:10 +08:00
raiden00pl
8665acaffa lsm9ds1.c: fix printf warnings 2023-08-27 10:05:05 +08:00
raiden00pl
7109fd6121 sensors/Kconfig: fix wrong depends on SN_XXX 2023-08-26 20:00:12 +08:00
SPRESENSE
f7400a857d drivers/audio/cxd56: Move cxd56 sources into arch/cxd56xx 
CXD56 audio functions are inside of the CXD56.
So implementation of it should be under arch directory.
 2023-08-26 01:20:32 +08:00
ligd
b743d62703 syslog: remove unsed check 
To simplify the code

Signed-off-by: ligd <liguiding1@xiaomi.com>
 2023-08-25 17:31:31 +08:00
Jiuzhu Dong
904ca21a00 syslog & ramlog: add BOARDIOC_RESET_CAUSE for syslog & ramlog 
cold boot should clear syslog & ramlog buffer

Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
 2023-08-25 17:31:31 +08:00
chengkai
d867c46bbc serial/uart/h5: add bt h5 uart serial driver 
Signed-off-by: chengkai <chengkai@xiaomi.com>
 2023-08-25 17:17:37 +08:00
Michal Lenc
00128ff2fe pwm: fix incorrect documentation for PWMIOC_SETCHARACTERISTICS IOCTL 
Documentation for PWMIOC_SETCHARACTERISTICS ioctl command mentioned
that this command will neither start nor stop the pulsed output. This
however is incorrect as PWMIOC_SETCHARACTERISTICS command leads to
pwm_start() function which starts the pulsed output.

While this might not be the correct behaviour (I would probably welcome
the option to set PWM characteristics without starting the pulsed output)
it is the way the PWM driver is coded for many architectures. Future
enhancement might be to add function pwm_setchar() for example to just
set characteristics without starting the PWM output.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-08-24 01:37:40 +08:00
raiden00pl
a72b8e2fd4 cmake: drivers/segger support 2023-08-22 23:37:08 +08:00
guohao15
d4cebd5d77 mtd:add dhara compatiblity layer 
to support dhara ftl for fatfs

Signed-off-by: guohao15 <guohao15@xiaomi.com>
 2023-08-22 23:16:14 +08:00
xiajizhong
1c860f38e7 cordic API add scale parameter 
Signed-off-by: xiajizhong <xiajizhong@xiaomi.com>
 2023-08-22 12:51:36 +02:00
Zhe Weng
5597b8a9e2 drivers/virtio-net: Add support to offload small IOBs 
TCP receive tested with different IOB_BUFSIZE:
|             | 256B vs 1534B | 512B vs 1534B | 768B vs 1534B |
| :---------: | :-----------: | :-----------: | :-----------: |
|     Non-SMP |     ~85%      |     ~93%      |     ~96%      |
|  armv8a-SMP |     ~66%      |     ~84%      |     ~92%      |
| rv32/64-SMP |     ~52%      |     ~72%      |     ~83%      |

It seems we still get performance penalty on smaller IOBs, and may be
affected more under SMP mode. It may be caused by critical sections in
IOB operations.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-08-22 16:34:21 +09:00
Zhe Weng
318d136320 netdev/upper: Add netpkt_to_iov() interface 
Some driver like virtio-net can offload fragmented IOBs, so an interface
to support this feature is needed.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-08-22 16:34:21 +09:00
Zhe Weng
d44e19d115 mm/iob: Add support for increasing length in iob_update_pktlen 
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-08-22 16:34:21 +09:00
Zhe Weng
2fa68fbddd drivers/virtio-net: Support different LL_GUARDSIZE 
Previously, the CONFIG_NET_LL_GUARDSIZE is fixed to 32 (64-Bit) or
28 (32-Bit), it's a little bit tricky.
Now add support to any value greater than minimal size.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-08-22 16:34:21 +09:00
zhangyuan21
9bccd94fee rndis: Fixing erroneous macros 
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-08-22 01:31:19 +08:00
dongjiuzhu1
38c001a914 drivers/pipes: fix busyloop issue when circbuf is full 
pipecommon_poll always reutrn POLLOUT when the circbuf is full.

Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
 2023-08-22 01:30:17 +08:00
Xiang Xiao
90f8315432 arch: Remove up_netinitialize 
since this api change to xxx_netinitialize

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-08-20 14:33:17 +03:00
Petro Karashchenko
075738cf14 net/ip: print ip addresses using ip4_addrN macro 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-08-19 13:28:21 -03:00
yinshengkai
8fa4f2d61d add the startup process tracepoint 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-08-19 21:50:08 +08:00
yinshengkai
1e164b7f75 note: add noteram crash dump 
Dump all content when a crash occurs

Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-08-19 21:48:56 +08:00
guohao15
2740f377eb ftl: fix ftl_flush will read/erase beyond the end of the partition 
Signed-off-by: guohao15 <guohao15@xiaomi.com>
 2023-08-19 21:47:14 +08:00
rongyichang
917634446e drivers/lcd : add ioctl passthrough for LCD driver 
Some LCD vendors support unit test commands, we should passthrough the ioctl
commands to drivers.

Signed-off-by: rongyichang <rongyichang@xiaomi.com>
 2023-08-19 01:50:41 +08:00
dongjiuzhu1
29ddfd44a0 driver/note: dump irq handler address to trace 
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
 2023-08-19 01:42:17 +08:00
ligd
45c04e9125 syslog_rpmsg: update check method when do flush() 
Signed-off-by: ligd <liguiding1@xiaomi.com>
 2023-08-19 01:35:19 +08:00
zhanghongyu
7b11162b24 rpmsgdev: add tun device ioctl support 
In a multi-core heterogeneous architecture, tun device nodes of protocol
stack core can be accessed by other cores through ioctl

Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
 2023-08-19 01:33:17 +08:00
simbit18
70ab01a20b Fix Kconfig style 
Replace help => ---help---
Remove spaces from Kconfig
Add comments
 2023-08-18 16:36:04 +03:00
xucheng5
417207678e driver/capture : add capture debug, fixed compile warning 
Signed-off-by: xucheng5 <xucheng5@xiaomi.com>
 2023-08-18 09:21:46 +02:00
Takayoshi Koizumi
d5407b16f8 driver/audio/cxd56: Fix code style 
Fix the code pointed out.
 2023-08-18 08:53:04 +02:00
SPRESENSE
035a00e286 driver/audio/cxd56: Support 24bit, 192kHz and 4ch max 
Support CXD56 audio input for 192kHz sampleing rate,
24bit and 4channels.
 2023-08-18 08:53:04 +02:00
xuwenjie
4af8927829 drivers/pty: Support get and set local mode of pty 
Signed-off-by: xuwenjie <xuwenjie1@xiaomi.com>
 2023-08-18 14:30:22 +08:00
Jiuzhu Dong
fa10cf7cdf driver/sensor: update nbuffer to upper state 
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2023-08-18 12:20:50 +08:00
p-zhangliming1
4b2ae15069 nuttx/mtd: Add new functions part_isbad and part_markbad in mtd partition. 
Signed-off-by: p-zhangliming1 <p-zhangliming1@xiaomi.com>
 2023-08-16 23:56:18 +03:00
zhangyuan21
1e7678c58a usbdev: clear configid after class disconnect 
In class disconnect, resetconfig will be performed based on
configid, so configid should be cleared after disconnect.

Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-08-17 01:11:53 +08:00
xuxin19
f2f0d7fbad cmake:fix drivers build block during cmake reforming 
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
 2023-08-16 22:38:52 +08:00
wangyingdong
8f6f601ec1 net/local:Add peek support for pipe and MSG_PEEK support for local socket 
fifo peek example:
struct pipe_peek_s peek_buf;
peek_buf.len = len;
peek_buf.data = buf;
ret = file_ioctl(filep, PIPEIOC_PEEK,(unsigned long)((uintptr_t)&peek_buf));

Signed-off-by: wangyingdong <wangyingdong@xiaomi.com>
 2023-08-15 23:58:45 +08:00
liuhongchao
f9dbeaef86 drivers/input:fix circbuf leak 
Signed-off-by: liuhongchao <liuhongchao@xiaomi.com>
 2023-08-14 20:40:11 +08:00
yinshengkai
b106f032cb drivers/note: add maximum channel number check 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-08-14 13:41:00 +08:00
dulibo1
3591de08c6 fix g_goldfish_gauge_ops init C89 compatible and align style 
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
 2023-08-14 13:40:38 +08:00
jianglianfang
5accd7c146 drivers/video: add Goldfish-FB driver 
the register definition is described here:
https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT

Goldfish-FB driver is to communicate with Goldfish-FB in QEMU, and push the framebuffer data to the emulator for display on the screen.
test: CONFIG_GOLDFISH_FB =1, and run demo=>lvgldemo widgets

Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
 2023-08-13 11:51:30 -03:00