sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,842 Commits 1 Branch 0 Tags 291 MiB
cc75e33816
Commit Graph

32842 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Gregory Nutt
cc75e33816 arch/arm/src/armv-7m/nvic.h: Add definitions needed by up_trigger_irq(). 2018-08-25 10:40:37 -06:00
Xiang Xiao
3eb34186b5 drivers/net/lan91c111.c: Change loopback_out to devif_loopback 2018-08-25 10:25:35 -06:00
Gregory Nutt
f8bfbd58c5 arch/arm/src/armv7-m/up_trigger_irq.c: Add logic to trigger ARMv7-M interrupts and exceptions. 2018-08-25 10:23:21 -06:00
Gregory Nutt
3f1869ea9d Rename CONFIG_ARCH_HAVE_TRIGGER_HOOK to CONFIG_ARCH_HAVE_IRQTRIGGER 2018-08-25 09:10:30 -06:00
Gregory Nutt
5d042b41c3 Rename the file devif_loopbackout.c to devif_loopback.c 2018-08-25 08:36:02 -06:00
Gregory Nutt
9bc951a335 Rename devif_loopback_out to devi_loopback 2018-08-25 08:33:21 -06:00
Gregory Nutt
11a1b2598e Fix some naming convention violations in the last commit. 2018-08-25 08:30:28 -06:00
DisruptiveNL
cd2ced4d9a drivers/sensors and configs/nucleo-l476g: Add support for LSM303AGR and LSM6DSL sensors 2018-08-25 08:19:31 -06:00
Xiang Xiao
c9b24615a6 sched/irq: Monitor the irq execution time. This is very useful for measuring the interrupt latency. 2018-08-25 07:12:21 -06:00
Gregory Nutt
3bf96c8e7e net/arp: Improve arp_find() commit 9774d35010 to reduce the amount and frequency of data copies. 2018-08-25 07:12:21 -06:00
David Sidrane
aa409f46ab Merged in david_s5/nuttx/master_kinetis_i2c_fix (pull request #711) 
kinetis:i2c ensure timeout on bus error

The code had a dead wait on I2C_S_BUSY. Noise on the
   bus would cause the driver to hang.

   Add timeout on invalid states of I2C_S_BUSY to allow
   the upper layers do deal with restart or abort.

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-08-25 12:48:29 +00:00
Gregory Nutt
324e1412ef net/arp: Costmetic update to comments. 2018-08-24 17:57:15 -06:00
Gregory Nutt
9774d35010 net/arp: Make the function arp_find() thread-safe. It now returns a copy of the ARP table entry, rather than a potentially unstable reference to the ARP table entry. 2018-08-24 17:36:08 -06:00
Gregory Nutt
e8270defc9 arch/: Fix an error found in build testing. The protoype of mpu_log2regionfloor() changed; an additional parameter was added. However, none of the calls to mpu_log2regionfloor() were updated to pass the new, additional parameter. 2018-08-24 16:40:37 -06:00
Gregory Nutt
3931eaf015 sched/Kconfig: Fix a warning found in build testing. 2018-08-24 16:14:21 -06:00
Gregory Nutt
38452007a3 sched/irq/irq_dispatch.c: Fix an error found in build testing. 2018-08-24 16:12:31 -06:00
Xiang Xiao
2aa208ccf0 sched/irq/irq_procfs.c: Fix occasional computation error when fracpart >= 1000 2018-08-24 15:16:11 -06:00
zhuguangqing
d38be46655 sched/irq: Add support interrupt chains in NuttX. IRQ chain is very useful in these cases: (1) Multiple hardware connect to the same request line(e.g. PCI), (2) Need multiple driver to support one hardware block (like Linux MFD) 2018-08-24 15:10:23 -06:00
Xiang Xiao
6cb606d42b sched/irq/irq_dispatch.c: Ensure vector never points to NULL since interrupt may happen before irq_initialize() 2018-08-24 15:01:32 -06:00
dongjianli
19e16cb1ba up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined 2018-08-24 14:50:45 -06:00
Xiang Xiao
c0bacb7d89 arch/sim/src/up_netdriver.c: (1) Remove up_comparemac() check for matching MAC address. Let's trust that the tap device just return the packet which belong to us like other real network device hardware. (2) Add network device statistics support. 2018-08-24 14:23:50 -06:00
Xiang Xiao
149748e4ed drivers/net: drivers/net: Add support for Microchip LAN91C111 driver 2018-08-24 11:07:07 -06:00
Xiang Xiao
fc194cf2ec drivers/timers: Add a new method to the struct oneshot_operations_s interface to get the current time from a oneshot timer driver (if it is available from the lower half) 2018-08-24 10:21:29 -06:00
Xiang Xiao
a6c68d233d drivers/timers: Add maxtimeout method to the struct timer_ops_s interface 2018-08-24 10:16:17 -06:00
Xiang Xiao
3af35699b9 include/nuttx/clock.h, sched/sched: Support the CPU load measurement using timer_lowerhalf_s interface 2018-08-24 10:10:57 -06:00
Xiang Xiao
0074afa0ac net/netdev: add devif_loopback_out() to check the loopback case where a packet is being sent to itself. Modify the net driver to call this function in this case. This function will simply re-inject the packet back into the network and the network driver will not put anything on the wire. 2018-08-24 09:21:33 -06:00
Xiang Xiao
f74ddd2a04 net/arp: arp_find() now checks if the target IP belongs to one of the local network devices. 2018-08-24 09:04:29 -06:00
ligd
fb90f821fb include/nuttx/arch.h: Add architecture-specific prototypes for conversions between physical and virtual address. 2018-08-24 08:40:45 -06:00
Xiang Xiao
430bf16f1e Squashed commit of the following: 
include/nuttx/arch.h:  Add prototype for an architecture-specific up_trigger_irq function
    arch/, include/nuttx, sched/sched:  Add the garbage collection hook so each architecture can do custom memory cleanup if necesary.
    arch/Kconfig:  Add configureation CONFIG_ARCH_GNU_NO_WEAKFUNCTIONS to suppress use of weak functions.  Some gnu derived toolchains do not support weak symbols
 2018-08-24 08:30:01 -06:00
dongjianli
0df5e56e20 include/nuttx/arch.h: Add prototype for an architecture-specific up_trigger_irq function 2018-08-24 08:25:06 -06:00
Xiang Xiao
36b46a6a40 arch/ and task/sched: vfork operation needs to allocate and copy the task argument too. Also correction of the address correction cannot depend on the stack pointer since it is not available in all architectures. Rather callculate the offset from the stack allocation pointer 2018-08-24 07:43:00 -06:00
Xiang Xiao
8b63d02309 arch/arm/armv7-m: MPU: mpu_log2regionceil needs take into account the offset too 2018-08-24 07:13:05 -06:00
Xiang Xiao
7a9309370f arm syscalls: svcall/sycall logic needs to get the ucontext argument from R4 instead of stack since all syscall parameters pass from registers in syscall.h 2018-08-24 07:11:18 -06:00
Gregory Nutt
4824b04b44 arch/arm/src/armv6+7-m/up_vectors.c: Fix the type mismatch warning for _ebss 2018-08-24 07:04:51 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Xiang Xiao
467d2a58ea Replace non critical PANIC with DEBUGPANIC to save the code space 2018-08-24 06:21:15 -06:00
Gregory Nutt
e90f0403a6 binfmt/: Mostly cosmetic changes from review of a previous commit. 2018-08-24 06:10:50 -06:00
Gregory Nutt
2722fd8192 tools/nxstyle.c: Add capability to detect multiple blank lines. Single spacing required by the coding standard. Also coding standard fixes to server .c files for problems found during testing nxstyle. 2018-08-24 05:51:44 -06:00
Gregory Nutt
9157422312 include/dsp.h: Add extern C support for use with C++ 2018-08-23 12:54:13 -06:00
anchao
95163b2c59 Squashed commit of the following: 
Author: Xiang Xiao <xiaoxiang@xiaomi.com>

     arch/arm/src/armv7-m:  Implement SYSTICK timer driver

   Author: anchao <anchao@pinecone.net>

     configs/sim/loadable:  Add loadable demo for arch sim
     sched/init: Restore previously reverted option to mount block device for INIT_FILEPATH case
     configs/stm3240g-eval/knxwm: Fix build breakage.

   Author: Gregory Nutt <gnutt@nuttx.org>
     configs:  With recent changes to apps/ all configurations that build applications as modules must now also select CONFIG_APPS_LOADABLE.

   Author: anchao <anchao@pinecone.net>
      configs/sim/loadable:  Add loadable demo for arch sim
       Kconfig and tools/Makefile.unix and : add dynamic application loadable support
 2018-08-23 11:08:22 -06:00
Xiang Xiao
22a44465e4 arch/arm/src/armv7-m: Implement SYSTICK timer driver 2018-08-23 10:09:56 -06:00
xuanlin
2c93467436 pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator. 2018-08-23 09:49:20 -06:00
Xiang Xiao
86eef8ce3a mm/: add mm_heapmember function and reimplement kmm_heapmember base on mm_heapmember since this function is very useful if multiple heaps exist. 2018-08-23 09:38:49 -06:00
Xiang Xiao
377eb30129 binfmt: Add binfmt_initialize(). All binary formats are now registered centrally vs. in board-specific logic. This simplifies the usage of the binfmt subsystem. 2018-08-23 09:09:39 -06:00
Gregory Nutt
0001607f71 arch/arm: (1) Add semihost support for syslog, (2) Add semihost support for HostFS 2018-08-23 08:00:07 -06:00
Xiang Xiao
e2ccce1f2e apps/system/system/system.c: Add 'const' to make function prototype compatible with OpenGroup.org requirement 2018-08-23 06:40:59 -06:00
Gregory Nutt
1f1ead3099 drivers/wireless/ieee80211: Used nxstyle to find coding standard violations, then corrected them. 2018-08-22 17:35:17 -06:00
Xiang Xiao
a465b6f0d4 configs/: Change CONFIG_BOARD_RESET_ON_CRASH to CONFIG_BOARD_RESET_ON_ASSERT, arch/: Implement call to board_reset() if in all implementations of up_assert() when CONFIG_BOARD_RESET_ON_ASSERT=y. 2018-08-22 17:04:39 -06:00
Gregory Nutt
d52561fbef Update NSH documention to describe the optional mode argument to the poweroff and reboot commands. 2018-08-22 17:03:25 -06:00
Gregory Nutt
dbe9b7ffb7 drivers/wireless/ieee80211/bcmf_bdc.c: Trivial check for NULL pointer. 2018-08-22 17:02:23 -06:00