sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
29,968 Commits 1 Branch 0 Tags 291 MiB
cfea8adacb
Commit Graph

10104 Commits

Author SHA1 Message Date
Gregory Nutt
cfea8adacb L should be capitalized in 6LoWPAN 2017-06-18 16:00:08 -06:00
Gregory Nutt
84a75996fb IEEE 802.15.4 Network Driver: Add logic to setup the network mask, update the MAC-based IPv6 addressing when the network is brought up. The idea is that addressing changes are supposed to occur only while the network is down but won't take effect until the network is up again. 2017-06-18 15:26:56 -06:00
Gregory Nutt
50df37931d ieee802.15.4: Missing one name change 2017-06-18 11:29:09 -06:00
Gregory Nutt
2d4ba3ee3f IEEE 802.15.4 MAC: Add list management and prioritization logic that will permit the MAC layer to support bound multiple clients. 2017-06-18 11:00:47 -06:00
Gregory Nutt
8d4439e683 Update some 6loWPAN configurations based on changes to NSH Kconfig 2017-06-17 11:29:25 -06:00
Gregory Nutt
c27cee2a94 configs/sim/sixlowpan: Refresh configuration. 2017-06-17 07:34:35 -06:00
Gregory Nutt
a0722750d8 clicker2-stm32: mrf24j40-6lowpan configuration needs to enabled the ieee 802.15.4 MAC network device as well. 2017-06-16 18:02:46 -06:00
Gregory Nutt
4588226d71 Clicker2-STM32: Enable networking and 6loWPAN in the mrf24j40-6lowpan configuration. Fix a couple of new 6loWPAN compile issues revealed by this new configuration. 2017-06-16 16:47:27 -06:00
Gregory Nutt
1f42ab7b7d Clicker2-stm32: Allow both IEEE 802.15.4 MAC character and network devices to be registered. 2017-06-16 15:40:00 -06:00
Gregory Nutt
ab2028d73e Fix a long line in a README file 2017-06-16 09:55:21 -06:00
Gregory Nutt
c8f6475749 Merge remote-tracking branch 'origin/master' into ieee802154 2017-06-16 09:34:57 -06:00
Gregory Nutt
5245cbc6f5 STM32 SPI/I2S: Back out a bad pin mapping change from 4ab2a3661e. Try to staighten out some I2C3 and SPI3 pin configuration stuff. 2017-06-16 09:34:22 -06:00
Gregory Nutt
389144412c Merge branch 'ieee802154' of bitbucket.org:nuttx/nuttx into ieee802154 2017-06-16 07:53:07 -06:00
Gregory Nutt
777964a0cf Clicker2-STM32: Enable RAMLOG in mrf24j40-6lowpan configuration. Update README. 2017-06-16 07:49:23 -06:00
Gregory Nutt
af25740ca5 Update README: 2017-06-15 16:37:18 -06:00
Gregory Nutt
0878286f71 Merge remote-tracking branch 'origin/master' into ieee802154 2017-06-15 14:29:55 -06:00
Gregory Nutt
cd54a0340f Fix a typo. And typo in Kconfig file is reflect in all defconfig files. 2017-06-15 14:29:09 -06:00
Gregory Nutt
b8e968f191 clicker2-stm32: Add a configuratino that will, eventually, be used for 6loWPAN testing. 2017-06-15 14:26:10 -06:00
Gregory Nutt
150907a9b4 Rename configs/mrf24j40-radio to mrf24j40-mac 2017-06-15 12:30:58 -06:00
Gregory Nutt
535ea4e0f5 Merge remote-tracking branch 'origin/master' into ieee802154 2017-06-15 10:34:38 -06:00
Gregory Nutt
4a88d6a50a Merge branch 'ieee802154' of bitbucket.org:nuttx/nuttx into ieee802154 2017-06-15 10:32:55 -06:00
Gregory Nutt
1bb5a74035 configs/.gitignore: Make sure that any .gdbinit, .project, or .cproject files are ignore so that they are less likely to be included in a patch or PR. 2017-06-15 10:12:02 -06:00
Anthony Merlino
e30501ebd4 wireless/ieee802154: Lots of fixes, cleanup, new functionality. Functional 2017-06-15 12:11:52 -04:00
Gregory Nutt
d8da813562 stm32f103-minimum: Fix compiler error in MCP2415 logic. 2017-06-14 14:54:07 -06:00
Gregory Nutt
78281ef8e0 configs/stm32f103-minimum/mcp2515/defconfig: Enable CONFIG_CAN_TXREADY=y to eliminate a warning. 2017-06-14 10:10:57 -06:00
Gregory Nutt
8ae5450268 pthreads: Move pthread_yield from sched/pthreads to libc/pthreads. it is a simple wrapper for sched_yield and does not belong within the OS. 2017-06-14 07:31:10 -06:00
David Sidrane
611612c6f2 freedom-k66f:Use SPI driver. 
Initalize SPI1 on connector J6. No real use, as of yet.
 2017-06-13 17:46:57 -10:00
David Sidrane
fbea5abef0 freedom-k66f:Refreshed config 2017-06-13 17:46:57 -10:00
raiden00pl
fe7148dff0 nucleo-f334r8: cosmetics 2017-06-11 21:14:48 +02:00
raiden00pl
43e0c28acb nucleo-f334r8: add HRTIM initialization 2017-06-11 20:52:43 +02:00
Gregory Nutt
40f60d6da5 Update to coding standard document and to a README file. 2017-06-11 10:01:14 -06:00
Alan Carvalho de Assis
b7ca90a721 stm32f103-minimum: Use separated read_ops for GPIO interrupt pins 2017-06-11 07:20:18 -06:00
Gregory Nutt
6e0ec04084 Update README 2017-06-10 17:54:16 -06:00
Gregory Nutt
2b8abbb3c6 configs: Add readme for B-L465E-IOT01A Development kit. This port is currently under consideration (but may not actually happen) 2017-06-10 08:58:47 -06:00
Alan Carvalho de Assis
fa2c7a694f stm32f103-minimum: Fix a small BUG when reading from output pin. We need a different read_ops to read from output pin. This patch fixes the issue: 
nsh> gpio -o 0 /dev/gpout1
Driver: /dev/gpout1
  Output pin:    Value=1
  Writing:       Value=0
  Verify:        Value=1

Now:

nsh> gpio -o 0 /dev/gpout1
Driver: /dev/gpout1
  Output pin:    Value=1
  Writing:       Value=0
  Verify:        Value=0
 2017-06-09 15:09:03 -06:00
Gregory Nutt
bf6709b887 configs/: Back out many of the changes in two recent commits: Too many changes from SPIDEV_WIRELESS to SPIDEV_CONTACTLESS. Specifically NRF24L01 should still be SPIDEV_WIRELESS. 2017-06-08 15:34:13 -06:00
Gregory Nutt
44b532e648 configs/: a few more places where SPIDEV_WIRELELSS should be SPIDEV_CONTACTLESS. 2017-06-08 14:42:31 -06:00
Gregory Nutt
30cbb3059f Cosmetic: Removing trailing whitespace at the end of lines. 2017-06-08 13:12:08 -06:00
Alan Carvalho de Assis
04eefd7c8b stm32f103-minimum: dd GPIO device driver example for STM32F103-Minimum. This chang adds the initialization needed by stm32f103-minimum board to support the NuttX GPIO Subsystem. 2017-06-08 11:23:46 -06:00
Nicolas Estibals
fb8cfe857e configs/stm32f103-minumum SPI: SPIDEV_WIRELESS used when this has changed to SPIDEV_CONTACTLESS 2017-06-08 11:15:08 -06:00
David Sidrane
182259921f teensy-3.x:Refreshed config and made board self powered 2017-06-06 14:38:59 -10:00
David Sidrane
04a46d8d35 teensy-3.x:Refreshed config 2017-06-06 14:38:59 -10:00
David Sidrane
ad0cbd3f83 teensy-3.x:Removed call to khci_usbattach 
The call is not need by the driver if CONFIG_USBDEV_BUSPOWERED=y
  The class register will enable the soft connect pull up. The
  khci_usbattach call only set a flag, and that  flag is only tested
  in the class register. On a USB powered device if we are running we
  are attached.
 2017-06-06 14:38:59 -10:00
David Sidrane
7581cad592 teensy-3.x:Refreshed config 2017-06-06 14:38:59 -10:00
David Sidrane
5b07459af1 Freedom-k66f:Refreshed config 2017-06-06 14:38:59 -10:00
David Sidrane
3f4d096707 Kinetis:teensy-3.x Define USBOTG-FS Read from FLASH access in board config 
Allow the board config to define the USBOTG-FS to have Read access to
   FLASH.
 2017-06-06 14:38:59 -10:00
Gregory Nutt
ff2b54a5e0 nucleo-f4x1re User LEDS: Issue #51 reports compilation problems with stm32_userled.c. Reported by Gappi92. 2017-06-01 06:44:24 -06:00
Gregory Nutt
90dda9357e pthread robust mutexes: Fix memmory trashing problem: the main task may also use mutexes; need to check thread type before accessing pthread-specific mutex data structures. Problem noted by Jussi Kivilinna. 2017-05-31 10:55:37 -06:00
Gregory Nutt
dc3a7e54a9 Cosmetic 2017-05-30 11:36:54 -06:00
Gregory Nutt
f86287fd43 PIC32MXMMB: Fix a few copy-paste errors. 2017-05-27 09:23:23 -06:00