The aforementioned functions can/will fail if the C compiler decides
to use the stack for the incoming entrypt/etc. parameters.
Fix this issue by converting the jump to user part into pure assembly,
ensuring the stack is NOT used for the parameters.
When its remote core publishes a message, all subscribed cores will receive the message,
but the local core "stublist" does not update the user's "generation" and "bufferpos" parameters.
Signed-off-by: likun17 <likun17@xiaomi.com>
The original code made the incorrect assumption that the amount of
translation levels is 3, but this is incorrect. The amount of levels is 4
and the amount of levels that are utilized / in use is set dynamically
from the amount of VA bits in use.
The VMSAv8-64 translation system has 4 page table levels in total, ranging
from 0-3. The address environment code assumes only 3 levels, from 1-3 but
this is wrong; the amount of levels _utilized_ depends on the configured
VA size CONFIG_ARM64_VA_BITS. With <= 39 bits 3 levels is enough, while
if the va range is larger, the 4th translation table level is taken into
use dynamically by shifting the base translation table level.
From arm64_mmu.c, where va_bits is the amount of va bits used in address
translations:
(va_bits <= 21) - base level 3
(22 <= va_bits <= 30) - base level 2
(31 <= va_bits <= 39) - base level 1
(40 <= va_bits <= 48) - base level 0
The base level is what is configured as the page directory root. This also
affects the performance of address translations i.e. if the VA range is
smaller, address translations are also faster as the page table walk is
shorter.
This defconfig is an example of the recorded stack and it became
faulty recently after the implementation of the `up_current_regs`
functions. The `noinstrument_function` directive must be used for
preventing it from being looped when instrumentation is enabled.
Also, this commit places `sched/instrument/stack_record.c` in IRAM.
with other functionalities removed.
reason:
by doing this we can reduce context switch time,
When we exit from an interrupt handler, we directly use tcb->xcp.regs
before
text data bss dec hex filename
138805 337 24256 163398 27e46 nuttx
after
text data bss dec hex filename
138499 337 24240 163076 27d04 nuttx
szie change -322
Signed-off-by: hujun5 <hujun5@xiaomi.com>
After the ap core subscribes to the 25hz batch 120ms data of the sensor core, it switches
to the cp core and subscribes to the 50hz batch 120ms sensor core data. At this time,
the data subscribed by the AP will be abnormally lost (12.5hz). Mainly because ap
subscribes to sensor core data earlier than cp. The subscription of cp will be broadcast
to the ap core at the same time, and the corresponding "path" already exists
under "/dev/uorb" of ap. Thus the ap will create a "stub".
There are some restrictions on the creation of "stub" to avoid this situation.
Signed-off-by: likun17 <likun17@xiaomi.com>
This change adds a specifier to github lables created with "new issue":
- for labels related to architecture specifier is "Arch: xxx"
- for labels related to issue type specifier is "Type: xxx"
- for labels related to host OS type specifier is "OS: xxx"
- for labels related to issue area type specifier is "Area: xxx"
the detailed warning info are:
CC: syslog/vsyslog.c "pthread/pthread_create.c", line 443: warning #1931-D: operand of sizeof is
not a type, variable, or dereferenced pointer expression
ptcb->cmn.timeslice = MSEC2TICK(CONFIG_RR_INTERVAL);
^
CC: dirent/lib_closedir.c "sched/sched_profil.c", line 81: warning #1931-D: operand of sizeof is not a
type, variable, or dereferenced pointer expression
wd_start(&prof->timer, PROFTICK, profil_timer_handler, arg);
^
"sched/sched_profil.c", line 142: warning #1931-D: operand of sizeof is not a
type, variable, or dereferenced pointer expression
wd_start(&prof->timer, PROFTICK, profil_timer_handler, (wdparm_t)prof);
^
CC: common/arm_modifyreg8.c "sched/sched_setscheduler.c", line 165: warning #1931-D: operand of sizeof is
not a type, variable, or dereferenced pointer expression
tcb->timeslice = MSEC2TICK(CONFIG_RR_INTERVAL);
^
CC: misc/lib_utsname.c "sched/sched_unlock.c", line 275: warning #1931-D: operand of sizeof is not a
type, variable, or dereferenced pointer expression
rtcb->timeslice = MSEC2TICK(CONFIG_RR_INTERVAL);
^
"sched/sched_roundrobin.c", line 119: warning #1931-D: operand of sizeof is
not a type, variable, or dereferenced pointer expression
tcb->timeslice = MSEC2TICK(CONFIG_RR_INTERVAL);
^
CC: armv7-m/arm_fpuconfig.c cxarm: Error: No files. Try -help.
CC: misc/lib_crc8ccitt.c cxarm: Error: No files. Try -help.
cxarm: Error: No files. Try -help.
CC: getprime_main.c cxarm: Error: No files. Try -help.
cxarm: Error: No files. Try -help.
CC: misc/lib_log2ceil.c cxarm: Error: No files. Try -help.
CC: task/task_start.c "task/task_setup.c", line 423: warning #1931-D: operand of sizeof is not a
type, variable, or dereferenced pointer expression
tcb->timeslice = MSEC2TICK(CONFIG_RR_INTERVAL);
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
1. Similar to asan, supports single byte out of bounds detection
2. Fix the script to address the issue of not supporting the big end
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Since the size of the shadow area will change during the script merging of global variables, it will lead to unpredictable number of links. After fixing, only three links are required.
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
1. Tested on QEMU, the two sockets were basically the same, and their performance was not affected. The size of the generated bin file was also the same
2. Extract global detection as a separate file, both types of Kasan support global variable out of bounds detection simultaneously
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
1. Modify the Kasan global variable script to support array storage of region addresses
2. Due to the lack of formatting in the previous attempt, a formatting script was created
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
unsigned_compare: This greater-than-or-equal-to-zero comparison without a signed value is always true. ndx >= 0U
Signed-off-by: Shoukui Zhang <zhangshoukui@xiaomi.com>
Log:
Untracked files:
(use "git add <file>..." to include in what will be committed)
libs/libc/gnssutils/db46128e73cee26d6a6eb0482dcba544ee1ea9f5.zip
nothing added to commit but untracked files present (use "git add" to track)
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
The simple improvement is designed to speed up compilation and reduce download errors on github and local.
Added a folder nxtmpdir for storing third-party packages
nuttxworkspace
|
|- nuttx
|- apps
|- nxtmpdir
tools/Unix.mk:
added export NXTMPDIR := $(WSDIR)/nxtmpdir
tools/configure.sh:
added option -S creates the nxtmpdir folder for third-party packages.
tools/Config.mk:
added macro
CLONE - Git clone repository.
CHECK_COMMITSHA - Check if the branch contains the commit SHA-1.
tools/testbuild.sh:
added option -S
For now I added in the folder this package
ESP_HAL_3RDPARTY_URL = https://github.com/espressif/esp-hal-3rdparty.git
ARCH
arch/xtensa/src/esp32/Make.defs
arch/xtensa/src/esp32s2/Make.defs
arch/xtensa/src/esp32s3/Make.defs
arch/risc-v/src/common/espressif/Make.defs
arch/risc-v/src/esp32c3-legacy/Make.defs
but you can also add other packages (maybe also of apps)
Because kconfiglib recognizes MODULE configuration but not modules attributes,
and kconfig-frontend is compatible with the latest modules attributes of Linux,
we can only use the old version to use MODULE configuration plus options modules to be compatible with both.
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
Error: mmcsd/mmcsd_sdio.c:1419:12: error: 'mmcsd_setblockcount' defined
but not used [-Werror=unused-function]
1172 1419 | static int mmcsd_setblockcount(FAR struct mmcsd_state_s
*priv,
Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
CC: obstack/lib_obstack_printf.c "mmap/fs_rammap.c", line 126: warning #188-D: enumerated type mixed with
another type
enum mm_map_type_e type = (uintptr_t)entry->priv.p & 3;
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
maintains the same semantics as Kernel’s module build
and compatible with Kconfiglib implementation.
The problem of kconfiglib not being able to use tri-states is this:
linux is here torvalds/linux@6dd85ff
The module option is extracted from one of the triate three states into a MODULE keyword.
Kconfiglib supports the default implementation of module to be MODULE for compatibility with the linux kernel, and triate degenerates into bool two states
Refer to this code: 061e71f7d7/kconfiglib.py (L4274-L4284)
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
resson:
using percpu storage for g_current_regs or leveraging interrupt status
registers to determine if code is running within an interrupt context can enhance performance.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
