1. Tested on QEMU, the two sockets were basically the same, and their performance was not affected. The size of the generated bin file was also the same
2. Extract global detection as a separate file, both types of Kasan support global variable out of bounds detection simultaneously
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
maintains the same semantics as Kernel’s module build
and compatible with Kconfiglib implementation.
The problem of kconfiglib not being able to use tri-states is this:
linux is here torvalds/linux@6dd85ff
The module option is extracted from one of the triate three states into a MODULE keyword.
Kconfiglib supports the default implementation of module to be MODULE for compatibility with the linux kernel, and triate degenerates into bool two states
Refer to this code: 061e71f7d7/kconfiglib.py (L4274-L4284)
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
sphinx recommends myst-parser for markdown conversion:
https://www.sphinx-doc.org/en/master/usage/markdown.html
m2r2 is not supported for Python versions >= 3.12 so
we can't build Documentation for example on latest Arch Linux
by the way myst-parser detected a bad link to SECURITY.md that is now fixed
boards/xtensa/esp32s3/esp32s3-devkit|esp32s3-korvo-2/configs/sdmmc/defconfig: defconfig for sdmmc support
Add description for sdmmc support on esp32s3 in the board specific documentation.
Add defconfig for esp32s3-devkit with external adapter and emmc module.
Add defconfig for esp32s3-korvo-2 with SD slot enabled.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Events groups are synchronization primitives that allow tasks to wait
for multiple conditions to be met before proceeding. They are particularly
useful in scenarios where a task needs to wait for several events to occur
simultaneously.
Signed-off-by: chao an <anchao@lixiang.com>
We can send and receive data through device files
nuttx: /dev/cdc-wdm2
linux: /dev/cdc-wdm1
The number suffix depends on the actual situation.
And send and receive messages through network cards.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
add a documented description of the cdcncm device module, including
execution steps and associated outputs
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
arch/xtensa/src/esp32s3/hardware/esp32s3_sdmmc.h|esp32s3_soc.h,
boards/xtensa/esp32s3/common/include/esp32s3_board_sdmmc.h,
boards/xtensa/esp32s3/common/src/Make.defs|esp32s3_board_sdmmc.c,
boards/xtensa/esp32s3/esp32s3-devkit/src/esp32s3_bringup.c: add SD/mmc driver
Support 1-bit bus width and 4-bit bus width. Support eMMC high speed SDR mode.
Support transfer data with DMA. Support SD clock frequency up to 40MHZ.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
This renames a few RV32 configs to follow the convention that names w/o
numbers are for RV32, so that to be in line with majority RV32 configs.
As a result, we have: `nsh` vs `nsh64`, `knsh` vs `knsh64`, `pnsh`
vs `pnsh64`,`flats` vs `flats64`, `nsbi` vs `nsbi64`, `libcxx` vs
`libcxx64` etc. This helps us pick the right config name w/o checking
file contents.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Most developers start learning Nuttx from sim/nsh, but the login experience is very bad,
they don't know where to get the username and password, this commit will remove the
limitation of sim/nsh login, and add sim/login configuration to ensure the feature of
NSH_CONSOLE_LOGIN is verified.
Signed-off-by: chao an <anchao@lixiang.com>
This PR adds a new Build Config `rv-virt:leds64_rust` that builds the Rust App `leds_rust` for QEMU RISC-V 64-bit. The build requires the [Rust Target `riscv64gc-unknown-none-elf`](https://github.com/apache/nuttx/pull/12858):
```bash
rustup target add riscv64gc-unknown-none-elf
```
New Files:
`boards/risc-v/qemu-rv/rv-virt/configs/leds64_rust/defconfig`: Add new Build Config `rv-virt:leds64_rust`
Updated Docs:
`applications/examples/leds_rust/index.rst`: Add `leds_rust` example app
`platforms/risc-v/qemu-rv/boards/rv-virt/index.rst`: Add `rv-virt:leds64_rust` config
