Gregory Nutt
b5c1dd09f5
Syslog: Need inclusion of errno.h for fix building with CONFIG_SYSLOG_TIMESTMAP=y
2017-05-11 07:15:57 -06:00
Jussi Kivilinna
ba933efd9e
When syslog message has addition characters after last new-line. With buffering those now get lost as vsyslog does not flush output after lib_sprintf. Additional trailing characters could be ANSI escape sequence to reset state that message setups. For example, macro here uses colors and resets state after actual message (including '\n'):
...
With flushing added to vsyslog, then there is problem that next syslog line might come from other task before reset sequence, causing wrong line getting color. This could be avoided by not flushing on '\n' but only if IOB is full and/or at end of vsyslog. Would this make sense?
2017-05-11 07:11:35 -06:00
Gregory Nutt
3091050963
STM32L4: Review of last PR + Move separate stm32l4_flash.h; move hardware-specific definitions to chip/stm32l4_flash.h
2017-05-11 06:58:39 -06:00
Juha Niskanen
1f6970ea2f
Merged in juniskane/nuttx_stm32l4/stm32l4_flash_pr (pull request #364 )
...
STM32L4: add internal flash write support
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-11 12:48:59 +00:00
Juha Niskanen
c74a51f789
STM32L4: add internal flash write support
2017-05-11 14:35:27 +03:00
Gregory Nutt
573d3ff87e
Merge branch 'syslog'
2017-05-10 17:42:22 -06:00
Gregory Nutt
d3b9f5b37f
Syslog buffering: Use IOBs to buffer data, not an on-stack buffer
2017-05-10 17:36:08 -06:00
Gregory Nutt
d8a83f16be
Syslog buffering: Various corrections from early debug
2017-05-10 16:13:21 -06:00
Gregory Nutt
00075acada
Merge branch 'syslog' of https://bitbucket.org/nuttx/nuttx into syslog
2017-05-10 15:04:57 -06:00
Gregory Nutt
20727d17c3
SYSLOG: Add option to buffer SYSLOG output to avoid interleaving.
2017-05-10 14:42:43 -06:00
Floxx
277f4b83b0
Merged in floxx/nuttx (pull request #363 )
...
Moved LIS3DSH from the I2C-dependent block to the SPI-block to make Make.defs consistent with the driver (SPI only) and drivers/sensors/Kconfig.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-10 18:57:02 +00:00
Floxx
c2096f17d6
Moved LIS3DSH from the I2C-dependent block to the SPI-block to make Make.defs consistent with the driver (SPI only) and drivers/sensors/Kconfig.
2017-05-10 20:18:48 +02:00
Juha Niskanen
4f18b40429
mtd/config: erase block between block read and write
2017-05-10 08:25:39 -06:00
Stefan Kolb
591f35be87
I discovered a problem in the file drivers/serial/serial.c concerning the function uart_close(…). In the case that a serial device is opened with the flag O_NONBLOCK the function uart_close(…) blocks until all data in the buffer is transmitted. The function close(…) called on an handle opened with O_NONBLOCK should not block. The problem occurred with a CDC/ACM device.
2017-05-10 07:59:58 -06:00
Gregory Nutt
5b2ad3719c
Merged ieee802154 into master
2017-05-09 18:38:47 -06:00
Anthony Merlino
51f455af74
Merged in merlin17/nuttx/ieee802154 (pull request #362 )
...
wireless/ieee802154: Brings closer to Nuttx coding style
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-10 00:37:30 +00:00
Anthony Merlino
07c47b0dde
wireless/ieee802154: Starts implementing START.request primitive
2017-05-09 17:22:30 -04:00
Anthony Merlino
806dcd9a47
wireless/ieee802154: Brings closer to Nuttx coding style
2017-05-09 17:20:57 -04:00
Anthony Merlino
1186cd4e56
wireless/ieee802154: Fixes missing handle of read/write being able to be interrupted
2017-05-09 17:20:57 -04:00
Gregory Nutt
de6bffe713
Update some README files
2017-05-09 11:32:44 -06:00
Juha Niskanen
e04ea9e3e3
Merged in juniskane/nuttx_stm32l4/stm32l4_dbgmcu_pr (pull request #361 )
...
STM32L4: add dbgmcu header files
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-09 17:06:32 +00:00
Gregory Nutt
3d73a04259
Merged l432kc into master
2017-05-09 11:03:42 -06:00
Gregory Nutt
2043e1a114
IOBs: Move from driver/iob to a better location in mm/iob
2017-05-09 07:35:30 -06:00
Juha Niskanen
ce1ad33289
STM32L4: add dbgmcu header files
2017-05-09 14:13:51 +03:00
Sebastien Lorquet
d591d3ac4e
Restore settings for UARTs 4 and 5
2017-05-09 11:38:14 +02:00
Sebastien Lorquet
5204f19e4f
fix typo found by Juha during review
2017-05-09 11:32:16 +02:00
Sebastien Lorquet
ce4c18afe4
More unbuilt stm32 -> stm32l4 changes
2017-05-09 11:15:08 +02:00
Sebastien Lorquet
8c0a70e25c
Typo
2017-05-09 11:09:02 +02:00
Sebastien Lorquet
565c952077
Update defconfig, fix nucleo-32 uart pinout
2017-05-09 11:00:56 +02:00
Sebastien Lorquet
c1cf1269c7
Adapt stm32l43x pin definitions
2017-05-09 10:58:04 +02:00
Sebastien Lorquet
14831a18c6
cleanup all external peripherals
2017-05-09 10:01:26 +02:00
Sebastien Lorquet
b2bb795520
Final fixes to get the nucleo-l432kc config build. execution not tested yet
2017-05-09 09:00:37 +02:00
Sebastien Lorquet
ff4f5fdba2
Merge branch 'master' into l432kc
2017-05-09 08:42:13 +02:00
David Sidrane
407fed41ef
Merged in david_s5/nuttx-17/david_s5/removed-stray-paren-1494284129185 (pull request #359 )
...
removed stray paren.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-09 05:18:08 +00:00
David Sidrane
014b69e120
removed stray paren.
2017-05-08 22:56:05 +00:00
Gregory Nutt
3ab89d20b3
Merge branch 'ieee802154'
2017-05-08 14:35:26 -06:00
Gregory Nutt
d5d96a6efe
Merge remote-tracking branch 'origin/master' into ieee802154
2017-05-08 14:35:00 -06:00
David Sidrane
8406b40baa
Merged in david_s5/nuttx-16/david_s5/stm32serial-dma-buffer-round-off-not-up-1494258804216 (pull request #357 )
...
stm32:Serial DMA buffer round off not up
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-08 20:32:44 +00:00
Anthony Merlino
933c6c7cda
Merged in merlin17/nuttx/ieee802154 (pull request #358 )
...
wireless/ieee802154: Completes basic receive functionality
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-08 20:29:30 +00:00
Anthony Merlino
3fa8e32e36
wireless/ieee802154: MRF24J40: Finishes receive functionality, supports promicuous mode, and rxonidle attributes
2017-05-08 16:23:13 -04:00
Anthony Merlino
bbb85332fd
wireless/ieee802154: Finishes MAC char driver read functionality
2017-05-08 16:23:13 -04:00
Anthony Merlino
2da6f71e84
wireless/ieee802154: Finishes MAC processing of received data frame
2017-05-08 16:23:13 -04:00
Anthony Merlino
2ea6bb4dc1
wireless/ieee802154: Moves ind allocator from mac802154.h to ieee802154_mac.h
2017-05-08 16:23:13 -04:00
Alan Carvalho de Assis
13f1ba03d5
Photon: Add README file
2017-05-08 13:14:21 -06:00
Gregory Nutt
aa11d637a8
STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point.
2017-05-08 12:33:15 -06:00
Gregory Nutt
18eaf52e35
6loWPAN: packet meta data does not need to be a global variable
2017-05-08 10:56:35 -06:00
David Sidrane
546e7acb99
stm32:Serial DMA buffer round off not up
2017-05-08 15:54:03 +00:00
Gregory Nutt
b0b0c7ac49
IEEE 802.15.4 network driver. Remove support for multicast address filtering; doesn't work that way on an IEEE 802.15.4 network
2017-05-08 08:34:21 -06:00
Gregory Nutt
c64983dbeb
Merged david_s5/stm32_serialc-edited-online-with-bitbuck-1494214953115 into master
2017-05-07 22:12:23 -06:00
David Sidrane
b8ef079951
stm32:stm32_serial Forgot the -1 on mask
2017-05-08 03:43:36 +00:00
