Gregory Nutt
|
3583f8c1dc
|
STM32 F7: Add more configuration selections
|
2015-07-16 18:30:40 -06:00 |
|
Gregory Nutt
|
05676a233c
|
STM32 F7: Add pin multiplexing definitions
|
2015-07-16 16:31:02 -06:00 |
|
Gregory Nutt
|
d8915e9dc6
|
Add include/chip.h definitions and configuration support for the STM32 F7
|
2015-07-16 08:47:25 -06:00 |
|
Gregory Nutt
|
eb64a6c238
|
Add STM32 F7 memory map header file
|
2015-07-15 16:24:03 -06:00 |
|
Gregory Nutt
|
2bdca23c92
|
STM32F7: Bring over a couple more Cortex-M7 files from SAMV7
|
2015-07-15 14:51:41 -06:00 |
|
Gregory Nutt
|
be16a06857
|
Create a src directory for the STM32F7 (not much in it yet)
|
2015-07-15 14:32:28 -06:00 |
|
Gregory Nutt
|
1ed5f5a3ed
|
STM32: Move STM32F42xxx IRQ definitions out of stm32f40xxx_irq.h into their own stm32f42xxx_irq.h header file
|
2015-07-15 13:52:20 -06:00 |
|
Gregory Nutt
|
629b37deec
|
STM32: Fix a minor error in new STMF42* header files
|
2015-07-15 13:21:39 -06:00 |
|
Gregory Nutt
|
abbfbb0716
|
STM32: Move STM32F42xxx vector definitions out of stm32f40xxx_vector.h into their own stm32f42xxx_vector.h header file
|
2015-07-15 13:02:55 -06:00 |
|
Gregory Nutt
|
0d0bbafbc5
|
STM32: Move STM32F42xxx SYSCFG definitions out of stm32f40xxx_syscfg.h into their own stm32f42xxx_syscfg.h header file
|
2015-07-15 12:54:15 -06:00 |
|
Gregory Nutt
|
7666fde938
|
STM32: Move STM32F42xxx RCC definitions out of stm32f40xxx_rcc.h into their own stm32f42xxx_rcc.h header file
|
2015-07-15 12:50:04 -06:00 |
|
Gregory Nutt
|
987c010c1f
|
STM32: Move STM32F42xxx DMA definitions out of stm32f40xxx_dma.h into their own stm32f42xxx_dma.h header file
|
2015-07-15 12:38:33 -06:00 |
|
Gregory Nutt
|
1d7789caa6
|
STM32: Move STM32F42xxx pinmap definitions out of stm32f40xxx_pinmap.h into their own stm32f42xxx pinmap.h header file
|
2015-07-15 12:28:45 -06:00 |
|
Gregory Nutt
|
3efe60bb6d
|
STM32 F7: Add interrupt vector definitions
|
2015-07-15 10:54:03 -06:00 |
|
Alan Carvalho de Assis
|
3f68755997
|
SAML21" Fix small typo. It should be 2-Wire I2C instead of 1-Wire. From Alan Carvalho de Assis.
|
2015-07-12 12:17:42 -06:00 |
|
Alan Carvalho de Assis
|
82fd1536a6
|
AMDL: Add support to Peripheral as Output with Read back. From Alan Carvalho de Assis.
|
2015-07-12 09:23:40 -06:00 |
|
Gregory Nutt
|
1f5e16dc95
|
Fix some warnings/errors detected by nuttx/tools/testbuilds.sh
|
2015-07-10 18:41:26 -06:00 |
|
Janne Rosberg
|
3fdfae16b7
|
samdl/sam_usb.h: fix USBDEV_CTRLB_SPDCONF defines Datasheet 03-2015 and 06-2015 is wrong. These defines are correct verified with analyser and also same values are used on Atmel xdk-asf-3.24.2 sources. From Janne Rosberg.
|
2015-07-10 15:23:41 -06:00 |
|
Janne Rosberg
|
02979feb7b
|
samdl/saml_usb.h: fix wrong EP offset calculation. From Janne Rosberg
|
2015-07-10 15:21:37 -06:00 |
|
Janne Rosberg
|
b32d747212
|
Fix some typos. From Janne Rosberg
|
2015-07-10 15:19:24 -06:00 |
|
Janne Rosberg
|
d6a51360f1
|
samdl: fix USBDEV_PKTSIZE_BCNT size. From Janne Rosberg
|
2015-07-10 15:15:55 -06:00 |
|
Alessandro Temil
|
d4cd35af5f
|
More changes to LPC3450 pin configuration: The hardware ETM pins will not toggle unless the SLEW FAST bit is set. From Alessandro Temil.
|
2015-07-09 13:36:22 -06:00 |
|
Alessandro Temil
|
d687bedf36
|
Correct some LPC4350 GPIO pin configurations. From Alessandro Temil
|
2015-07-09 12:09:00 -06:00 |
|
Gregory Nutt
|
56e4189a73
|
SAMD21: Correct some GCLK ID definitions for SERCOM
|
2015-07-06 09:26:49 -06:00 |
|
Gregory Nutt
|
ef5531b30b
|
SAMD21: Last fix to header files caused a compile problem because logic used a value which is no longer available for the SAMD21
|
2015-07-04 13:18:30 -06:00 |
|
Gregory Nutt
|
724c1eacaa
|
Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M
|
2015-07-04 10:39:24 -06:00 |
|
Gregory Nutt
|
36ddd9f691
|
Simulatin: Save the intial terminal mode and restore this before terminating. Otherwise, the NSH shutdown command leaves the console in raw mode
|
2015-07-04 08:43:10 -06:00 |
|
Gregory Nutt
|
749907cbbe
|
sim configuration: Add support for board_app_initialize() which is needed when CONFIG_LIB_BOARDCTL=y
|
2015-07-04 08:16:45 -06:00 |
|
Gregory Nutt
|
8db3a7a13e
|
Add a board_app_initilize() stub function needed by the simulatin when CONFIG_LIB_BOARDCTL=y
|
2015-07-04 07:35:14 -06:00 |
|
Gregory Nutt
|
37e681f89a
|
Implementment board_power_off() for the simulation platform.
|
2015-07-04 07:22:38 -06:00 |
|
Gregory Nutt
|
2e5bef56f2
|
SAMD20/1: Fix some typos found by inspecting header files
|
2015-07-04 07:19:52 -06:00 |
|
Gregory Nutt
|
6129df90d6
|
PIC32 USB device: Fix some backward conditional compilation; fix some warnings
|
2015-07-03 14:37:46 -06:00 |
|
Gregory Nutt
|
35bd9756ff
|
PIC32 SPI: Fix some backward conditional compilation
|
2015-07-03 14:36:56 -06:00 |
|
Gregory Nutt
|
e7177afca4
|
MIPS32 header: Missing comma in prototype. How did that happen
|
2015-07-03 14:36:19 -06:00 |
|
Gregory Nutt
|
b8976adfb3
|
SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet
|
2015-07-03 09:33:52 -06:00 |
|
Gregory Nutt
|
797aa0a138
|
Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF
|
2015-07-03 06:53:51 -06:00 |
|
Gregory Nutt
|
004c076985
|
Correct some issues introduced in the last commit
|
2015-07-02 17:54:05 -06:00 |
|
Gregory Nutt
|
c3290fdabd
|
Modify board_power_off() so that is is called only via boardctl()
|
2015-07-02 17:09:54 -06:00 |
|
Gregory Nutt
|
19320d157a
|
Move prototype of board_power_off() to include/nuttx/board.h where it belongs
|
2015-07-02 16:25:31 -06:00 |
|
Gregory Nutt
|
51df91e93d
|
STM32 RTCC: Eliminate a warning when ALARM support is enabled
|
2015-07-02 15:02:59 -06:00 |
|
Gregory Nutt
|
1839d132f0
|
Add a dummy arch_invalidate_icache because for symmetry in the naming of cache operations
|
2015-07-02 11:13:23 -06:00 |
|
Gregory Nutt
|
46fec91b12
|
Remove a warning
|
2015-07-01 18:25:13 -06:00 |
|
Gregory Nutt
|
6df1d2823f
|
Fix misc. compilation error/warning detected by tools/testbuild.sh
|
2015-07-01 14:33:37 -06:00 |
|
Gregory Nutt
|
dbc5f910fc
|
Fix some typos in header files
|
2015-07-01 11:45:08 -06:00 |
|
Gregory Nutt
|
c73745bede
|
lpc214x USB device: Fix a warning
|
2015-07-01 10:25:14 -06:00 |
|
Gregory Nutt
|
d20dbf5054
|
LPC17xx: Fix a warning about an unused local variable
|
2015-07-01 09:36:39 -06:00 |
|
Gregory Nutt
|
92f9876f75
|
Fix a Cortex-A compilation error in the vfork() logic when system calls are enabled in modes other than CONFIG_BUILD_KERNEL.
|
2015-07-01 08:34:51 -06:00 |
|
Gregory Nutt
|
77285beeca
|
DM320: GIO header uses get/putreg functions and so should include up_arch.h
|
2015-07-01 08:01:49 -06:00 |
|
Gregory Nutt
|
a1676a177d
|
arch/arm/src/sama5/sam_ehci.c: Fix some bad conditional compilation that left a function undefined if CONFIG_USBHOST_ASYNCH is not selected.
|
2015-07-01 07:04:02 -06:00 |
|
Alan Carvalho de Assis
|
928c88a5f6
|
Port some per-process stack dumping logic from ARMv7-M to ARMv6-M. From Alan Carvalho de Assis
|
2015-06-30 11:42:48 -06:00 |
|