sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,004 Commits 1 Branch 0 Tags 291 MiB
db3b507a41
Commit Graph

45 Commits

Author SHA1 Message Date
Gregory Nutt
cafb527262 configs/flipnclick-sam3x: Using JTAG (vs. Bossac) I was finally able to load code and verify the basic NSH configuration. Updated READMEs. Also switched to USART0 (vs UART0) for the serial console because I was not getting bi-directional communication on the VCOM. 2018-01-24 08:52:40 -06:00
Gregory Nutt
c867d42018 arch/arm/src/lpc54xx: Add support for card detect and write protect to SDMMC driver. configs/lpcxpresso-lpc54628: Add logic to bring up SDMMC. 2017-12-20 10:52:05 -06:00
Gregory Nutt
a1e250697c configs/*/include; Remove prototype of xyz_boardinitialize() from board.h files. The authorative prototype is in arch/arm/src/xyz/xyz_start.h 2017-12-16 20:47:44 -06:00
Gregory Nutt
cccc86da09 This change adds support for semi-standard IPPROTO_ICMP AF_INET datagram sockets. This replaces the old ad hoc, nonstandard way of implementing ping with a more standard, socket interface. 
Squashed commit of the following:

    net/icmp:  Finishes off icmp_recvfrom().
    net/icmp:  Add readahead support for IPPROTO_ICMP sockets.
    net/icmp:  Add poll() support for IPPROTO_ICMP sockets.
    net/icmp:  Add a connection structure for IPPROTO_ICMP sockets.
    net/icmp:  Implements sendto for the IPPROTO_ICMP socket.
    net/icmp:  Move icmp_sendto() and icmp_recvfrom() to separate files.  They are likely to be complex (when they are implemented).
    net/icmp:  Hook IPPROTO_ICMP sockets into network.  Fix some naming collisions.  Still missing basic ICMP send/receive logic.
    configs: apps/system/ping current need poll() enabled.
    configs: All defconfig files that use to enable low-level support must now enabled CONFIG_SYSTEM_PING.
    net/icmp:  Adds basic build framework to support IPPROTO_ICMP sockets.
 2017-10-23 08:45:12 -06:00
Gregory Nutt
b750df8f46 Removes last of duplicat Make.defs files. 2017-07-11 09:57:57 -06:00
Gregory Nutt
771cbc8e3a Partial conversion of defconfig files to compressed format 2017-07-09 18:24:03 -06:00
Gregory Nutt
a469f0ef04 Documentation/: Remove dangling space at the end of lines. 2017-06-28 13:27:10 -06:00
Gregory Nutt
cd54a0340f Fix a typo. And typo in Kconfig file is reflect in all defconfig files. 2017-06-15 14:29:09 -06:00
David Sidrane
611612c6f2 freedom-k66f:Use SPI driver. 
Initalize SPI1 on connector J6. No real use, as of yet.
 2017-06-13 17:46:57 -10:00
David Sidrane
fbea5abef0 freedom-k66f:Refreshed config 2017-06-13 17:46:57 -10:00
David Sidrane
5b07459af1 Freedom-k66f:Refreshed config 2017-06-06 14:38:59 -10:00
Gregory Nutt
b0fda33e13 Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR 2017-05-13 16:01:38 -06:00
Gregory Nutt
6e4918c557 Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU 2017-05-13 13:28:15 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Sebastien Lorquet
35b3abc6b2 kinetis boards 2017-04-28 18:26:39 +02:00
Gregory Nutt
9aac1dd44d configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files. 2017-04-26 10:12:13 -06:00
Gregory Nutt
1620ff05f4 Remove all setenv.sh files. 2017-04-26 07:49:37 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
bcc6b61fc1 Move include/nuttx/net/iob.h to include/drivers/iob.h; rename CONFIG_NET_IOB to CONFIG_DRIVERS_IOB 2017-04-20 14:53:30 -06:00
Gregory Nutt
77f980e676 Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set. 2017-04-09 14:44:49 -06:00
Gregory Nutt
f9e402018b Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported. 2017-04-09 07:22:49 -06:00
Gregory Nutt
c071e2a30c Make sure that CONFIG_PTHREAD_MUTEX_ROBUST=y is selected every configuration that enabled pthreads. 2017-03-27 09:21:03 -06:00
Gregory Nutt
b07d3fc305 Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES 2017-03-27 09:08:14 -06:00
Gregory Nutt
b808084e57 Move wireless IOCTLs from include/nuttx/net/ioctl to include/nuttx/wireless/wireless.h. Add some linux compatible structures to use with the IOCTL commands. 2017-03-13 09:51:31 -06:00
Gregory Nutt
c428661e18 apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS. Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support. 2017-03-09 15:39:28 -06:00
Gregory Nutt
d0813aa0c5 Refresh all ARM configurations 2017-03-09 10:23:41 -06:00
David Sidrane
2700fd9e81 Kinetis:Allow Board to add Pullups on SDHC lines 2017-03-09 05:30:02 -10:00
Gregory Nutt
f8ef544c34 K66 Buttons: Missing definition of 'ret' 2017-03-03 15:07:38 -06:00
Gregory Nutt
4c82827ab1 board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 14:37:22 -06:00
Gregory Nutt
34a2839244 Kinetis GPIO: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 11:33:03 -06:00
Gregory Nutt
67de2e5f66 Add argument to STM32 EXTI interrupt handlers. 2017-02-27 14:21:30 -06:00
Gregory Nutt
2321560690 More missing argument paramters in interrupt handlers. 2017-02-27 08:06:07 -06:00
Gregory Nutt
6e2ee2b07f Kinetis: GPIO interrupt handling needs handler argument. 2017-02-27 07:20:21 -06:00
Gregory Nutt
c8018f2b09 Freedom K66F: Fix a compilation error. Was including the wrong chip.h 2017-02-25 12:11:15 -06:00
Gregory Nutt
90e63ba18e Purely cosmetic changes from review of last PR. 2017-02-25 11:43:05 -06:00
David Sidrane
0cbc03255c Kinetis:Add LPUART and Clock configuartaion to freedom-k66f board 
Pin out LPUART0 for testing
   Define BOARD_SOPT2_PLLFLLSEL ti select MCGPLLCLK
   Define BOARD_SIM_CLKDIV3_FREQ etal to provide BOARD_LPUART0_FREQ
 2017-02-25 07:05:34 -10:00
Gregory Nutt
4539988d00 Removed CONFIG_LIBC_ARCH_BZERO. bzero() is a deprecated interface. There are no architecture-specific replacements and, if there were, they should replace memset(), not bzero(). 2017-02-22 10:41:49 -06:00
David Sidrane
40c4e1c94d Kinetis refreshed freedom-k66f nsh config 2017-02-15 13:42:36 -10:00
David Sidrane
ec9fda4c8c Kinetis:Freedom-K66F uses ENET_1588_CLKIN as RMII clock 2017-02-15 13:42:36 -10:00
David Sidrane
acc8c4bf28 Kinetis: Define FTM3 Pins 2017-02-15 13:42:36 -10:00
David Sidrane
81345c9d42 Kinetis: Updated Freedom-K66F Readme 2017-02-14 09:15:42 -10:00
David Sidrane
3fb6064efe Kinteis: Freedom-K66F refreshed config 
Update Console to match README.txt
 2017-02-14 09:15:42 -10:00
David Sidrane
82e93bb3f0 Kinetis: Map Freedom-K66F Ethernet pins 2017-02-14 09:15:23 -10:00
David Sidrane
f56e0a43a4 Inital commit of NXP Freedom-k66f development board 2017-02-13 14:35:51 -10:00