chao.an
43497df78b
wireless/bcm43xxx: add dynamic kso control support
...
1. PMU control by KeepSdioOn(KSO) if firmware support save restore
2. Remove watchdog timer
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-25 19:52:13 +08:00
chao.an
2eb1124db5
wireless/bcm43xxx: correct the return value
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-25 16:45:34 +08:00
Gustavo Henrique Nihei
f2d1f25202
drivers/lcd: Fix regression on ILI9341 introduced after #6465
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-06-24 17:44:53 -03:00
chao.an
15864ff109
wireless/bcm43xxx: add get country code support
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-23 21:48:08 +08:00
Lingao Meng
77557d8d9f
drivers: serial: Add error for insuff buffer
...
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
2022-06-23 16:50:45 +08:00
chao.an
442e75575e
wireless/bcm43xxx: add set country code support
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-23 00:08:10 +08:00
Michael Jung
9140693567
Add lcd_dev_s pointer to lcd_planeinfo_s
...
In order to support multiple LCD instances per board, add a pointer from
lcd_planeinfo_s to the lcd_dev_s which it belongs to. Also enhance the
putrun, getrun, putarea and getarea methods to pass through the
lcd_dev_s pointer to the respective device driver.
Port all LCD device drivers to this lcd_planeinfo_s extension.
Enhance SSD1306 driver to support multiple LCDs.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
2022-06-21 21:33:23 +08:00
chao.an
04fcbb5cb8
wireless/bcm43xxx: add auto power saving support
...
switch firmware power mode between PM_MAX/PM_FAST
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-21 02:33:18 +08:00
chao.an
2772efc862
wireless/bcm43xxx: remove small chunks to improve clm download speed
...
Chunk length is fine as long as it does not exceed 1400
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 23:12:10 +08:00
chao.an
2e3ed3ae67
wireless/bcm43xxx: prefer HPWORK if bcmf task has higher priority than HPWORK
...
Use high priority queue if the bcmf daemon task has a higher priority
than HPWORK, which will bring better performance especially on devices
that focus on real-time of network.
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 23:11:52 +08:00
chao.an
47ebec34e3
wireless/bcm43xxx: merge frame send to once to improve the performance
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 20:59:50 +08:00
chao.an
fa6ea23101
wireless/bcm43xxx: enable power saving on netdev up/down
...
Move sdio/firmware de/initialize to ifup/down
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 19:08:00 +08:00
chao.an
0ec74ec6dd
wireless/bcm43xxx: remove global variable for bcmf_sdio_thread
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 11:43:25 +08:00
chao.an
fbddae8813
wireless/bcm43xxx: add customized MAC address support
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-19 10:13:23 +08:00
chao.an
e498e5308a
wireless/bcm43xxx: handle disassoc correctly
...
1. use WLC_DISASSOC to deal disconnect event
2. carrier net device status
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-18 19:43:13 +08:00
chao.an
e6a23e7b8a
wireless/bcm43xxx: sort scan result by rssi
...
1. Replace SCAN_RESULT_SIZE to SCAN_RESULT_ENTRIES
2. filter scan result with better rssi
3. Sort scan result by rssi
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-18 19:42:30 +08:00
Xiang Xiao
0de089e2e8
wireless/bcm43xxx: Don't call bcmf_board_setup_oob_irq in bcmf_sdio_thread
...
since oob irq is already setup in bcmf_bus_setup_interrupts, it waste
time and energy to do the same thing repeatly in the work thread.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-06-17 20:12:41 +08:00
chao.an
2992b10fbb
wireless/bcm43xxx: add more ioctl command support
...
Support command:
SIOCGIWFREQ
SIOCGIWMODE
SIOCSIWAP
SIOCGIWAP
SIOCGIWESSID
SIOCGIWRATE
SIOCGIWTXPOW
SIOCGIWSENS
SIOCGIWRANGE
Before: After:
cp> wapi show wlan0 cp> wapi show wlan0
wlan0 Configuration: wlan0 Configuration:
IP: 192.168.31.202 IP: 192.168.31.202
NetMask: 255.255.255.0 NetMask: 255.255.255.0
ioctl(SIOCGIWFREQ): 88 Frequency: 5785
ERROR: wapi_get_freq() failed: -88 Flag: WAPI_FREQ_AUTO
ioctl(SIOCGIWESSID): 88 Channel: 157
ERROR: wapi_get_essid() failed: -88 Frequency: 5785
ioctl(SIOCGIWMODE): 88 ESSID: archer5
ERROR: wapi_get_mode() failed: -88 Flag: WAPI_ESSID_ON
ioctl(SIOCGIWAP): 88 Mode: WAPI_MODE_MANAGED
ERROR: wapi_get_ap() failed: -88 AP: ec:41:18:e0:76:7f
ioctl(SIOCGIWRATE): 88 BitRate: 58500
ERROR: wapi_get_bitrate() failed: -88 Flag: WAPI_BITRATE_FIXED
ioctl(SIOCGIWTXPOW): 88 TxPower: 31
ERROR: wapi_get_txpower() failed: -88 Flag: WAPI_TXPOWER_DBM
ioctl(SIOCGIWSENS): 25 Sense: -17
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-17 18:27:12 +08:00
chao.an
9c68064024
wireless/bcm43xxx: add status print on bcmf_wl_auth_event_handler()
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-17 16:17:01 +08:00
Charles Cross
d12e2778a5
Adds device descriptor for the MB5RS2MTA 256KB FRAM part
2022-06-17 09:57:56 +08:00
Xiang Xiao
22548d71eb
drivers/syslog: reuse rmutex_t for the recursive check
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-06-16 19:01:49 +03:00
Satoshi Togawa
a9ad1a336b
usbhost_cdcacm: fix error with interrupt IN endpoint.
2022-06-16 19:01:17 +03:00
chao.an
e2c154dffe
wireless/bcm43xxx: configurable buffer size of escan result
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 23:36:40 +08:00
chao.an
29dd12283c
wireless/bcm43xxx: replace all busy delay to nxsig_usleep
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 23:02:09 +08:00
chao.an
591942f69b
mmcsd/sdio: correct return value of sdio_probe()
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 22:48:21 +08:00
chao.an
b33a709213
wireless/bcm43xxx: improve throughput of net driver
...
1. Wake up tx if there is data alreay to sent after rx update
2. Try tx queue again after every data frame sent
iperf test:
```
TCP RX 4M->16M
TCP TX 2M->14M
UDP RX 18M->26M
UDP TX 2M->18M
```
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 21:08:28 +09:00
Xiang Xiao
f75f100954
bcm43xxx: Remove bcmf_txavail_work and resue bcmf_tx_poll_work
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-06-16 09:13:16 +03:00
chao.an
6d85e9b320
wireless/bcm43xx: replace sem_wait to uninterruptible version
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 02:44:47 +08:00
chao.an
0951d859d3
wireless/bcm43xxx: configurable schedule priority of daemon thread
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 01:41:50 +08:00
chao.an
4712307ecc
wireless/bcm43xxx: fix typo sq_init() -> dq_init()
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-16 01:40:41 +08:00
chao.an
e75c88df5b
wireless/bcm43xxx: load nvram from file system
...
added an option to load nvram from file system, which will help developers
easily to tuning the firmware parameters without compile firmware.
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-15 22:19:02 +08:00
chao.an
f6b8cc1407
wireless/bcm430xx: rename chip minor id to 'x'
...
rename 4301x chip minor id to 'x' to compatible more versions of variant of bcm430xx
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-15 02:01:37 +08:00
chao.an
4659e00fac
wireless/bcm43xxx: add extended join parameters
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-15 00:56:31 +08:00
chao.an
28b46bd381
wirless/sdio: frame length should with guard bound
...
some SDIO device will return the larger frames out of bound
error log:
bcmf_sdpcm_readframe: Frame is too large, cancel 1544 1536
bcmf_sdpcm_readframe: Frame is too large, cancel 1544 1536
bcmf_sdpcm_readframe: Frame is too large, cancel 1544 1536
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-14 18:31:22 +03:00
Petro Karashchenko
e42e3aa642
drivers/syslog: fix deadlock by reverting part of the changes from b88a8cf39f
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-06-14 00:11:28 +08:00
chao.an
c7fd1a113f
wireless/bcm43xxx: add support of bcm43013 chip
...
Reference:
https://www.broadcom.cn/bcm43013
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-13 21:03:05 +08:00
chao.an
7e1f906b74
drvers/mmcsd/sdio: function enable should wait for CCCR_IORDY
...
1. function enable should wait for CCCR_IORDY
2. enlarge wait timeout from 10ms to 1s
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-06-13 15:45:09 +03:00
zouboan
cb8c992914
drivers/sensors: add driver for as5048a magnetic encoder
2022-06-13 12:21:35 +03:00
Adam Kaliszan
88bfadc55d
e-ink ssd1680 driver
...
No BSP files
2022-06-10 22:19:29 +08:00
Eero Nurkkala
9f9fb17d64
usbdev/Kconfig: allow CONFIG_USBMSC_IFNOBASE configuration
...
usbmsc.h uses the CONFIG_USBMSC_IFNOBASE configuration option,
but it cannot be set anywhere. Provide means to configure this
option which is useful when it's other than the default zero.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2022-06-09 20:44:40 +08:00
Xiang Xiao
f1236da21c
fs: Make the binary(no process) mode as the default
...
POSIX require file system shouldn't enable the \r and \n conversion by default
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-06-07 20:22:26 +03:00
Fotis Panagiotopoulos
73d5a27702
Fix in default syslog date format.
2022-06-05 22:23:32 +08:00
Fotis Panagiotopoulos
c0df7317ac
Fix in syslog file separator.
2022-06-04 14:30:15 +08:00
Michael Jung
9be3848491
Add driver for WIZnet W5500 Ethernet controller
...
A device driver based on drivers/net/skeleton.c, which uses the W5500 in
MACRAW mode (i.e. bypassing the integrated protocol stack).
Signed-off-by: Michael Jung <michael.jung@secore.ly>
2022-06-03 13:01:23 +08:00
zhanghongyu
035d925864
devif: remove all devif_timer
...
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2022-06-02 20:11:50 -03:00
Alin Jerpelea
72f399e052
drivers: video: add isx019 camera sensor
...
The driver is provided by Spresense SDK
ISX019 has the DOL-HDR feature, which combines images with different exposure so that
both bright and dark data of high-contrast subject can be viewed at the same time.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2022-05-31 19:52:33 +08:00
SPRESENSE
247ad41bb2
drivers/video/isx012: Fix getting the iso sensitivity
...
Fix bug to get the value of iso sensitivity.
2022-05-30 20:38:47 +03:00
SPRESENSE
acde5fed49
drivers/video/isx012: Fix getting the value of auto exposure
...
Fix bug to get the current setting value at AE auto mode.
2022-05-30 20:38:47 +03:00
SPRESENSE
1613ded060
drivers/video/isx012: Add exclusive controls for I2C access
...
Add exclusive control to prevent from I2C write(for sending requst) and
I2C read(for receiving response).
2022-05-30 20:38:47 +03:00
SPRESENSE
bea6d3a7ef
drivers/video: Fix bug that is_available() is false
...
is_available() may be false because chip id register does not
have unique value.
So, judge availability not by chip id but by i2c accessibility.
2022-05-30 20:38:47 +03:00
SPRESENSE
b296494fb8
drivers/video: Avoid additional overflow cases
...
Add clip size validation to avoid additional overflow.
2022-05-30 20:38:47 +03:00
SPRESENSE
1212d3b7d8
drivers/video: Fix multiplication overflow
...
Add cast to uint32_t type to avoid multiplication overflow.
2022-05-30 20:38:47 +03:00
SPRESENSE
c0ea6c5b49
drivers/video: Fix thumbnail size bug
...
Fix copy size to set thumbnail component, when thumbnail format is used
without clipping.
2022-05-30 20:38:47 +03:00
SPRESENSE
9c57850466
drivers/video: Support clip
...
Support clip by ioctl(VIDIOC_S_SELECTION) and ioctl(VIDIOC_G_SELECTION).
2022-05-30 20:38:47 +03:00
SPRESENSE
b45489753a
drivers/video: Enable to select connected image sensor driver at runtime
...
Enable to select connected image sensor driver at runtime by adding is_available()
to image sensor I/F.
2022-05-30 20:38:47 +03:00
SPRESENSE
a25ac08774
boards: cxd56xx: Change pin initialization timing for camera
...
Change pin initialization timing for camera from board power on to camera device
power on for the following purposes.
- avoid unnecessary power consumption
- Make the corresponding pins available for other uses when camera is not in use
2022-05-30 20:38:47 +03:00
SPRESENSE
229c7d30b6
drivers/video: Support ioctl(VIDIOC_QUERYCAP)
...
Support ioctl(VIDIOC_QUERYCAP) to get driver's name.
2022-05-30 20:38:47 +03:00
anjiahao
b88a8cf39f
use rmutex inside of all repeated implementation
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2022-05-30 19:43:48 +08:00
Xiang Xiao
7ec6b4c7dd
Change dpends on SCHED_[L|H]PWORK to SCHED_WORKQUEUE
...
since the code could map the unsupported work to the
supported one and remove select SCHED_WORKQUEUE from
Kconfig since SCHED_[L|H]PWORK already do the selection
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-28 18:41:51 +03:00
klmchp
d9e95a8f9b
fix devname array size
...
Fix drivers/mtd/smart.c devname overflow issue.
2022-05-26 10:00:14 -03:00
Cis van Mierlo
12469dd15e
SSD1306: Added option to force reconfigure display after power off
2022-05-24 23:25:24 +08:00
Xiang Xiao
5b0b4bd586
sched/wdog: Change the return type of wd_gettime from int to sclock_t
...
to handle 64bits sclock_t correctly
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-19 23:21:54 +03:00
Xiang Xiao
6642741612
timers/watchdog: Ensure it's the idle domain before keepalive
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-17 22:57:52 +03:00
gaojiawei
335fc3dde2
syslog: Fixed a potential buffer overflow issue
...
The `CONFIG_SYSLOG_MAX_CHANNELS` is user-specified, however, if the user
defines more channels than what `CONFIG_SYSLOG_MAX_CHANNELS` was defined as,
a potential buffer overflow occurred. Although the compiler does warn us about
that, we should explicitly tell the user this is an error.
Signed-off-by: gaojiawei <gaojiawei@xiaomi.com>
2022-05-18 01:36:16 +08:00
Xiang Xiao
1fb8c13e5e
Replace nxsem_timedwait_uninterruptible with nxsem_tickwait_uninterruptible
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-15 13:55:58 +03:00
Xiang Xiao
816ce73ab4
Replace nxsem_timedwait with nxsem_tickwait
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-15 13:55:58 +03:00
Xiang Xiao
22e4f1c59a
sched: Remove start from nxsem_tickwait[_uninterruptible]
...
to simplify both caller and callee
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-15 13:55:58 +03:00
Petro Karashchenko
0fee5a2b84
nuttx: fix typos in comments
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-05-14 23:45:52 +08:00
Xiang Xiao
9072eecc30
sched/wqueue: Change the return type of work_notifier_teardown to void
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-14 00:35:29 +03:00
Xiang Xiao
323d8d9547
mmcsd: Add FAR to the pointer argument
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-13 15:41:27 +03:00
Xiang Xiao
679bc88cab
drivers/sdio: Call SDIO_LOCK before and after the transaction
...
follow the same behaviour in drivers/mmcsd/mmcsd_sdio.c
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-13 15:41:27 +03:00
Cis van Mierlo
e2b0d7ef6e
LCD: Added existing FBIO_SETPOWER support to lcd_framebuffer.c
2022-05-09 21:16:53 +08:00
Cis van Mierlo
a71f11d480
LCD SSD1306: Added custom configuration option
2022-05-09 21:16:22 +08:00
okayserh
2696aee11d
Fixed the bug that prevented the code from working in uninitialized
...
state (wrong I2C write size). Some improvements of the code.
2022-05-09 10:34:29 +08:00
okayserh
476770e9fd
Added functionality for Audio support with the STM32F746 Discoboard
...
In particular additions to wm8994.h and filled functionality into
wm8994.c.
Resolved a few more remarks from review.
2022-05-07 11:52:51 -03:00
Xiang Xiao
346c3a1e83
drivers/sensors: Fix incompatible pointer type for bool
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-05 16:23:32 -03:00
Xiang Xiao
0b84e07467
sensors/ak09912: Fix the style problem
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-05-03 16:50:52 +03:00
Takayoshi Koizumi
afc09fb442
drivers/audio/cxd56: Workaround for HW issue of CXD56
...
Because of HW issue, Audio output volume is limited until -30db as maximum.
This commit fix it. And fix the bug of voulme control.
2022-04-28 08:12:47 +09:00
Lingao Meng
daccde3605
drivers: mtd: fix null buffer reference
...
When device not support byte read or readlen less than
device block size, will use `dev->buffer` as dst address.
`CFGDIOC_FIRSTCONFIG` and `CFGDIOC_NEXTCONFIG` should also
malloc buffer before call `mtdconfig_readbytes`.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
2022-04-27 23:38:40 +08:00
Jiuzhu Dong
54b770d46a
driver/ioexpander: remove response about irq_handler
...
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2022-04-27 17:27:24 +08:00
Xiang Xiao
5a565e753c
pm: Move pm_initialize call from driver_initialize to xxx_pminitialize
...
since it's too late with the below commit:
ommit a594a5d7a8
Author: chao.an <anchao@xiaomi.com>
Date: Mon Apr 11 19:44:26 2022 +0800
sched/init: drivers_initialize() should be late than up_initialize()
up_initialize
|
->up_serialinit
|
->uart_register /* ("/dev/console", &CONSOLE_DEV); */
drivers_initialize
|
->syslog_console_init
|
->register_driver /* ("/dev/console", &g_consoleops, 0666, NULL); */
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-22 14:36:27 +03:00
Xiang Xiao
c29a3b7bd8
pipe: Increase buffer size by one byte to ompensate the full indicator
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-21 12:45:30 +03:00
Alin Jerpelea
2a44c99837
drivers: sensors: mlx90614: migrate the license to Apache
...
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2022-04-20 21:05:45 +08:00
Alin Jerpelea
bf087fee5d
drivers: mtd: gd5f: migrate the license to Apache
...
Xiaomi has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2022-04-20 21:05:45 +08:00
Alin Jerpelea
e84cf86ecb
LICENSE: document missing mtd files
...
add missing files to the LICENSE file.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2022-04-20 21:05:45 +08:00
Alin Jerpelea
2e9d6081ce
drivers: leds: ncp5623c: migrate the license to Apache
...
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2022-04-20 21:05:45 +08:00
Xiang Xiao
ef1a98dd00
Remove the unneeded void cast
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-17 23:32:05 +03:00
Xiang Xiao
32ee2ae407
Remove the unneeded worker_t cast
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-17 23:32:05 +03:00
Petro Karashchenko
09b3fb25ab
drivers: remove unimplemented open/close/ioctl interfaces
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-04-15 16:56:25 +08:00
Xiang Xiao
bb1e81eb95
driver/mmcsdio: do not hold the semaphore in idle thread too
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-14 17:12:10 +03:00
chao.an
062010c660
driver/mmcsdio: do not hold the semaphore on interrupt context
...
so we can do the full dump to mmc/sd card in the panic case
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-04-14 17:12:10 +03:00
Xiang Xiao
4b9c74514d
drivers/power: Remove activity_governor.h and greedy_governor.h
...
since they aren't really used anymore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-13 15:38:46 +03:00
zhuyanlin
5cc4f22b43
power/governor: Remove the duplicated function prototype
...
since they are declared include/nuttx/power/pm.h by:
commit 5ce181e6b7
Author: zhuyanlin <zhuyanlin1@xiaomi.com>
Date: Mon Feb 14 15:32:40 2022 +0800
power:govorner: add govorner to per domain.
For mult domains scene,,
activity and greety can be used at same time.
Let user to select domain governor.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
and add static const to g_pmgovernor
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2022-04-13 15:38:46 +03:00
Petro Karashchenko
ea5ffac7d1
drivers/syslog: update description if Kconfig
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-04-11 23:36:39 +08:00
SPRESENSE
9cd53d714e
drivers/sensors/sgp30: Fix redundant parameter check
...
Fix redundant conditions.
2022-04-11 13:29:35 +03:00
SPRESENSE
3787a362bf
drivers/sensors/scd30: Fix invalid parameter check
...
Fix invalid parameter check and redundant conditions.
2022-04-11 13:29:35 +03:00
SPRESENSE
bf332cf888
drivers/sensors: Add new driver for scd41 sensor module
...
Add Sensirion's SCD41 CO2, temperature and humidity sensor driver.
2022-04-11 13:29:35 +03:00
okayserh
218cbb470a
Fixed source code format errors.
2022-04-10 19:12:10 -03:00
okayserh
56f0d72465
Minor fix, function name was wm8994_setvolume instead of
...
wm8904_setvolume.
2022-04-10 19:12:10 -03:00
okayserh
eb3e8175de
Fixes some issues with the implementation of the balance
...
functionality. In function "wm8904_hw_reset" the priv->balance
is initialized with b16HALF, indicating a range from
0 to b16ONE. In function "wm8904_setvolume" the assumed
range for priv->balance is between 0 and 1000. The changes
now make this consistent for 0 to b16ONE-1. Furthermore,
in wm8904_configure the change of balance was not implemented.
2022-04-10 19:12:10 -03:00