Summary:
- I noticed that adb shell failed when sh is spawned.
- Finally, I found that an error happened when executing dup2() action
if the file descriptor has the O_CLOEXEC option.
- This commit fixes this issue by dropping the option in the API.
Impact:
- posix_spawn_file_actions_adddup2() only
Testing:
- adbd with sabre-6quad:netnsh (will be merged later)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
some toolchain provider remove const qualifier from global_impure_ptr
(e.g. Espressif) but other provider keep it(e.g. ARM or Cadence), so
let's define const to empty macro to pass the compile and more safety.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
but just format the low 32bits if CONFIG_LIBC_LONG_LONG isn't enabled to
avoid to expand the code space to much.
Note: the size will increase 192 bytes on stm32_tiny:nsh.
Before the change:
text data bss dec hex filename
41444 184 1656 43284 a914 nuttx
After the change:
text data bss dec hex filename
41636 184 1656 43476 a9d4 nuttx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
and remove CONFIG_LIBC_LONG_LONG option to simplify the usage.
note: the size will increase 668
before change:
text data bss dec hex filename
168440 348 4480 173268 2a4d4 nuttx
after change:
text data bss dec hex filename
169108 348 4480 173936 2a770 nuttx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
* libs/libc/misc/lib_getrandom.c, in function getrandom():
We were assigning the return value of _NX_READ() to nbytes, a
variable of the unsigned type size_t. Note that _NX_READ() resolves
to either read() or nx_read(), both of which return the signed type
ssize_t to indicate either the number of bytes read successfully
(>= 0) or an error (< 0). Then we were testing for a negative
size_t value, a condition that can never occur. The end result is
that if an error occured in _NX_READ(), it would never be detected
and getrandom() would return some large positive value. This bug is
corrected by assigning the return value of _NX_READ() to a new local
variable, ret, of size ssize_t.
The "p" format specifier already prepends the pointer address with
"0x" when printing.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Make use of XCHG/BSWAP on x86, REV16 and REV on ARMv6-m and above,
and whatever other optimized instructions on other platforms.
Defines extra CONFIG variables, and removes the unused functions for
endian-swapping. Fixes some oversights in using the macros.
For CONFIG_BUILD_KERNEL using the sched/task/task_exithook implementation
will just not work. It calls user code with kernel privileges which is
a bit of a security issue.
Targets build during the kernel phase did not have their dependencies
specified and thus they were not rebuilt after their dependencies have
changed, for example by changing options in menuconfig.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Summary:
- This commit adds R_RISCV_JAL support to arch_elf.c
- The code only checks the immediate value but does not relocate it
because it is done by the compiler.
Impact:
- None
Testing:
- Tested with rv-virt:knsh64 (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Do not call strlen() here. Old implementation iterated
over string twice, if searched for position was at the
beginning. This commit changes strrchr() to scan string
only once, regardless of input.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
to fix the gcov link error:
arm-none-eabi-ld: /home/xiaoxiang/vela/prebuilts/gcc/linux/arm/bin/../lib/gcc/arm-none-eabi/10.3.1/thumb/v7e-m/nofp/libgcov.a(_gcov.o): in function `gcov_error_exit':
libgcov-driver.c:(.text+0x7c): undefined reference to `_impure_ptr'
arm-none-eabi-ld: /home/xiaoxiang/vela/prebuilts/gcc/linux/arm/bin/../lib/gcc/arm-none-eabi/10.3.1/thumb/v7e-m/nofp/libgcov.a(_gcov.o): in function `get_gcov_error_file':
libgcov-driver.c:(.text+0x1e0): undefined reference to `_impure_ptr'
arm-none-eabi-ld: /home/xiaoxiang/vela/prebuilts/gcc/linux/arm/bin/../lib/gcc/arm-none-eabi/10.3.1/thumb/v7e-m/nofp/libgcov.a(_gcov.o): in function `gcov_exit_open_gcda_file.isra.0':
libgcov-driver.c:(.text+0x660): undefined reference to `_impure_ptr'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
1.Remove CXX_INITIALIZE_MACHO and CXX_INITIALIZE_SINIT
2.Merge cxx_initialize_sinit.c and cxx_initialize_macho.c into cxx_initialize.c
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- Cast to unsigned char for strcmp and strncmp
- strcmp and strncmp are described following by opengroup.org
The sign of a non-zero return value shall be determined by the sign
of the difference between the values of the first pair of bytes
(both interpreted as type unsigned char) that differ in the strings
being compared.
https://pubs.opengroup.org/onlinepubs/9699919799/functions/strcmp.htmlhttps://pubs.opengroup.org/onlinepubs/9699919799/functions/strncmp.html
Impact:
- strcmp and strncmp return value
Testing:
- ostest on sabre-6quad:smp w/ qemu
Signed-off-by: Oki Minabe <minabe.oki@gmail.com>
Restore the checks which got completely broken by the following change.
```
commit 15142a8b10
Author: anjiahao <anjiahao@xiaomi.com>
Date: Fri Apr 1 16:20:03 2022 +0800
modlib/modlib_bind:fix unsigned_compare with zero
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
```
The jump instruction relocation had an assert that tests for jumps with
an offset of 0. This makes it so that a while(1); statement causes an
assert because the jump instruction points to the same address, which
is perfectly legal.
Addend was not handled correctly in several reloc types.
Add ADD32/64 + SUB32/64 relocations, for some reason the compiler
I use likes to add them.
each invocation of va_start() must be matched by a corresponding
invocation of va_end() in the same function
Signed-off-by: chao.an <anchao@xiaomi.com>
After check the official specification of ARM ISA
and Thumb ISA, the arch_setjmp_thumb.S are written
by arm unified assembly language,
so it easy to make it works for ARM and thumb ISA.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Error: module/mod_insmod.c:203:3: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
203 | strncpy(modp->modname, modname, MODLIB_NAMEMAX);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wqueue/kwork_thread.c: In function 'work_start_lowpri':
Error: wqueue/kwork_thread.c:212:22: error: '%lx' directive output may be truncated writing between 1 and 16 bytes into a region of size 14 [-Werror=format-truncation=]
212 | snprintf(args, 16, "0x%" PRIxPTR, (uintptr_t)wqueue);
local/local_sockif.c: In function 'local_getsockname':
Error: local/local_sockif.c:392:11: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
392 | strncpy(unaddr->sun_path, conn->lc_path, namelen);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
chip/esp32_wifi_utils.c: In function 'esp_wifi_scan_event_parse':
Error: chip/esp32_wifi_utils.c:373:37: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset(ap_list_buffer, 0x0, sizeof(ap_list_buffer));
^
stdio/lib_fputs.c: In function 'fputs':
Error: stdio/lib_fputs.c:99:9: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
Error: stdio/lib_fputs.c:99:27: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
stdio/lib_vfprintf.c: In function 'vfprintf':
Error: stdio/lib_vfprintf.c:40:6: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (stream)
^
string/lib_strdup.c: In function 'strdup':
Error: string/lib_strdup.c:39:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strndup.c: In function 'strndup':
Error: string/lib_strndup.c:56:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strpbrk.c: In function 'strpbrk':
Error: string/lib_strpbrk.c:39:7: error: nonnull argument 'str' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~
Error: string/lib_strpbrk.c:39:15: error: nonnull argument 'charset' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~~~~~
string/lib_strrchr.c: In function 'strrchr':
Error: string/lib_strrchr.c:40:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
Error: time/lib_asctimer.c:73:50: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 12 [-Werror=format-truncation=]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~
time/lib_asctimer.c:73:21: note: directive argument in the range [-2147481748, 2147483647]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
time/lib_asctimer.c:73:3: note: 'snprintf' output between 17 and 68 bytes into a destination of size 26
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
g_wday_name[tp->tm_wday], g_mon_name[tp->tm_mon],
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tp->tm_mday, tp->tm_hour, tp->tm_min, tp->tm_sec,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1900 + tp->tm_year);
~~~~~~~~~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- In case of BUILD_KERNEL, NuttX uses USR mode sp and SVC mode sp.
- The kernel runs on SVC mode sp.
- While the kernel is running, up_getsp() cannot get the TLS address.
- The kernel requires tls_get_info() function.
- For the user land, up_getsp() can be used.
- tls_getinfo.c is always compiled and tls_get_info() function is
filtered by macros in the tls_getinfo.c.
Impact:
BUILD_KERNEL
Testing:
test program on custom Cortex-A9 board (BUILD_KERNEL)
ostest on sabre-6quad:smp (QEMU, BUILD_FLAT)
Signed-off-by: Oki Minabe <minabe.oki@gmail.com>
Summary:
- This commit adds thumb support to i.MX6
- Also, applies the same coding style to arch_elf.c
Impact:
- i.MX6 only
Testing:
- Tested with sabre-6quad:smp (QEMU, Dev board)
- Tested with sabre-6quad:netnsh (QEMU)
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds thumb support to arch_elf.c
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
