Allows the debug behavior to be specified as part of the board, architecture or chip configuration. This is useful when using out-of tree custom board configurations.
Pinephone Pro port just nsh
Status:
booting till GICD / IRQ issue
style cleanups
start to fix style checks
revert offset
whitespaces
revert a64 bringup file
prob last cleanup
more cleanups
remove dts
move changes from a64 hardware specific folders to rk3399
undo common changes (except head.s)
revert gitignore
missing irq.h and rk3399_serial.c need to finish cleaning them up
WIP
add source for load address
make debug print hex again add board include
Pinephone Pro port just nsh
Status:
booting till GICD / IRQ issue
style cleanups
start to fix style checks
revert offset
whitespaces
revert a64 bringup file
prob last cleanup
more cleanups
remove dts
move changes from a64 hardware specific folders to rk3399
undo common changes (except head.s)
revert gitignore
missing irq.h and rk3399_serial.c need to finish cleaning them up
WIP
add source for load address
remove ccache, add board memory map
remove board reset
This patch modify the script to update only the boards configs
of an specific chip or only the boards of an specific architecture.
Examples:
refresh.sh add custom board verify
custom board:
$ ./tools/refresh.sh --silent ../../xxx/configs/ap
$ ./tools/refresh.sh --silent /yyy/xxx/configs/ap
$ ./tools/refresh.sh --silent yyy/xxx/configs/ap
Signed-off-by: dengwenqi <dengwenqi@xiaomi.com>
Documentation for PWMIOC_SETCHARACTERISTICS ioctl command mentioned
that this command will neither start nor stop the pulsed output. This
however is incorrect as PWMIOC_SETCHARACTERISTICS command leads to
pwm_start() function which starts the pulsed output.
While this might not be the correct behaviour (I would probably welcome
the option to set PWM characteristics without starting the pulsed output)
it is the way the PWM driver is coded for many architectures. Future
enhancement might be to add function pwm_setchar() for example to just
set characteristics without starting the PWM output.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Use PRIx64 which defines the width correctly regardless or architecture.
Fixes build error:
rpmsg/rpmsg_sockif.c:610:57: error: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'uint64_t' {aka 'long unsigned int'} [-Werror=format=]
610 | snprintf(conn->nameid, sizeof(conn->nameid), ":%llx", g_rpmsg_id++);
| ~~~^ ~~~~~~~~~~~~
| | |
| | uint64_t {aka long unsigned int}
| long long unsigned int
| %lx
Fixes build error with -Werror:
shm/shmfs.c: In function 'shmfs_read':
shm/shmfs.c:122:33: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
122 | memcpy(buffer, sho->paddr + startpos, nread);
| ^
shm/shmfs.c: In function 'shmfs_write':
shm/shmfs.c:166:25: error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]
166 | memcpy(sho->paddr + startpos, buffer, nwritten);
| ^
cc1: all warnings being treated as errors
1 page might not be enough, if the task has a bigger stack. Best effort
is to allocate the default amount, however this won't work will all
tasks either.
Currently TX_FIFO_SIZE is not altered in mpfs_ep_set_fifo_size(),
but all paths (RX and TX) change MPFS_USB_RX_FIFO_SIZE only.
Fix the TX_FIFO_SIZE setup.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Summary:
- I noticed that device discovery for virtio-mmio devices does not
work without bus=virtio-mmio-bus.x option. Without this option,
qemu assigns the virtio device into the virtio-mmio space
in reverse order automatically.
- To fix this issue, we must specify the correct numbers for the
target machines. (i.e. arm32/64->32, rv32/64->8)
Impact:
- None
Testing:
- Tested with qemu-7.2.4
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
