Gregory Nutt
|
62666a030b
|
SAMA5D4-EK: Add a configuration for testing IPv6
|
2015-02-09 10:51:05 -06:00 |
|
Gregory Nutt
|
9eda193c39
|
Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt
|
2015-01-05 15:12:45 -06:00 |
|
Gregory Nutt
|
a3b32b0545
|
DK-TM4C129X: The network monitor is no enabled by default in NSH configuration
|
2015-01-05 12:09:33 -06:00 |
|
Gregory Nutt
|
7cea0f5a69
|
SAMA5D3 Xplained: Add an apps/examples/bridge configuration
|
2014-11-20 16:24:30 -06:00 |
|
Gregory Nutt
|
4dea8ef794
|
Freedom K25Z: Fix missing file inclusion in board Makefile. From Alan Carvalho de Assis
|
2014-11-19 07:17:46 -06:00 |
|
Gregory Nutt
|
471f2bd1b5
|
Update README
|
2014-11-18 14:28:27 -06:00 |
|
Gregory Nutt
|
2803545ebc
|
SAM EMAC: Fix typo in the check for successfull allocation of a timer
|
2014-11-18 14:20:31 -06:00 |
|
Gregory Nutt
|
726af630e2
|
SAMA5D4-EK bridge configuration: Correct configuration -- PHY interfaces are RMII not MII
|
2014-11-17 17:44:49 -06:00 |
|
Gregory Nutt
|
16cd0cce81
|
Update ChangeLog
|
2014-11-17 12:48:01 -06:00 |
|
Gregory Nutt
|
c0c86da44c
|
Change SAMA5D4-EK bridge configuration so that runs out of DRAM
|
2014-11-17 12:03:40 -06:00 |
|
Gregory Nutt
|
b3b746c44a
|
configs/sama5d4-ek/bridge: Add a simple test for the dual EMACs on the SAMA5D4
|
2014-11-17 10:56:02 -06:00 |
|
Gregory Nutt
|
3715040386
|
Change CONFIG_NET_RECEIVE_WONDOW to CONFIG_NET_ETH_TCP_RECVWNDO or CONFIG_NET_SLIP_TCP_RECVWNDO in all defconfig files
|
2014-11-16 10:49:33 -06:00 |
|
Gregory Nutt
|
66f49ae9b4
|
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU in all configs/ README.txt files
|
2014-11-16 08:18:56 -06:00 |
|
Gregory Nutt
|
1bae6f4d60
|
Cosmetic updates; updates to README
|
2014-11-14 09:54:00 -06:00 |
|
Gregory Nutt
|
857d0b8e76
|
Remove non-standard, conditional syslog_enable(), instead only the required, standard setlogmask()
|
2014-10-09 06:09:03 -06:00 |
|
Gregory Nutt
|
0d4e873f9b
|
Change all occurrences of NxConsole to NxTerm
|
2014-09-20 15:01:50 -06:00 |
|
Gregory Nutt
|
ae00013b74
|
Update README files
|
2014-09-19 10:12:03 -06:00 |
|
Gregory Nutt
|
e2331ce415
|
SAMA5D4-EK/nsh: WM8904 support enabled; README updated
|
2014-09-18 14:29:20 -06:00 |
|
Gregory Nutt
|
033d1b1fdc
|
SAMA5D4-EK: Correct WM8904 PCK output selection
|
2014-09-18 08:35:15 -06:00 |
|
Gregory Nutt
|
2e955d2ce4
|
SAMA5D4-EK: Add documentation/support for Rev E. board. Refresh NSH configuration. Fix some build errors/warnings introduced with recent work with the knsh configuration
|
2014-09-17 11:47:00 -06:00 |
|
Gregory Nutt
|
f4099cf225
|
Update README
|
2014-09-16 16:12:00 -06:00 |
|
Gregory Nutt
|
aac5139ba8
|
Update TODO and a README
|
2014-09-16 13:58:55 -06:00 |
|
Gregory Nutt
|
5320430570
|
Update README, TODO, and make some unfinished configuration options dependent on EXPERIMENTAL
|
2014-09-13 15:45:26 -06:00 |
|
Gregory Nutt
|
3fffd4affe
|
Update TODO list and README
|
2014-09-13 06:10:23 -06:00 |
|
Gregory Nutt
|
73de6e53c9
|
Fix one more dependency upon having a symbol table
|
2014-09-12 13:03:10 -06:00 |
|
Gregory Nutt
|
5527e0df9f
|
Misc fixes to repair some of the breakage to the SAMA5D4-EK elf configuration caused by changes for the knsh configuration
|
2014-09-11 10:31:12 -06:00 |
|
Gregory Nutt
|
a3e85c0b87
|
Update changelog
|
2014-09-09 13:54:56 -06:00 |
|
Gregory Nutt
|
f397eeaec4
|
SAMA5D4-EK kernel config can now boot from a ROMFS file system
|
2014-09-09 13:51:13 -06:00 |
|
Gregory Nutt
|
0e01bce287
|
Update README file
|
2014-09-08 16:00:57 -06:00 |
|
Gregory Nutt
|
8c7600687f
|
Rename SAMA5D4-EK kernel configuration to knsh for consistency with naming for other platforms
|
2014-09-08 11:05:05 -06:00 |
|
Gregory Nutt
|
3629b710ae
|
SAMA5D4-EK kernel configurations needs support for task termination clean-up
|
2014-09-06 14:40:39 -06:00 |
|
Gregory Nutt
|
a0fa9f87cf
|
SAMA5D4-EK kernel configuration now builds NSH instead of examples/elf
|
2014-09-06 07:04:14 -06:00 |
|
Gregory Nutt
|
c8da2db7be
|
SAMA5D4-EK: Add logic to mount an SD card as a boot device
|
2014-09-03 08:34:28 -06:00 |
|
Gregory Nutt
|
9f86485f98
|
SAMA5D4-EK: Add a configuration for testing the kernel build configuration (still a work in progress)
|
2014-08-31 11:08:49 -06:00 |
|
Gregory Nutt
|
8c3cf9e63f
|
Separate flat, protected, and kernel mode library selected into separate files. The conditional logic as exceed my able to comprehend and maintain the selections.
|
2014-08-30 10:43:58 -06:00 |
|
Gregory Nutt
|
0effe35910
|
Enable SYSCALL interface with address environments in the SAMA5D4-EK ELF configuration
|
2014-08-30 08:48:18 -06:00 |
|
Gregory Nutt
|
833e172b83
|
Update README file
|
2014-08-28 11:08:26 -06:00 |
|
Gregory Nutt
|
f8294d79aa
|
SAMA5 ELF configuration with address environments finally builds without errors
|
2014-08-25 13:59:02 -06:00 |
|
Gregory Nutt
|
77ebefb9cd
|
Misc changed to get the SAMA5 ELF configuration with address environments working
|
2014-08-25 13:28:13 -06:00 |
|
Gregory Nutt
|
db130b5ea9
|
After cached related fix, the ELF example is now functional
|
2014-08-24 14:12:45 -06:00 |
|
Gregory Nutt
|
d767c06085
|
Update README files, Kconfig help comments, and make the network monitor not EXPERIMENTAL
|
2014-08-18 07:24:47 -06:00 |
|
Gregory Nutt
|
04f59f1761
|
Update README files
|
2014-08-12 10:01:12 -06:00 |
|
Gregory Nutt
|
cff5132179
|
SAMA5: Enable the 32.768 crystal if SCHED_TICKLESS is selected
|
2014-08-11 14:29:43 -06:00 |
|
Gregory Nutt
|
86ebe4725b
|
Updated README files
|
2014-08-10 20:02:45 -06:00 |
|
Gregory Nutt
|
3985dc9120
|
Cosmetic changed, updated README files, improved comments
|
2014-08-10 13:11:31 -06:00 |
|
Gregory Nutt
|
9b76a1b758
|
Update README files
|
2014-08-10 11:34:20 -06:00 |
|
Gregory Nutt
|
6663d87227
|
Updated README
|
2014-08-06 12:30:35 -06:00 |
|
Gregory Nutt
|
8d13a7cfcd
|
WM8904: Update READMEs and defconfigs to last tested configuration
|
2014-08-04 15:36:16 -06:00 |
|
Gregory Nutt
|
2e77455c6f
|
SAMA5 SSC: Start Delay is now configurable
|
2014-08-01 14:10:37 -06:00 |
|
Gregory Nutt
|
67792ef05b
|
SAMA5 SSC: Frame Synch Delay is now configurable
|
2014-08-01 12:25:31 -06:00 |
|
Gregory Nutt
|
0fb3f7803c
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
Gregory Nutt
|
afff17a8ee
|
Add short document for running the NxWM demo
|
2014-07-31 08:18:07 -06:00 |
|
Gregory Nutt
|
7e4e5ee543
|
dd support for a USB keyboard as the NxConsole and text widget input. Not fully functional as of this initial check-in. Basic functionality is there, but there are conditions were the keyboard gets lost.
|
2014-07-30 17:01:51 -06:00 |
|
Gregory Nutt
|
40e27add0b
|
Costmetic: Update TODO list, README files, refreshed configuration, updated comments
|
2014-07-30 14:26:50 -06:00 |
|
Gregory Nutt
|
2b0c56a31d
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
df57bd319d
|
Updated README file, cosmetic changes to comments and debug output
|
2014-07-30 10:19:09 -06:00 |
|
Gregory Nutt
|
812db2e5ae
|
Update TODO listi and README
|
2014-07-29 20:02:34 -06:00 |
|
Gregory Nutt
|
47aa0e0baf
|
Cosmetic updates to comments and README files and some naming
|
2014-07-29 16:35:47 -06:00 |
|
Gregory Nutt
|
42b28ba383
|
SAMA5D4: Add auto-mounter support for HSMCI0
|
2014-07-29 15:34:31 -06:00 |
|
Gregory Nutt
|
d7432c4b07
|
Update ChangeLog
|
2014-07-29 12:52:21 -06:00 |
|
Gregory Nutt
|
e436b0bc96
|
Updated README
|
2014-07-25 10:03:01 -06:00 |
|
Gregory Nutt
|
d3eb13ed66
|
SAMA5D4-EK NSH: Enable the command line media player in the NSH configuration as well (still does not work, however).
|
2014-07-23 15:33:54 -06:00 |
|
Gregory Nutt
|
3e49c4c510
|
SAMA5D4 NxWM: Configuration now has the audio subsystem and the NxPlayer enabled
|
2014-07-23 15:20:54 -06:00 |
|
Gregory Nutt
|
8edc57137c
|
SAMA5D3/4: All configurations. I suspect a MMC/SD multi-block DMA transfer issue. So for name, this feature is disabled in all configurations
|
2014-07-23 07:58:10 -06:00 |
|
Gregory Nutt
|
36ae0dfa42
|
Update README
|
2014-07-22 09:25:38 -06:00 |
|
Gregory Nutt
|
1451690569
|
Updated README
|
2014-07-21 18:38:41 -06:00 |
|
Gregory Nutt
|
1518adff14
|
WM8904 w/NxPlayer: Fix some compile errors and warnings with debug enabled
|
2014-07-20 09:17:36 -06:00 |
|
Gregory Nutt
|
5abc23b0a8
|
The WM8904 audio driver is mostly code complete and ready to begin initial testing
|
2014-07-19 18:52:58 -06:00 |
|
Gregory Nutt
|
f240f7e513
|
SAMA5: Add slow clock support
|
2014-07-19 13:07:55 -06:00 |
|
Gregory Nutt
|
414fb2b154
|
SAMA5D4-EK: Add WM8904 initialization logic
|
2014-07-19 11:58:53 -06:00 |
|
Gregory Nutt
|
17fdc797ed
|
WM8904: A few initial definitions for for the SAMA5D4-EK
|
2014-07-17 17:57:57 -06:00 |
|
Gregory Nutt
|
bb6ba5198b
|
Rename CONFIG_NX_MOUSE to CONFIG_NX_INPUT, then add CONFIG_NX_XYINPUT_MOUSE and CONFIG_XYINPUT_TOUCHSCREEN
|
2014-07-16 16:31:31 -06:00 |
|
Gregory Nutt
|
b039f76778
|
Minor update to README
|
2014-07-13 18:22:34 -06:00 |
|
Gregory Nutt
|
6298ead42c
|
SAMA5D4-EK LCDC: Change source clock to 2*Mck seems to solve stability issues
|
2014-07-12 09:45:05 -06:00 |
|
Gregory Nutt
|
0222f5816f
|
Fixes for clean NxWM build; Updated README files
|
2014-07-10 15:29:41 -06:00 |
|
Gregory Nutt
|
06f8b5a613
|
Update README's to document the new SAMA5D4-EK NxWM configuration
|
2014-07-10 14:10:36 -06:00 |
|
Gregory Nutt
|
c99dcd9da3
|
SAMA5D4-EK: Add an NxWM configuration
|
2014-07-10 14:00:56 -06:00 |
|
Gregory Nutt
|
41c1135531
|
SAMA5D4-EK: The NX graphics example is now enabled by default
|
2014-07-10 12:38:18 -06:00 |
|
Gregory Nutt
|
ad3542ad95
|
SAMA5D4-EK: LCDC works (with a few color problems)
|
2014-07-10 12:03:10 -06:00 |
|
Gregory Nutt
|
f694e10be6
|
SAMA5D4-EK: The maXTouch controller and test is now enabled by default in the NSH configuration
|
2014-07-10 08:42:25 -06:00 |
|
Gregory Nutt
|
94ed3a6f51
|
SAMA5D4-EK: Add options to support an LCD
|
2014-07-08 12:46:18 -06:00 |
|
Gregory Nutt
|
620cb9463a
|
SAMA5D4-EK: Add the button test to the NSH configuration
|
2014-07-07 17:06:25 -06:00 |
|
Gregory Nutt
|
a60dd173a9
|
SAMAa5D4-EK: Updated README
|
2014-07-06 09:43:26 -06:00 |
|
Gregory Nutt
|
5e98d5d2e8
|
SAMA5D4-EK: Add board support for the maXTouch
|
2014-07-05 17:12:14 -06:00 |
|
Gregory Nutt
|
fd3bd32330
|
NSH Keyboard: Close stdin before trying to reopen. Otherwise, driver will persist
|
2014-07-03 17:08:59 -06:00 |
|
Gregory Nutt
|
34cba9b5dc
|
NSH: Add an option to take stdin from a USB keyboard device
|
2014-07-03 16:25:02 -06:00 |
|
Gregory Nutt
|
73ed49fe06
|
SAMA5D4-EK: Add support for USB host
|
2014-07-03 11:22:15 -06:00 |
|
Gregory Nutt
|
f444bf41de
|
Merge remote-tracking branch 'origin/master' into netiob
|
2014-07-02 16:05:32 -06:00 |
|
Gregory Nutt
|
285f66a2c1
|
NET: Rename uiplib/UIPLIB to netlib/NETLIB
|
2014-07-02 16:04:25 -06:00 |
|
Gregory Nutt
|
c42a44be72
|
SAMA5D4-EK: NSH should run at 528MHz
|
2014-07-02 15:31:52 -06:00 |
|
Gregory Nutt
|
6c3f159e5f
|
SAMA5D4-EK: NSH configuration now has TWI0 enabled and supports the I2C tool
|
2014-07-02 13:51:57 -06:00 |
|
Gregory Nutt
|
5c459dd0e3
|
SAMA5D3-EK: Enable the procfs file system in the NSH configuration
|
2014-07-02 13:08:39 -06:00 |
|
Gregory Nutt
|
c95a5924c9
|
SAMA5D4 EMAC: Add a kludge to work around a suspected hardware issue
|
2014-07-02 12:17:01 -06:00 |
|
Gregory Nutt
|
846a5796c4
|
SAMA5D4-EK: NSH configuration now has the RAMLOG enabled by default
|
2014-07-01 15:09:47 -06:00 |
|
Gregory Nutt
|
3286fd69fe
|
Cosmetic changes, updates to README files, updates to some comments
|
2014-06-30 17:52:59 -06:00 |
|
Gregory Nutt
|
1bfcf7b764
|
Fix typo/compile error introduced with last HSMCI changes
|
2014-06-30 16:08:29 -06:00 |
|
Gregory Nutt
|
4af35bdc95
|
SAM3/4: Important bugfix. Values read from PIO input pins do not change unless clocking to the PIO block is enabled
|
2014-06-30 14:26:09 -06:00 |
|
Gregory Nutt
|
88953d95f7
|
SAMA5D4-EK: Fix HSMCI card-detect pin selections
|
2014-06-29 11:26:41 -06:00 |
|
Gregory Nutt
|
b7bfb1f632
|
SAMA5D: Don't use explicit DMACH_FLAG_MEMPID_SHIFT; it does not exist in the SAMA5D4
|
2014-06-29 09:52:07 -06:00 |
|
Gregory Nutt
|
d8c119fa54
|
Updated ChangeLog
|
2014-06-29 09:36:15 -06:00 |
|