Using the ts/tick conversion functions provided in clock.h
Do this caused we want speed up the time calculation, so change:
clock_time2ticks, clock_ticks2time, clock_timespec_add,
clock_timespec_compare, clock_timespec_subtract... to MACRO
Signed-off-by: ligd <liguiding1@xiaomi.com>
Add new driver frameworks: force feedback for vibrator, like linux,
unify vendor vibrator driver using.
Incorporating a force feedback-based driving framework to replace the
conventional driver/motor setup for controlling vibrators not only
enhances the precision and responsiveness of the haptic feedback but
also aligns better with the advancements in Linux-based driver systems.
refs docs link: https://www.kernel.org/doc/html/v4.19/input/ff.html
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
1. Should check the vmid in ivshmem_remove() when release irq instead
check the ivdev->reg;
2. Add vmid check in ivshmem_probe() because ivshmem driver only support
vmid == 0 or 1 for now in NuttX;
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Add common ivshmem driver, provide the ivshmem bus mechisam, so
many ivshmem based driver can change to pci_ivshmem based
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Rptun is a rptun fremework driver base on the Inter-Virtual Machine
Share Memory Device.
With this driver, two NuttX runs in different QEMU can communicate
with each other by the rpmsg api.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
We can see them in ifconfig:
ap> ifconfig
wlan0 Link encap:Ethernet HWaddr 42:64:7f:b3:12:03 at UP mtu 1500
inet addr:10.0.1.2 DRaddr:10.0.1.1 Mask:255.255.255.0
inet6 DRaddr: ::
RX: Received Fragment Errors Bytes
00000b9b 00000000 00000000 21daf5
IPv4 IPv6 ARP Dropped
00000a33 00000137 00000031 00000000
TX: Queued Sent Errors Timeouts Bytes
00000ac4 00000ac4 00000000 00000000 1a2103
Total Errors: 00000000
Signed-off-by: meijian <meijian@xiaomi.com>
Coredump need call the block read/write ops in interrupt
Not consider the ops called in thread and intterupt simultaneously.
Only used for coredump now.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
because if priv->rx_length is zero , need to call SPIS_CTRLR_QPOLL to
receive new data from lower half and update priv->rx_length.
This reverts commit 6cb649ecf6.
Basic amg88xx sensor handling (open, close, read, ioctl).
No interrupts supported. I intend to add support for this feature when I
gain more know-how on nuttx/posix.
In some usage scenarios, read and write tasks will be performed during interruptions. If sleep is used at this time, it will cause a timeout crash. Therefore, a macro is added to determine whether it is currently interrupted to select sleep/delay.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Change the qmeu pci test code for new pci driver framework
Signed-off-by: yangshuyong <yangshuyong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Signed-off-by: lipengfei28 <lipengfei28@xiaomi.com>
Make this_cpu is arch independent and up_cpu_index do that.
In AMP mode, up_cpu_index() may return the index of the physical core.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
Some USB controllers can receive or send multiple data packets then
generate one interrupt. This mechanism can reduce the number of data
copies. Extend req buf to accommodate this.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
"ioexpander/gpio.c", line 529: warning #186-D: pointless comparison of
unsigned integer with zero
if (pintype < GPIO_INPUT_PIN || pintype >= GPIO_NPINTYPES)
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
Add TUNSETCARRIER ioctl, then we may change the carrier state of TUN dynamically. Note that we don't need an ioctl for getting carrier, it can be done by SIOCGIFFLAGS already.
Ref: https://github.com/torvalds/linux/blob/v6.10/drivers/net/tun.c#L3374-L3380
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
If failed in pty_register2, it is possible to enter unregister_driver
function, which eventually calls ptmx_minor_free, resulting in mutex
conflict.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
CC: irq/irq_initialize.c "ioexpander/gpio.c", line 386: warning #188-D: enumerated type mixed with
another type
*ptr = dev->gp_pintype;
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
"net/netdev_upperhalf.c", line 133: warning #188-D: enumerated type mixed with
another type
total += netdev_lower_quota_load(lower, type);
CC: dirent/lib_alphasort.c "spi/spi_transfer.c", line 83: warning #188-D: enumerated type mixed with
another type
SPI_SETMODE(spi, seq->mode);
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
if dev->d_flags is POLICY_1, the circbuf cannot be initialized incorrectly.
We determine whether the circbuf should be initialized based on first reference on device and d_buffer is NULL
Signed-off-by: wangchen <wangchen41@xiaomi.com>
From the current implementation,udp localsoket receiver's pipe is closed, the sender write failed in the pipe;
we change the implementation to check if buffer is free(PIPE_IS_POLICY_0),if not free,the sender could write in the pipe;
From the current implementation,udp localsoket sender's pipe is empty,the recevier directly return end of file;
we change the implementation to check if buffer is free(PIPE_IS_POLICY_0),if not free,the receiver wait for data
Signed-off-by: wangchen <wangchen41@xiaomi.com>
thread1 thread2
open pipe open pipe
close()
-> pipecommon_close()
-> check inode refs
-> do NOT free dev close()
-> pipecommon_close()
-> check inode refs
-> do NOT free dev
-> inode_release
inode refs--
-> inode_release
inode refs--
Then, you will see the pipe hasn't free its resource, memleak
Resolve:
replace the inode refs with priv refs
Signed-off-by: ligd <liguiding1@xiaomi.com>
Some macro definitions have already been defined in other header files, redundant macro definitions have been removed in include/nuttx/can.h. Align some code. Remove no use struct (can_response_s) and some variables.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
