N/A
cu_main.c:172:22: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
by asan
Change-Id: I224345bddb11523db0c4a91c16617a3200fad034
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
N/A
specified the name of remote proc(rpmsg server)
Change-Id: Ie270d651071e87a40a80ab489597ae18db9814f0
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Summary:
- Since binding to a local port is not necessary in TCP mode,
it should be done only in UDP mode
Impact:
- None
Testing:
- Tested with NFS server on Ubuntu 18.04 (x86_64)
- Tested with spresense:rndis (defconfig will be updated later)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that receiving a read large packet (e.g. 2KB) in TCP
mode does not work correctly
- Actually, rpcclnt_receive() only received up to MSS
- This commit fixes this issue
Impact:
- TCP mode only
Testing:
- Tested with Ubuntu 18.04 (x86_64)
- Tested with spresense:rndis (defconfig will be updated later)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that NFS over TCP does not work with Ubuntu 18.04
- Finally, I found that the record marking packet should not
be sent separately
- This commit fixes this issue
Impact:
- TCP mode only
Testing:
- Tested with NFS server on Ubuntu 18.04 (x86_64)
- Tested with spresense:rndis (defconfig will be updated later)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
to avoid close the same handle twice because
the caller also call elf_uninit in this case
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Iddcbae9587d11d3b5b06e876d4a037ac0d11992e
since the console is normally opened three time as stdin, stdout and
stderr and remove the dependence on STANDARD_SERIAL because other type
of serial drivers also support the poll through the same codebase.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie68322c4647cc838b295491329969869d6ba310b
elf_init open a elf file , if both enabled
CONFIG_NSH_BUIlTAPPS and CONFIG_NSH_FILE_APPS ,
elf_init will read elf file in /bin directory, but
that length is zero , elf_read failed return and NOT
close elf fd, so this line MUST be return to errout_with_init
This is addressing an issue where Rx interrupts were not restored for
cdcacm after the buffer had been filled (in a burst).
The Rx interrupts were only restored after the watchdog timeout of 200ms
fired.
This happened because CONFIG_SERIAL_RXDMA was set, however, for the
cdcacm driver this does not actually matter as it is relying on
uart_enablerxint to be called via the ops table.
This patch makes sure that uart_enablerxint and uart_disablerxint are
always called, independent of CONFIG_SERIAL_RXDMA, relying on the ops
table to be correct for the case where it should be only a no-op.
