Matias N a9d8b705cc drivers/usbdev/cdcacm.c: This fixes a problem where the host sent a "get descriptor" message of type "standard" with a recipient of type "interface". Since the composite driver would only pass messages to the child interfaces when a message was not "standard", this message was not handled. I changed the condition so that the composite driver checks not only if this is a "standard" message but if it is also directed to the device. Otherwise, the handling is delegated to the children of the composite device.

2019-03-26 21:54:01 -06:00

..

cdcacm_desc.c

Cosmetic spacing and used UNUSEd macro

2017-11-09 12:25:13 -06:00

cdcacm.c

drivers/usbdev/cdcacm.c: When implemented usb cdc on nrf52840, I found some issues with cdc driver.

2019-01-02 07:49:21 -06:00

cdcacm.h

drivers/usbdev: Add support for RX flow control to the CDC/ACM driver.

2017-09-22 14:01:00 -06:00

cdcecm.c

All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences.

2018-11-21 07:57:26 -06:00

cdcecm.h

drivers/usbdev/cdcecm.c: Adds USB Device Support for CDC/ECM

2018-08-16 08:49:11 -06:00

composite_desc.c

USB device: Rename usbdev_description_s to usbdev_devinfo_s to avoid any more confusion of naming with device descriptions in the future. Instances of usbdev_devinfo_s are now called devinfo vs devdesc when is a bad naming collision.

2017-07-20 09:34:48 -06:00

composite.c

drivers/usbdev/cdcacm.c: This fixes a problem where the host sent a "get descriptor" message of type "standard" with a recipient of type "interface". Since the composite driver would only pass messages to the child interfaces when a message was not "standard", this message was not handled. I changed the condition so that the composite driver checks not only if this is a "standard" message but if it is also directed to the device. Otherwise, the handling is delegated to the children of the composite device.

2019-03-26 21:54:01 -06:00

composite.h

Squashed commit of the following:

2017-07-24 16:46:30 -06:00

dfu.c

Updates from coding standard review of PRs 753 and 754

2018-11-09 07:44:22 -06:00

Kconfig

Merged in raiden00/nuttx_h7 (pull request #837)

2019-03-10 13:24:58 +00:00

Make.defs

NuttX: Add DFU Runtime driver for activating bootloader through USB command.

2018-11-09 14:11:31 +02:00

pl2303.c

Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES

2016-06-11 14:14:08 -06:00

rndis_std.h

Remove trailing spaces at the end of lines.

2018-08-13 07:39:38 -06:00

rndis.c

Updates from coding standard review of PRs 753 and 754

2018-11-09 07:44:22 -06:00

usbdev_strings.c

drivers/usbdev: Add support for RX flow control to the CDC/ACM driver.

2017-09-22 14:01:00 -06:00

usbdev_trace.c

Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required.

2018-03-04 08:07:07 -06:00

usbdev_trprintf.c

drivers/usbdev: Add support for RX flow control to the CDC/ACM driver.

2017-09-22 14:01:00 -06:00

usbmsc_desc.c

Cosmetic spacing and used UNUSEd macro

2017-11-09 12:25:13 -06:00

usbmsc_scsi.c

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

usbmsc.c

Fix some typographical errors.

2018-09-14 06:55:45 -06:00

usbmsc.h

Remove trailing spaces at the end of lines.

2018-08-13 07:39:38 -06:00