nuttx/configs/stm3210e-eval/RIDE
patacongo 34b7ebdf68 Move serial header files to include/nuttx/serial
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4500 42af7a65-404d-4744-a932-0658087f49c3
2012-03-21 19:47:23 +00:00
..
appconfig Remove .built_always 2011-04-01 14:30:43 +00:00
bigfatstub.c Missed uint32 type conversions 2009-12-17 18:47:48 +00:00
defconfig Add support for C++ static constructors (at least to a few platforms) 2012-02-28 21:58:24 +00:00
Make.defs Fixes from last changes when built with CodeSourcery, STM32, LCD, 16-bit color 2011-10-25 01:02:49 +00:00
nuttx.ctx Basic USART setup works 2009-10-11 19:52:20 +00:00
nuttx.dbi Don't discard unused sections 2009-10-11 15:16:03 +00:00
nuttx.elf.ld Don't discard unused sections 2009-10-11 15:16:03 +00:00
nuttx.rapp Name change: Change Cortex-M3 naming to ARMv7-M naming so support Cortex-M4 2011-08-05 21:57:49 +00:00
nuttx.rdb Move serial header files to include/nuttx/serial 2012-03-21 19:47:23 +00:00
nuttx.rprj Started a RIDE project for STM32 2009-10-04 17:48:35 +00:00
README.txt This project actually builds 2009-10-11 14:23:23 +00:00
setenv.sh update 2009-10-11 13:59:52 +00:00
stm32-ld.sh Don't discard unused sections 2009-10-11 15:16:03 +00:00
stm32-nuttx.ld Don't discard unused sections 2009-10-11 15:16:03 +00:00

README
------

This directory contains a simple RIDE7 project used to bring up the
STM3210E-EVAL board.  This project includes only the STM32 boot-up
code under arch/arm/src and configs/stm3210e-eval/src plus as little
additional environmental support as necessary.

bigfatstub.c

  The NuttX OS is not included in this project.  This file contains
  stubs for all of the NuttX entry points and this replaces NuttX

Make.defs, defconfig, setenv.h

  The first step to using this RIDE project is to build a compatible
  cygwin project.  This will set up of the directories and produce
  all of the necessary autogenerated files.

    cd tools
    ./configure.sh stm3210e-eva/RIDE
    cd ..
    . ./setenv.sh
    make

nuttx.*

  RIDE7 project files
  
stm32-nuttx.ld

  This is the linker script that replaces the RIDE7 linker script.

stm32-ld.sh

  This is a shell script that will use the RIDE7 tools to relink the
  NuttX binaries.  Useful because RIDE7 does not provide much linker
  output to see what is going on.