nuttx

2016-09-20 08:04:32 -06:00

drivers/audio: Add Audio Tone Generator for NuttX

2016-08-16 13:20:05 -06:00

Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier

2015-12-13 08:10:01 -06:00

contactless

Fix some comments in header files

2016-08-31 13:34:52 -06:00

crypto

Modifications to the crypto API needed for LPC43xx.

2016-05-23 08:05:02 -06:00

drivers

Change the way that contactless IOCTL commands are defined. All IOCTL commands must be unique.

2016-08-31 11:30:22 -06:00

eeprom

…

fs

include/nuttx/fs/nxffs.h: Needs forward reference to struct mtd_dev_s and needs to include stdbool.h

2016-10-09 14:07:19 -06:00

i2c

Changes from review of PR 114

2016-08-14 13:38:47 -06:00

input

Correct typo in comments

2016-10-11 14:13:28 -06:00

ioexpander

Fix names of pre-processor variables used in header file idempotence

2016-08-06 19:21:42 -06:00

lcd

correct logic hazard in latch and load nybble; was transitioning control lines at the same time as enable, causing spurious behaviour on less-tolerant displays

2016-05-29 11:09:00 -05:00

leds

pwm.h moved from include/nuttx/ to include/nuttx/drivers.

2016-07-20 13:48:24 -06:00

lib

Make xorshift128 re-entrant so that we do do have to suffer the overhad of serialization controls.

2016-08-21 07:47:53 -06:00

mm

Add _ to the beginning of all debug macros to avoid name collisions

2016-06-16 12:33:32 -06:00

modem

include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique

2016-09-16 09:39:51 -06:00

mtd

MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F.

2016-09-02 11:00:04 -06:00

net

Kinetis Ethernet: Add support for the KSZ8081 PHY

2016-07-12 09:59:08 -06:00

nx

NX: Add configurable callout to external logic to handle display update events

2016-04-17 11:57:43 -06:00

power

Fix names of pre-processor variables used in header file idempotence

2016-08-06 19:21:42 -06:00

sensors

drivers/sensors: Adds support for the Sensixs XEN1210 3D-boar. This sensor is used on NANOSATC-BR2 a Brazillian CUBESAT project.

2016-09-16 12:45:53 -06:00

sercomm

Fix names of pre-processor variables used in header file idempotence

2016-08-06 19:21:42 -06:00

serial

PTY: Add TERMIOS support.

2016-07-16 10:43:44 -06:00

spi

contactless: spi device

2016-08-31 13:22:10 +02:00

syslog

Add a SYSLOG character device that can be used to re-direct output to the SYSLOG

2016-07-05 12:58:18 -06:00

timers

oneshot interface: max_delay method should return time in a standard struct timespec form.

2016-08-12 11:33:10 -06:00

usb

Fix C99 style comment

2016-08-26 08:28:54 -06:00

video

Fix names of pre-processor variables used in header file idempotence

2016-08-06 19:21:42 -06:00

wireless

Move contactless drivers to their own directory

2016-08-31 13:08:58 +02:00

.gitignore

…

addrenv.h

…

arch.h

Fix a cloned typo

2016-10-19 09:14:21 -06:00

ascii.h

ASCII: Improve some naming

2016-04-14 16:20:36 -06:00

board.h

Add an argument to board_app_initialize()

2016-05-24 10:51:22 -06:00

clock.h

sched/sched_cpuload_oneshot: Use the oneshot timer with optional entropy to measuer cPU load if so configured.

2016-08-20 12:47:07 -06:00

compiler.h

Update compiler.h to support IAR compiler

2016-04-02 06:24:36 -06:00

init.h

enter/leave_critical_section: In SMP configuration, may attempt to access the task lists before they have been initialized

2016-05-18 09:17:01 -06:00

irq.h

Scheduler instrumentation: Fix some associated with monitoring critical sections

2016-03-21 17:08:07 -06:00

kmalloc.h

Performance improvement: Idle loop should not take MM semaphore if there is not garbage to be collected. This can cause loss of performance and thrashing in tasking

2016-02-16 19:33:22 -06:00

kthread.h

…

mmcsd.h

Remove the final vestiges of up_spiinitialize()

2016-01-27 09:27:56 -06:00

module.h

Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier

2015-12-13 08:10:01 -06:00

mqueue.h

Fix an error when a task with open message queue descriptors is killed via task_delete(). Noted by Anton Gropyanov.

2016-04-11 11:14:18 -06:00

page.h

…

pgalloc.h

…

poff.h

Fix names of pre-processor variables used in header file idempotence

2016-08-06 19:21:42 -06:00

progmem.h

…

pthread.h

Add a CPU affinity set to the TCB if SMP is enable and use this CPU set as a mask for determining which CPUs the thread may run on. Add an affinity field to the attrributes to permit controlling which CPUs a pthread may run on. Implements pthread_att_setaffinity_np() and pthread_attr_getaffinity_np().

2016-02-19 17:33:35 -06:00

sched_note.h

Add task state to information recorded when a task is suspended

2016-03-21 15:24:15 -06:00

sched.h

sched/pthread and task: When a pthread is started, there is a small bit of logic that will run on the thread of execution of the new pthread. In the case where the new pthread has a lower priority than the parent thread, then this could cause both the parent thread and the new pthread to be blocked at the priority of the lower priority pthread (assuming that CONFIG_PRIORITY_INHERITANCE is not selected).

2016-10-01 11:38:22 -06:00

scsi.h

…

sdio.h

…

semaphore.h

Update some comments

2016-03-06 13:50:26 -06:00

signal.h

signals: Adds a very limited, minimal implementation for SIGEV_THREAD

2015-12-30 15:01:14 -06:00

spawn.h

…

spinlock.h

Add xtensa_testset.c

2016-10-19 09:58:12 -06:00

streams.h

Fix names of pre-processor variables used in header file idempotence

2016-08-06 19:21:42 -06:00

symtab.h

Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier

2015-12-13 08:10:01 -06:00

time.h

…

tls.h

TLS: Simplify

2016-03-11 07:17:32 -06:00

tree.h

…

userspace.h

…

vt100.h

…

wdog.h

The delay parameter has 'int' type while explicit int32_t is used in sigtimedwait() (sig_timedwait.c) This can lead to wrong argument for systems that have default int size different than int32 (namely AVR).

2016-01-05 07:58:04 -06:00

wqueue.h

Update to use 64-bit timer when available

2016-01-21 11:54:26 -06:00

zoneinfo.h

Move the TZ/Olson zoneinfo data set from apps/system/zoneinfo to libc/zoneinfo

2016-06-30 15:40:37 -06:00