nuttx/include/nuttx
2017-05-05 12:50:34 -06:00
..
analog Merged in raiden00/nuttx (pull request #338) 2017-05-02 13:57:56 +00:00
audio Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
binfmt Fix a number of header files with mismatched 'extern C {' and '}' 2016-11-05 07:25:05 -06:00
contactless Add an instance argument to the SPIDEV definitions. 2017-04-29 12:26:52 -06:00
crypto Add entropy pool and strong random number generator 2017-03-30 07:38:37 -06:00
drivers Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
eeprom Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet 2014-12-05 09:13:34 -06:00
fs 6loWPAN: Some fixed to get a clean compile after last big changes to the radio IOCTLs. 2017-05-05 10:00:18 -06:00
i2c Changes from review of PR 114 2016-08-14 13:38:47 -06:00
input Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported. 2017-04-09 07:22:49 -06:00
ioexpander Fix names of pre-processor variables used in header file idempotence 2016-08-06 19:21:42 -06:00
lcd memlcd: Mark Schulte <mark@mjs.pw> 2017-03-01 08:52:58 -06:00
leds pwm.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:48:24 -06:00
lib Shared Libs: Implement module based shared libraries for the PROTECTED mode build 2017-01-29 13:03:53 -06:00
mm Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
modem include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique 2016-09-16 09:39:51 -06:00
mtd MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F. 2016-09-02 11:00:04 -06:00
net 6loWPAN: Use information in struct ieee802154_data_ind_s when reassembling a packet 2017-05-05 11:36:16 -06:00
nx NX server: Correct message queue names. Should not be at /dev, but rather relative to /var/mqueue. 2017-01-08 09:14:11 -06:00
power Fix names of pre-processor variables used in header file idempotence 2016-08-06 19:21:42 -06:00
sensors ieee802.11: Bring some BSD licensed header files in from FreeBSD. 2017-04-30 17:40:10 -06:00
serial PTY: Add TERMIOS support. 2016-07-16 10:43:44 -06:00
spi Update a README and some comments. 2017-04-29 15:53:23 -06:00
syslog Add a SYSLOG character device that can be used to re-direct output to the SYSLOG 2016-07-05 12:58:18 -06:00
timers RTC: add interface for check if RTC time has been set 2017-04-06 09:53:11 -06:00
usb drivers/usbmisc: Add driver for Fairchild FUSB301 USB type-C controller. 2017-03-31 06:35:36 -06:00
video Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
wireless ieee 802.15.4: Add a pool-based memory allocator for RX frame meta-data. 2017-05-05 12:50:34 -06:00
.gitignore
addrenv.h
arch.h clock: add clock_resynchronize and use subseconds RTC 2017-04-21 08:45:57 -06:00
ascii.h ASCII: Improve some naming 2016-04-14 16:20:36 -06:00
board.h Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set. 2017-04-09 14:44:49 -06:00
cancelpt.h Move cancellation point definitions to their own header file. 2016-12-10 09:08:26 -06:00
clock.h Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
compiler.h Add ffsl(), ffsll(), fls(), flsl(), flsll() and use GCC's __builtin_ctz/__builtin_clz for faster implementation of these 2017-03-24 09:41:31 -06:00
init.h enter/leave_critical_section: In SMP configuration, may attempt to access the task lists before they have been initialized 2016-05-18 09:17:01 -06:00
irq.h Add missing endif 2017-03-03 14:39:35 -06:00
kmalloc.h Performance improvement: Idle loop should not take MM semaphore if there is not garbage to be collected. This can cause loss of performance and thrashing in tasking 2016-02-16 19:33:22 -06:00
kthread.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
mmcsd.h Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
module.h Module names are not needed in libc/modlib when the module library is used only for shared library support. 2017-01-29 12:23:24 -06:00
mqueue.h Fix an error when a task with open message queue descriptors is killed via task_delete(). Noted by Anton Gropyanov. 2016-04-11 11:14:18 -06:00
page.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
pgalloc.h Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
poff.h Fix names of pre-processor variables used in header file idempotence 2016-08-06 19:21:42 -06:00
progmem.h drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h 2015-11-12 13:40:18 -06:00
pthread.h Move cancellation point definitions to their own header file. 2016-12-10 09:08:26 -06:00
random.h Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
sched_note.h Update ChangeLog in prep for 7.20 release. 2017-03-08 10:09:48 -06:00
sched.h sched: Fix CHILD_FLAG_EXITED in include/nuttx/sched.h 2017-04-24 15:08:39 +09:00
scsi.h Clean up and review of header files for conformance to standards 2015-06-12 19:26:01 -06:00
sdio.h photon: porting wlan device 2017-03-14 21:13:36 +01:00
semaphore.h Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
signal.h signals: Adds a very limited, minimal implementation for SIGEV_THREAD 2015-12-30 15:01:14 -06:00
spawn.h
spinlock.h SMP: There were certain conditions that we must avoid by preventing releasing the pending tasks while withn a critical section. But this logic was incomplete; there was no logic to prevent other CPUs from adding new, running tasks while on CPU is in a critical section. 2016-12-27 08:49:07 -06:00
streams.h setvbuf: Add support for configuration of line buffering. 2017-02-08 11:28:24 -06:00
symtab.h Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier 2015-12-13 08:10:01 -06:00
time.h Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
tls.h TLS: Simplify 2016-03-11 07:17:32 -06:00
tree.h
userspace.h Protected mode: Redesign how the user space heap is accessed from the kernel code. It used to call memory management functions in user space via function pointers in the userspace interface. That is inefficient because the first thing that those memory management functions do is to trap back into the kernel to get the current PID. Worse, that operation can be fatal is certain fragile situations such as when a task is exitting. 2015-07-10 08:37:02 -06:00
vt100.h Add ANSI/VT100 color codes 2014-11-10 15:10:57 -06:00
wdog.h Update some wdog-related comments 2017-02-24 10:58:37 -06:00
wqueue.h Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
zoneinfo.h Move the TZ/Olson zoneinfo data set from apps/system/zoneinfo to libc/zoneinfo 2016-06-30 15:40:37 -06:00