nuttx/configs/samv71-xult/include/board.h

235 lines
8.5 KiB
C

/************************************************************************************
* configs/samv71-xult/include/board.h
*
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_SAMV71_XULT_INCLUDE_BOARD_H
#define __CONFIGS_SAMV71_XULT_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* After power-on reset, the SAMV71Q device is running out of the Master Clock using
* the Fast RC Oscillator running at 4 MHz.
*
* MAINOSC: Frequency = 12MHz (crystal)
*
* 300MHz Settings:
* PLLA: PLL Divider = 1, Multiplier = 20 to generate PLLACK = 240MHz
* Master Clock (MCK): Source = PLLACK, Prescalar = 1 to generate MCK = 120MHz
* CPU clock: 120MHz
*
*/
/* Main oscillator register settings.
*
* The main oscillator could be either the embedded 4/8/12 MHz fast RC oscillators
* or an external 3-20 MHz crystal or ceramic resonator. The external clock source
* is selected by default in sam_clockconfig.c. Here we need to specify the main
* oscillator start-up time.
*
* REVISIT... this is old information:
* The start up time should be should be:
*
* Start Up Time = 8 * MOSCXTST / SLCK = 56 Slow Clock Cycles.
*/
#define BOARD_CKGR_MOR_MOSCXTST (62 << PMC_CKGR_MOR_MOSCXTST_SHIFT) /* Start-up Time */
/* PLLA configuration.
*
* Divider = 1
* Multiplier = 25
*
* Yields:
*
* PLLACK = 25 * 12MHz / 1 = 300MHz
*/
#define BOARD_CKGR_PLLAR_STMODE PMC_CKGR_PLLAR_STMODE_FAST
#define BOARD_CKGR_PLLAR_COUNT (63 << PMC_CKGR_PLLAR_COUNT_SHIFT)
#define BOARD_CKGR_PLLAR_MUL PMC_CKGR_PLLAR_MUL(25)
#define BOARD_CKGR_PLLAR_DIV PMC_CKGR_PLLAR_DIV_BYPASS
/* PMC master clock register settings.
*
* BOARD_PMC_MCKR_CSS - The source of main clock input. This may be one of:
*
* PMC_MCKR_CSS_SLOW Slow Clock
* PMC_MCKR_CSS_MAIN Main Clock
* PMC_MCKR_CSS_PLLA PLLA Clock
* MC_MCKR_CSS_UPLL Divided UPLL Clock
*
* BOARD_PMC_MCKR_PRES - Source clock pre-scaler. May be one of:
*
* PMC_MCKR_PRES_DIV1 Selected clock
* PMC_MCKR_PRES_DIV2 Selected clock divided by 2
* PMC_MCKR_PRES_DIV4 Selected clock divided by 4
* PMC_MCKR_PRES_DIV8 Selected clock divided by 8
* PMC_MCKR_PRES_DIV16 Selected clock divided by 16
* MC_MCKR_PRES_DIV32 Selected clock divided by 32
* PMC_MCKR_PRES_DIV64 Selected clock divided by 64
* PMC_MCKR_PRES_DIV3 Selected clock divided by 3
*
* The prescaler determines (1) the CPU clock and (2) the input into the
* second divider that then generates the Master Clock (MCK). MCK is the
* source clock of the peripheral clocks.
*
* BOARD_PMC_MCKR_MDIV - MCK divider. May be one of:
*
* PMC_MCKR_MDIV_DIV1 Master Clock is Prescaler Output Clock / 1
* PMC_MCKR_MDIV_DIV2 Master Clock = Prescaler Output Clock / 2
* PMC_MCKR_MDIV_DIV4 Master Clock = Prescaler Output Clock / 4
* PMC_MCKR_MDIV_DIV3 Master Clock = Prescaler Output Clock / 3
*/
#define BOARD_PMC_MCKR_CSS PMC_MCKR_CSS_PLLA /* Source = PLLA */
#define BOARD_PMC_MCKR_PRES PMC_MCKR_PRES_DIV1 /* Prescaler = /1 */
#define BOARD_PMC_MCKR_MDIV PMC_MCKR_MDIV_DIV2 /* MCK divider = /2 */
/* USB clocking
* To be provided
*/
#define BOARD_PMC_MCKR_UPLLDIV2 0 /* UPLL clock not divided by 2 */
/* Resulting frequencies */
#define BOARD_MAINOSC_FREQUENCY (12000000) /* MAINOSC: 12MHz crystal on-board */
#define BOARD_PLLA_FREQUENCY (300000000) /* PLLACK: 25 * 12Mhz / 1 */
#define BOARD_CPU_FREQUENCY (300000000) /* CPU: PLLACK / 1 */
#define BOARD_MCK_FREQUENCY (150000000) /* MCK: PLLACK / 1 / 2 */
/* HSMCI clocking
*
* Multimedia Card Interface clock (MCCK or MCI_CK) is Master Clock (MCK)
* divided by (2*(CLKDIV+1)).
*
* MCI_SPEED = MCK / (2*(CLKDIV+1))
* CLKDIV = MCK / MCI_SPEED / 2 - 1
*
* Where CLKDIV has a range of 0-255.
*/
/* FLASH wait states.
*
* Wait states Max frequency at 105 centigrade (STH conditions)
*
* VDDIO
* 1.62V 2.7V
* --- ------- -------
* 0 26 MHz 30 MHz
* 1 52 MHz 62 MHz
* 2 78 MHz 93 MHz
* 3 104 MHz 124 MHz
* 4 131 MHz 150 MHz
* 5 150 MHz --- MHz
*/
#define BOARD_FWS 5
/* LED definitions ******************************************************************/
/* Button definitions ***************************************************************/
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: sam_ledinit, sam_setled, and sam_setleds
*
* Description:
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If
* CONFIG_ARCH_LEDS is not defined, then the following interfacesare available to
* control the LEDs from user applications.
*
************************************************************************************/
#ifndef CONFIG_ARCH_LEDS
void sam_ledinit(void);
void sam_setled(int led, bool ledon);
void sam_setleds(uint8_t ledset);
#endif
/************************************************************************************
* Name: sam_lcdclear
*
* Description:
* This is a non-standard LCD interface just for the SAM4e-EK board. Because
* of the various rotations, clearing the display in the normal way by writing a
* sequences of runs that covers the entire display can be very slow. Here the
* display is cleared by simply setting all GRAM memory to the specified color.
*
************************************************************************************/
#if defined(CONFIG_SAM4EEK_LCD_RGB565)
void sam_lcdclear(uint16_t color);
#else /* if defined(CONFIG_SAM4EEK_LCD_RGB24) defined(CONFIG_SAM4EEK_LCD_RGB32) */
void sam_lcdclear(uint32_t color);
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_SAMV71_XULT_INCLUDE_BOARD_H */