397 lines
17 KiB
C
397 lines
17 KiB
C
/****************************************************************************
|
||
* arch/mips/include/pic32mx/cp0.h
|
||
*
|
||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
*
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. Redistributions in binary form must reproduce the above copyright
|
||
* notice, this list of conditions and the following disclaimer in
|
||
* the documentation and/or other materials provided with the
|
||
* distribution.
|
||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||
* used to endorse or promote products derived from this software
|
||
* without specific prior written permission.
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
* POSSIBILITY OF SUCH DAMAGE.
|
||
*
|
||
****************************************************************************/
|
||
|
||
#ifndef __ARCH_MIPS_INCLUDE_PIC32MX_CP0_H
|
||
#define __ARCH_MIPS_INCLUDE_PIC32MX_CP0_H
|
||
|
||
/****************************************************************************
|
||
* Included Files
|
||
****************************************************************************/
|
||
|
||
#include <nuttx/config.h>
|
||
|
||
#include <arch/mips32/cp0.h>
|
||
|
||
/****************************************************************************
|
||
* Pre-Processor Definitions
|
||
****************************************************************************/
|
||
/* CP0 Register Addresses ***************************************************/
|
||
|
||
#ifdef __ASSEMBLY__
|
||
# define PIC32MX_CP0_HWRENA $7,0 /* Enables access via RDHWR hardware registers */
|
||
# define PIC32MX_CP0_BADVADDR $8,0 /* Address of most recent exception */
|
||
# define PIC32MX_CP0_COUNT $9,0 /* Processor cycle count */
|
||
# define PIC32MX_CP0_COMPARE $11,0 /* Timer interrupt control */
|
||
# define PIC32MX_CP0_STATUS $12,0 /* Processor status and control */
|
||
# define PIC32MX_CP0_INTCTL $12,1 /* Interrupt system status and control */
|
||
# define PIC32MX_CP0_SRSCTL $12,2 /* Shadow register set status and control */
|
||
# define PIC32MX_CP0_SRSMAP $12,3 /* Maps from vectored interrupt to a shadow set */
|
||
# define PIC32MX_CP0_CAUSE $13,0 /* Cause of last general exception */
|
||
# define PIC32MX_CP0_EPC $14,0 /* Program counter at last exception */
|
||
# define PIC32MX_CP0_PRID $15,0 /* Processor identification and revision */
|
||
# define PIC32MX_CP0_EBASE $15,1 /* Exception vector base register */
|
||
# define PIC32MX_CP0_CONFIG $16,0 /* Configuration register */
|
||
# define PIC32MX_CP0_CONFIG1 $16,1 /* Configuration register 1 */
|
||
# define PIC32MX_CP0_CONFIG2 $16,2 /* Configuration register 3 */
|
||
# define PIC32MX_CP0_CONFIG3 $16,3 /* Configuration register 3 */
|
||
# define PIC32MX_CP0_DEBUG $23,3 /* Debug control and exception status */
|
||
# define PIC32MX_CP0_DEPC $24,3 /* Program counter at last debug exception */
|
||
# define PIC32MX_CP0_ERREPC $30,3 /* Program counter at last error */
|
||
# define PIC32MX_CP0_DESAVE $31,3 /* Debug handler scratchpad register */
|
||
#endif
|
||
|
||
/* CP0 Registers ************************************************************/
|
||
|
||
/* Register Number: 0-6: Reserved
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
*/
|
||
|
||
/* Register Number: 7 Sel: 0 Name: HWREna
|
||
* Function: Enables access via the RDHWR instruction to selected hardware
|
||
* registers in non-privileged mode.
|
||
* Compliance Level: (Reserved for future extensions)
|
||
*/
|
||
|
||
#define CP0_HWRENA_SHIFT (0) /* Bits 0-3: Enable access to a hardware resource */
|
||
#define CP0_HWRENA_MASK (15 << CP0_HWRENA_SHIFT)
|
||
# define CP0_HWRENA_BIT0 (1 << CP0_HWRENA_SHIFT)
|
||
# define CP0_HWRENA_BIT1 (2 << CP0_HWRENA_SHIFT)
|
||
# define CP0_HWRENA_BIT2 (4 << CP0_HWRENA_SHIFT)
|
||
# define CP0_HWRENA_BIT3 (8 << CP0_HWRENA_SHIFT)
|
||
|
||
/* Register Number: 8 Sel: 0 Name: BadVAddr
|
||
* Function: Reports the address for the most recent address-related
|
||
* exception
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*
|
||
* Register Number: 9 Sel: 0 Name: Count
|
||
* Function: Processor cycle count
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*
|
||
* Register Number: 10 Reserved.
|
||
* Compliance Level: Required for TLB-based MMU; Optional otherwise.
|
||
*
|
||
* Register Number: 11 Sel: 0 Name: Compare
|
||
* Function: Timer interrupt control
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
/* Register Number: 12 Sel: 0 Name: Status
|
||
* Function: Processor status and control
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
* NOTES:
|
||
* 1. The following are reserved bits in the PIC32:
|
||
* CP0_STATUS_UX Bit 5: Enables 64-bit user address space (Not MIPS32)
|
||
* CP0_STATUS_SX Bit 6: Enables 64-bit supervisor address space (Not MIPS32)
|
||
* CP0_STATUS_KX Bit 7: Enables 64-bit kernel address space (Not MIPS32)
|
||
* CP0_STATUS_IMPL Bits 16-17: Implementation dependent
|
||
* CP0_STATUS_TS Bit 21: TLB detected match on multiple entries
|
||
* CP0_STATUS_PX Bit 23: Enables 64-bit operations (Not MIPS32)
|
||
* CP0_STATUS_MX Bit 24: Enables MDMX<4D> (Not MIPS32)
|
||
*/
|
||
|
||
#undef CP0_STATUS_UX
|
||
#undef CP0_STATUS_SX
|
||
#undef CP0_STATUS_KX
|
||
#undef CP0_STATUS_IMPL
|
||
#undef CP0_STATUS_IMPL_SHIFT
|
||
#undef CP0_STATUS_IMPL_MASK
|
||
#undef CP0_STATUS_TS
|
||
#undef CP0_STATUS_PX
|
||
#undef CP0_STATUS_MX
|
||
|
||
/* 2. The following field is of a different width. Apparently, it
|
||
* excludes the software interrupt bits.
|
||
*
|
||
* CP0_STATUS_IM Bits 8-15: Interrupt Mask
|
||
* Vs.
|
||
* CP0_STATUS_IPL Bits 10-15: Interrupt priority level
|
||
* Bitss 8-9 reserved
|
||
*/
|
||
|
||
#define CP0_STATUS_IPL_SHIFT (10) /* Bits 10-15: Interrupt priority level */
|
||
#define CP0_STATUS_IPL_MASK (0x3f << CP0_STATUS_IPL_SHIFT)
|
||
|
||
/* 3. Supervisor mode not supported
|
||
* CP0_STATUS_KSU Bits 3-4: Operating mode (with supervisor mode)
|
||
*/
|
||
|
||
#undef CP0_STATUS_KSU_SHIFT
|
||
#undef CP0_STATUS_KSU_MASK
|
||
#undef CP0_STATUS_KSU_KERNEL
|
||
#undef CP0_STATUS_KSU_SUPER
|
||
#undef CP0_STATUS_KSU_USER
|
||
|
||
/* Register Number: 12 Sel: 1 Name: IntCtl */
|
||
|
||
#define CP0_INTCTL_VS_SHIFT (5) /* Bits 5-9: Vector spacing bits */
|
||
#define CP0_INTCTL_VS_MASK (0x1f << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_0BYTES (0x00 << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_32BYTES (0x01 << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_64BYTES (0x02 << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_128BYTES (0x04 << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_256BYTES (0x08 << CP0_INTCTL_VS_SHIFT)
|
||
# define CP0_INTCTL_VS_512BYTES (0x10 << CP0_INTCTL_VS_SHIFT)
|
||
|
||
/* Register Number: 12 Sel: 2 Name: SRSCtl */
|
||
|
||
#define CP0_SRSCTL_CSS_SHIFT (0) /* Bits 0-3: Current shadow bit set */
|
||
#define CP0_SRSCTL_CSS_MASK (15 << CP0_SRSCTL_CSS_SHIFT)
|
||
#define CP0_SRSCTL_PSS_SHIFT (6) /* Bits 6-9: Previous shadow set */
|
||
#define CP0_SRSCTL_PSS_MASK (15 << CP0_SRSCTL_PSS_SHIFT)
|
||
#define CP0_SRSCTL_ESS_SHIFT (12) /* Bits 12-15: Exception shadow sets */
|
||
#define CP0_SRSCTL_ESS_MASK (15 << CP0_SRSCTL_ESS_SHIFT)
|
||
#define CP0_SRSCTL_EICSS_SHIFT (18) /* Bits 18-21: External interrupt controller shadow sets */
|
||
#define CP0_SRSCTL_EICSS_MASK (15 << CP0_SRSCTL_EICSS_SHIFT)
|
||
#define CP0_SRSCTL_HSS_SHIFT (26) /* Bits 26-29: High shadow sets */
|
||
#define CP0_SRSCTL_HSS_MASK (15 << CP0_SRSCTL_HSS_SHIFT)
|
||
# define CP0_SRSCTL_HSS_1SET (0 << CP0_SRSCTL_HSS_SHIFT) /* One shadow set (normal GPR set) */
|
||
# define CP0_SRSCTL_HSS_2SETS (1 << CP0_SRSCTL_HSS_SHIFT) /* Two shadow sets */
|
||
# define CP0_SRSCTL_HSS_4SETS (3 << CP0_SRSCTL_HSS_SHIFT) /* Four shadow sets */
|
||
|
||
/* Register Number: 12 Sel: 3 Name: SRSMap */
|
||
|
||
#define CP0_SRSMAP_SSV0_SHIFT (0) /* Bits 0-3: Shadow set vector 0 */
|
||
#define CP0_SRSMAP_SSV0_MASK (15 << CP0_SRSMAP_SSV0_SHIFT)
|
||
#define CP0_SRSMAP_SSV1_SHIFT (4) /* Bits 4-7: Shadow set vector 1 */
|
||
#define CP0_SRSMAP_SSV1_MASK (15 << CP0_SRSMAP_SSV1_SHIFT)
|
||
#define CP0_SRSMAP_SSV2_SHIFT (8) /* Bits 8-11: Shadow set vector 2 */
|
||
#define CP0_SRSMAP_SSV2_MASK (15 << CP0_SRSMAP_SSV2_SHIFT)
|
||
#define CP0_SRSMAP_SSV3_SHIFT (12) /* Bits 12-15: Shadow set vector 3 */
|
||
#define CP0_SRSMAP_SSV3_MASK (15 << CP0_SRSMAP_SSV3_SHIFT)
|
||
#define CP0_SRSMAP_SSV4_SHIFT (16) /* Bits 16-19: Shadow set vector 4 */
|
||
#define CP0_SRSMAP_SSV4_MASK (15 << CP0_SRSMAP_SSV4_SHIFT)
|
||
#define CP0_SRSMAP_SSV5_SHIFT (20) /* Bits 20-23: Shadow set vector 5 */
|
||
#define CP0_SRSMAP_SSV5_MASK (15 << CP0_SRSMAP_SSV5_SHIFT)
|
||
#define CP0_SRSMAP_SSV6_SHIFT (24) /* Bits 24-27: Shadow set vector 6 */
|
||
#define CP0_SRSMAP_SSV6_MASK (15 << CP0_SRSMAP_SSV6_SHIFT)
|
||
#define CP0_SRSMAP_SSV7_SHIFT (28) /* Bits 28-31: Shadow set vector 7 */
|
||
#define CP0_SRSMAP_SSV7_MASK (15 << CP0_SRSMAP_SSV7_SHIFT)
|
||
|
||
/* Register Number: 13 Sel: 0 Name: Cause
|
||
* Function: Cause of last general exception
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
* NOTES: The following bits are added in the PIC32:
|
||
*/
|
||
|
||
#define CP0_CAUSE_R (1 << 26) /* Bit 26: R bit */
|
||
#define CP0_CAUSE_DC (1 << 27) /* Bit 27: Disable count */
|
||
#define CP0_CAUSE_TI (1 << 30) /* Bit 30: Timer interrupt bit *.
|
||
|
||
/* Register Number: 14 Sel: 0 Name: EPC
|
||
* Function: Program counter at last exception
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
/* Register Number: 15 Sel: 0 Name: PRId
|
||
* Function: Processor identification and revision
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
* NOTE: Slightly different bit interpretations of some fields:
|
||
*/
|
||
|
||
#define CP0_PRID_PATCH_SHIFT (5) /* Bits 0-1: Patch level */
|
||
#define CP0_PRID_PATCH_MASK (3 << CP0_PRID_PATCH_SHIFT)
|
||
#define CP0_PRID_MINOR_SHIFT (2) /* Bits 2-4: Minor revision number */
|
||
#define CP0_PRID_MINOR_MASK (7 << CP0_PRID_MINOR_SHIFT)
|
||
#define CP0_PRID_MAJOR_SHIFT (5) /* Bits 5-7: Major revision number */
|
||
#define CP0_PRID_MAJOR_MASK (7 << CP0_PRID_MAJOR_SHIFT)
|
||
|
||
#undef CP0_PRID_OPTIONS_SHIFT
|
||
#undef CP0_PRID_OPTIONS_MASK
|
||
|
||
/* Register Number: 15 Sel: 1 Name: EBASE */
|
||
|
||
#define CP_EBASE_CPUNUM_SHIFT (0) /* Bits 0-9: CPU number */
|
||
#define CP_EBASE_CPUNUM_MASK (0x3ff << CP_EBASE_CPUNUM_SHIFT)
|
||
#define CP_EBASE_SHIFT (12) /* Bits 30-31=10, Bits 12-29: Exception base */
|
||
#define CP_EBASE_MASK (0x3ffff << CP_EBASE_SHIFT)
|
||
|
||
/* Register Number: 16 Sel: 0 Name: Config
|
||
* Function: Configuration register
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
* 1. PIC32MX is always little-endian.
|
||
* 2. Implementation specific bits defined.
|
||
*/
|
||
|
||
#undef CP0_CONFIG_IMPL_SHIFT
|
||
#undef CP0_CONFIG_IMPL_MASK
|
||
|
||
#define CP0_CONFIG_K23_SHIFT (0) /* Bits 28-30: KSEG2 and KSEG3 cacheability */
|
||
#define CP0_CONFIG_K23_MASK (7 << CP0_CONFIG_K23_SHIFT)
|
||
# define CP0_CONFIG_K23_UNCACHED (2 << CP0_CONFIG_K23_SHIFT)
|
||
# define CP0_CONFIG_K23_CACHEABLE (3 << CP0_CONFIG_K23_SHIFT)
|
||
#define CP0_CONFIG_KU_SHIFT (0) /* Bits 0-2: KUSEG and USEG cacheability */
|
||
#define CP0_CONFIG_KU_MASK (7 << CP0_CONFIG_KU_SHIFT)
|
||
# define CP0_CONFIG_KU_UNCACHED (2 << CP0_CONFIG_KU_SHIFT)
|
||
# define CP0_CONFIG_KU_CACHEABLE (3 << CP0_CONFIG_KU_SHIFT)
|
||
#define CP0_CONFIG_UDI (1 << 22) /* Bit 22: User defined bit */
|
||
#define CP0_CONFIG_SB (1 << 21) /* Bit 32: Simple BE bus mode bit */
|
||
#define CP0_CONFIG_MDU (1 << 20) /* Multipley/Divide unit bit */
|
||
#define CP0_CONFIG_DS (1 << 16) /* Dual SRAM bit */
|
||
|
||
/* Register Number: 16 Sel: 1 Name: Config1
|
||
* Function: Configuration register 1
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*
|
||
* Register Number: 16 Sel: 2 Name: Config2
|
||
* Function: Configuration register 2
|
||
* Compliance Level: Optional.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
#undef CP0_CONFIG2_TBS_SHIFT
|
||
#undef CP0_CONFIG2_TBS_MASK
|
||
|
||
/* Register Number: 16 Sel: 3 Name: Config3
|
||
* Function: Configuration register 3
|
||
* Compliance Level: Optional.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
#define CP0_CONFIG3_SP (1 << 4) /* Bit 4: Support page bit */
|
||
#define CP0_CONFIG3_VINT (1 << 5) /* Bit 5: Vector interrupt bit */
|
||
#define CP0_CONFIG3_VEIC (1 << 6) /* Bit 6: External interrupt controller supported */
|
||
|
||
/* Register Number: 17-22 Reserved
|
||
* Compliance Level: Optional.
|
||
*/
|
||
|
||
/* Register Number: 23 Sel: 0 Name: Debug
|
||
* Function: EJTAG Debug register
|
||
* Compliance Level: Optional.
|
||
*/
|
||
|
||
#define CP0_DEBUG_DSS (1 << 0) /* Bit 0: Debug single-step exception */
|
||
#define CP0_DEBUG_DBP (1 << 1) /* Bit 1: Debug software breakpoint exception */
|
||
#define CP0_DEBUG_DDBL (1 << 2) /* Bit 2: Debug data break exception on load */
|
||
#define CP0_DEBUG_DDBS (1 << 3) /* Bit 3: Debug data break exception on store */
|
||
#define CP0_DEBUG_DIB (1 << 4) /* Bit 4: Debug instruction break exception */
|
||
#define CP0_DEBUG_DINT (1 << 5) /* Bit 5: Debug interrupt exception */
|
||
#define CP0_DEBUG_SST (1 << 8) /* Bit 6: Enable debug single step exception */
|
||
#define CP0_DEBUG_NOSST (1 << 9) /* Bit 7: No single step feature available */
|
||
#define CP0_DEBUG_DEXCCODE_SHIFT (10) /* Bits 10-14: Cause of latest exception in DEBUG mode */
|
||
#define CP0_DEBUG_DEXCCODE_MASK (31 << CP0_DEBUG_DEXCCODE_SHIFT)
|
||
#define CP0_DEBUG_VER_SHIFT (15) /* Bits 15-17: EJTAG version */
|
||
#define CP0_DEBUG_VER_MASK (7 << CP0_DEBUG_VER_SHIFT)
|
||
#define CP0_DEBUG_DDBLIMPR (1 << 18) /* Bit 18: Imprecise debug data break load instruction */
|
||
#define CP0_DEBUG_DDBSIMPR (1 << 19) /* Bit 19: Imprecise debug data break store instruction */
|
||
#define CP0_DEBUG_IEXI (1 << 20) /* Bit 20: Imprecise error exception inhibit */
|
||
#define CP0_DEBUG_DBUSEP (1 << 21) /* Bit 21: Data access bus error exception pending */
|
||
#define CP0_DEBUG_CACHEEP (1 << 22) /* Bit 22: Imprecise cache error exception is pending */
|
||
#define CP0_DEBUG_MCHECKP (1 << 23) /* Bit 23: Imprecise machine check exception is pending */
|
||
#define CP0_DEBUG_IBUSEP (1 << 24) /* Bit 24: Bus error exception pending */
|
||
#define CP0_DEBUG_COUNTDM (1 << 25) /* Bit 25: Count register behavior (1=running) */
|
||
#define CP0_DEBUG_HALT (1 << 26) /* Bit 26: Internal system bus clock stopped */
|
||
#define CP0_DEBUG_DOZE (1 << 27) /* Bit 27: Processor in low power mode */
|
||
#define CP0_DEBUG_LSNM (1 << 28) /* Bit 28: Load/store in DSEG goes to main memory */
|
||
#define CP0_DEBUG_NODCR (1 << 29) /* Bit 29: No DSEG preset */
|
||
#define CP0_DEBUG_DM (1 << 30) /* Bit 30: Processor is operating in DEBUG mode */
|
||
#define CP0_DEBUG_DBD (1 << 31) /* Bit 31: Last debug exception occurred in a dely slot */
|
||
|
||
/* Register Number: 23 Sel: ? Name: Debug2
|
||
* Is this documented anywhere?
|
||
*/
|
||
|
||
/* Register Number: 24 Sel: 0 Name: DEPC
|
||
* Function: Program counter at last EJTAG debug exception
|
||
* Compliance Level: Optional.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*
|
||
* Register Number: 25-29 Reserved
|
||
* Compliance Level: Recommended/Optional.
|
||
*
|
||
* Register Number: 30 Sel: 0 Name: ErrorEPC
|
||
* Function: Program counter at last error
|
||
* Compliance Level: Required.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*
|
||
* Register Number: 31 Sel: 0 Name: DeSAVE
|
||
* Function: EJTAG debug exception save register
|
||
* Compliance Level: Optional.
|
||
*
|
||
* See arch/mips/include/mips32/cp0.h
|
||
*/
|
||
|
||
/****************************************************************************
|
||
* Public Types
|
||
****************************************************************************/
|
||
|
||
#ifndef __ASSEMBLY__
|
||
|
||
/****************************************************************************
|
||
* Inline Functions
|
||
****************************************************************************/
|
||
|
||
/****************************************************************************
|
||
* Public Function Prototypes
|
||
****************************************************************************/
|
||
|
||
#ifdef __cplusplus
|
||
#define EXTERN extern "C"
|
||
extern "C" {
|
||
#else
|
||
#define EXTERN extern
|
||
#endif
|
||
|
||
#undef EXTERN
|
||
#ifdef __cplusplus
|
||
}
|
||
#endif
|
||
|
||
#endif /* __ASSEMBLY__ */
|
||
#endif /* __ARCH_MIPS_INCLUDE_PIC32MX_CP0_H */
|