| .. |
|
chip
|
Fix typo is SAM4E pinmap file
|
2014-11-03 11:59:53 -06:00 |
|
chip.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
Kconfig
|
Add support for SAM3/4 basic TERMIOS and flow control. There are issues with IFLOW control: PDC or DMAC support is required
|
2014-10-29 15:47:15 -06:00 |
|
Make.defs
|
There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.
|
2014-09-01 15:39:34 -06:00 |
|
sam3u_gpio.h
|
SAM4E: Add support for PIO and peripheral clocks
|
2014-02-21 12:34:04 -06:00 |
|
sam3u_periphclks.h
|
Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips
|
2014-02-22 10:38:25 -06:00 |
|
sam3x_gpio.h
|
SAM4E: Add support for PIO and peripheral clocks
|
2014-02-21 12:34:04 -06:00 |
|
sam3x_periphclks.h
|
SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte
|
2014-09-08 06:14:59 -06:00 |
|
sam4cm_gpio.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam4cm_periphclks.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam4cm_supc.c
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam4cm_supc.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam4e_gpio.h
|
SAM4E: Pin multiplex definition header file
|
2014-02-21 18:10:53 -06:00 |
|
sam4e_periphclks.h
|
SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver
|
2014-03-12 15:03:59 -06:00 |
|
sam4l_clockconfig.c
|
Add support for the SAM4L Xplained Pro I/O1 module
|
2013-06-15 10:56:08 -06:00 |
|
sam4l_gpio.c
|
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
|
2014-02-10 18:08:49 -06:00 |
|
sam4l_gpio.h
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
sam4l_periphclks.c
|
Fix typo cloned to many files: SAM32 vs SAM34
|
2014-02-12 13:00:24 -06:00 |
|
sam4l_periphclks.h
|
Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port
|
2013-06-26 18:46:44 -06:00 |
|
sam4s_gpio.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam4s_periphclks.h
|
SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S
|
2014-11-16 06:43:08 -06:00 |
|
sam_aes.c
|
Move crypto header files from include/crypto to include/nuttx/crypto
|
2014-07-03 18:35:08 -06:00 |
|
sam_aes.h
|
Correct authorship on a few files
|
2014-07-03 18:28:26 -06:00 |
|
sam_allocateheap.c
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_clockconfig.c
|
SAM4CM: Fixes from Macs N
|
2014-06-27 12:27:02 -06:00 |
|
sam_clockconfig.h
|
Move SAM4L peripheral clock logic to a separate file
|
2013-06-05 18:48:30 -06:00 |
|
sam_cmcc.c
|
SAM4E CMCC: Fix some errors introducted in last check-in
|
2014-03-26 16:32:16 -06:00 |
|
sam_cmcc.h
|
SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver
|
2014-03-12 15:03:59 -06:00 |
|
sam_dmac.c
|
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
|
2014-08-08 17:53:55 -06:00 |
|
sam_dmac.h
|
SAM3/4: Fix debug logic in DMAC that was causing the loss of interrupts
|
2014-03-14 11:57:42 -06:00 |
|
sam_emac.c
|
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers
|
2014-11-16 08:10:06 -06:00 |
|
sam_emac.h
|
SAM4E-EK: Add support for PHY insterrupt
|
2014-10-24 12:28:57 -06:00 |
|
sam_gpio.c
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam_gpio.h
|
SAM3/4: Fix conditional compilation in GPIO IRQ logic
|
2014-10-24 10:44:43 -06:00 |
|
sam_gpioirq.c
|
Another fix to SAM3/4 GPIO IRQ issue
|
2014-10-24 10:55:52 -06:00 |
|
sam_hsmci.c
|
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
|
2014-08-21 11:16:55 -06:00 |
|
sam_hsmci.h
|
|
|
|
sam_irq.c
|
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
|
2014-08-08 18:39:28 -06:00 |
|
sam_lowputc.c
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam_lowputc.h
|
|
|
|
sam_mpuinit.c
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_mpuinit.h
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_periphclks.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam_rtc.c
|
Add SAM3/4 RTT driver. From Bob Doiron
|
2014-05-05 14:35:37 -06:00 |
|
sam_rtc.h
|
Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)
|
2014-04-22 13:42:38 -06:00 |
|
sam_rtt.c
|
Only SAM4 family has RTTDIS bit in the MR register. SourceForge bug #33 from Fabien Comte
|
2014-09-17 07:42:12 -06:00 |
|
sam_rtt.h
|
Add SAM3/4 RTT driver. From Bob Doiron
|
2014-05-05 14:35:37 -06:00 |
|
sam_serial.c
|
Costmetic changes -- spacing, comments.
|
2014-10-30 16:33:40 -06:00 |
|
sam_spi.c
|
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
|
2014-08-21 11:16:55 -06:00 |
|
sam_spi.h
|
Backport SPI driver enhancements from SAMA5 to SAM3/4
|
2014-03-13 10:34:35 -06:00 |
|
sam_start.c
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_tc.c
|
SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte
|
2014-09-08 06:14:59 -06:00 |
|
sam_tc.h
|
Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)
|
2014-04-22 13:42:38 -06:00 |
|
sam_timerisr.c
|
Move clock functions from sched/ to sched/clock
|
2014-08-08 14:43:02 -06:00 |
|
sam_udp.c
|
Rename kmalloc to kmm_malloc for consistency
|
2014-08-31 17:26:36 -06:00 |
|
sam_udp.h
|
SAM4E: Add USB full speed device (UDP) driver
|
2014-03-17 12:37:55 -06:00 |
|
sam_userspace.c
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_userspace.h
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_vectors.S
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_wdt.c
|
SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte
|
2014-09-08 06:14:59 -06:00 |
|
sam_wdt.h
|
Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)
|
2014-04-22 13:42:38 -06:00 |
