..
CMakeLists.txt
drivers: add UART 16550 compatible PCI device support
2024-09-15 03:37:58 +08:00
Kconfig
drivers: add UART 16550 compatible PCI device support
2024-09-15 03:37:58 +08:00
Kconfig-16550
drivers/uart_16550: configure MCR_OUT2 bit from Kconfig
2024-09-15 03:37:58 +08:00
Kconfig-cmsdk
drivers/serial:support arm cmsdk drivers
2024-04-26 18:42:35 -03:00
Kconfig-lpuart
Add initial support for NXP S32K3 MCU family
2022-07-25 23:47:05 +08:00
Kconfig-pci
drivers: add UART 16550 compatible PCI device support
2024-09-15 03:37:58 +08:00
Kconfig-pl011
drivers/serial/uart_pl011.c : add the interface about clock and reset control for reducing power consumption.
2024-06-03 21:18:44 +08:00
Kconfig-sci
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces
2019-10-11 23:36:57 +08:00
Kconfig-uart
drivers/serial/Kconfig: Split serial Rx/Tx DMA.
2019-12-03 07:06:30 -06:00
Kconfig-usart
drivers/serial/Kconfig: Split serial Rx/Tx DMA.
2019-12-03 07:06:30 -06:00
Make.defs
drivers: add UART 16550 compatible PCI device support
2024-09-15 03:37:58 +08:00
ptmx.c
pty: use mutex to protect alloc minor
2024-08-25 22:16:53 +08:00
pty.c
drivers/pty: support pty write to send signal, like serial driver
2024-09-17 20:11:10 +08:00
pty.h
Replace nxsem API when used as a lock with nxmutex API
2022-10-17 15:59:46 +09:00
serial_cmsdk.c
drivers/serial:support arm cmsdk drivers
2024-04-26 18:42:35 -03:00
serial_dma.c
drivers/serial: unmodify head and tail pointers
2023-09-19 09:41:07 +08:00
serial_gdbstub.c
serial/gdbstub: Change GDBSTUB_ to GDB_
2024-06-24 23:51:43 +08:00
serial_io.c
tty:support tty c_cc VMIN & VTIME
2023-04-29 13:48:52 +08:00
serial.c
drivers/serial: fix deadlock when executing rexec in a user task
2024-09-14 10:27:40 +08:00
uart_16550.c
drivers: prepare 16550 UART driver to support PCI
2024-09-15 03:37:58 +08:00
uart_bth4.c
poll: pollsetup should notify only one fd passd by caller
2023-11-21 09:07:17 +01:00
uart_bth5.c
poll: pollsetup should notify only one fd passd by caller
2023-11-21 09:07:17 +01:00
uart_pci_16550.c
serial/pci_16550: make sure that interrupts are disabled during init
2024-09-18 23:54:12 +08:00
uart_pl011.c
serial/uart_pl011: default syslog needs to check flow control in up_putc
2024-09-12 17:15:40 +08:00
uart_ram.c
drivers/serial: add ram uart driver
2023-09-19 09:41:07 +08:00
uart_rpmsg.c
fix:uart_rpmsg_dmareceive data copy to nbuffer should start from data + length
2024-08-22 09:23:12 -03:00