nuttx

chip

iFix the LPC4330 family SDMMC card access. Some of these fixes (e.g. DELAY register) may also be applicable elsewhere. These are _NOT_ extensively tested, but they are certainly better than the current state of the driver. The fixes, specifically, are;

2018-10-21 17:22:22 -06:00

spifi

arch/: Remove dangling space at the end of lines.

2017-06-28 13:16:48 -06:00

chip.h

add LPC4337FET256

2017-03-09 10:30:28 +01:00

Kconfig

arch/arm/src/lpc54xx/lpc54_sdmmc.c: Ported the last of Dave Marples fixes to the LPC54. Not yet verified.

2018-10-24 18:15:17 -06:00

lpc43_adc.c

Squashed commit of the following:

2018-07-06 09:15:57 -06:00

lpc43_adc.h

…

lpc43_aes.c

…

lpc43_allocateheap.c

arch/: Fix an error found in build testing. The protoype of mpu_log2regionfloor() changed; an additional parameter was added. However, none of the calls to mpu_log2regionfloor() were updated to pass the new, additional parameter.

2018-08-24 16:40:37 -06:00

lpc43_can.c

arch/arm/src/lpc11,lpc17,lpc43,stm32,stm32l4: Fix scope of naming. CONFIG_CAN_TSEG1->CONFIG_LPC17_CAN_TSEG, for example.

2018-06-28 15:44:42 -06:00

lpc43_can.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_ccu.h

…

lpc43_cgu.c

…

lpc43_cgu.h

…

lpc43_clrpend.c

This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available.

2017-12-07 13:30:02 -06:00

lpc43_config.h

Squashed commit of the following:

2018-06-20 12:30:37 -06:00

lpc43_creg.h

…

lpc43_dac.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

lpc43_dac.h

…

lpc43_debug.c

…

lpc43_ehci.c

Replace non critical PANIC with DEBUGPANIC to save the code space

2018-08-24 06:21:15 -06:00

lpc43_ehci.h

…

lpc43_emacram.h

…

lpc43_emc.c

…

lpc43_emc.h

…

lpc43_ethernet.c

Merged in sur5r/nuttx-nuttx/lpc43_eth_pins (pull request #717 )

2018-09-10 11:56:52 +00:00

lpc43_ethernet.h

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

lpc43_gpdma.c

arch/arm/src/imxrt: Add framework for eDMA support. Initial port is a rip off from the SAMA5Dx and is little more than the framework for the DMA support.

2018-05-16 14:28:22 -06:00

lpc43_gpdma.h

arch/arm/src/imxrt: Add framework for eDMA support. Initial port is a rip off from the SAMA5Dx and is little more than the framework for the DMA support.

2018-05-16 14:28:22 -06:00

lpc43_gpio.c

…

lpc43_gpio.h

…

lpc43_gpioint.c

…

lpc43_gpioint.h

…

lpc43_i2c.c

arch/arm/src/lpc43xx: Correct a typo introduced in last large set of changes

2018-01-31 11:32:43 -06:00

lpc43_i2c.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_idle.c

…

lpc43_irq.c

Eliminate some warnings.

2018-10-25 06:48:11 -06:00

lpc43_irq.h

…

lpc43_mpuinit.c

Costmetic update to comments and README.

2017-12-02 11:14:32 -06:00

lpc43_mpuinit.h

Costmetic update to comments and README.

2017-12-02 11:14:32 -06:00

lpc43_pinconfig.c

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_pinconfig.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_rgu.c

…

lpc43_rgu.h

…

lpc43_rit.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

lpc43_rit.h

up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list.

2017-02-07 10:35:04 -06:00

lpc43_rtc.c

arch/arm/src/lpc43xx: Adapt LPC176x RTC driver for the LPC43xx.

2017-12-14 07:03:46 -06:00

lpc43_rtc.h

arch/arm/src/lpc43xx: Adapt LPC176x RTC driver for the LPC43xx.

2017-12-14 07:03:46 -06:00

lpc43_scu.h

…

lpc43_sdmmc.c

With these changes the SDMMC card for LPC4330 is now working properly BUT it needs more testing, especially with different cards etc. This code should be applicable to all members of the lpc43xx family.

2018-10-24 18:06:38 -06:00

lpc43_sdmmc.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_serial.c

arch/arm/src/lpc43xx/lpc43_serial.c: Fix some minor typos in comments.

2018-10-12 17:07:04 -06:00

lpc43_serial.h

…

lpc43_spi.c

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_spi.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_spifi.c

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_spifi.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_ssp.c

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_ssp.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_start.c

Squashed commit of the following:

2018-06-20 12:30:37 -06:00

lpc43_start.h

arch/arm/src/: Fix a error in last commit that was cloned in three places.

2017-12-17 14:38:20 -06:00

lpc43_tickless_rit.c

This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available.

2017-12-07 13:30:02 -06:00

lpc43_timer.c

Replace all ASSERT with DEBUGASSERT to save the code space

2018-08-24 06:58:30 -06:00

lpc43_timer.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

lpc43_timerisr.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

lpc43_uart.c

Squashed commit of the following:

2018-07-06 09:15:57 -06:00

lpc43_uart.h

…

lpc43_usb0dev.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

lpc43_usb0dev.h

…

lpc43_usbram.h

…

lpc43_userspace.c

Costmetic update to comments and README.

2017-12-02 11:14:32 -06:00

lpc43_userspace.h

Costmetic update to comments and README.

2017-12-02 11:14:32 -06:00

lpc43_wdt.h

Merged in sur5r/nuttx-nuttx/lpc43_wwdt-fix (pull request #713 )

2018-08-30 16:42:43 +00:00

lpc43_wwdt.c

Merged in sur5r/nuttx-nuttx/lpc43_wwdt-fix (pull request #713 )

2018-08-30 16:42:43 +00:00

Make.defs

arch/arm/src/armv7-m/up_trigger_irq.c: Add logic to trigger ARMv7-M interrupts and exceptions.

2018-08-25 10:23:21 -06:00