nuttx

2018-06-21 10:59:58 -06:00

Replace all ASSERT with DEBUGASSERT to save the code space

2018-08-24 06:58:30 -06:00

arm syscalls: svcall/sycall logic needs to get the ucontext argument from R4 instead of stack since all syscall parameters pass from registers in syscall.h

2018-08-24 07:11:18 -06:00

armv7-a

arch/arm/src/armv7-a: Replicate the same fix was previously commited for the armv7-r.

2018-09-20 21:40:29 -06:00

armv7-m

arch/arm/src/stm32h7: Remove old references to RXDMA. Add configuration option to select the Rx FIFO threshold level.

2018-09-02 08:35:22 -06:00

armv7-r

arch/arm/src/armv7-a: Replicate the same fix was previously commited for the armv7-r.

2018-09-20 21:40:29 -06:00

bcm2708

arch/arm/src/bcm2708/bcm_gpioint.c: Fixed missing left parenthesis. Note by Anonymous in Issue #101

2018-06-16 15:30:34 -06:00

c5471

Rename devif_loopback_out to devi_loopback

2018-08-25 08:33:21 -06:00

common

up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined

2018-08-24 14:50:45 -06:00

dm320

arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM

2018-05-07 10:13:20 -06:00

efm32

Merged in ebsong/nuttx (pull request #722 )

2018-09-21 03:18:38 +00:00

imx1

arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM

2018-05-07 10:13:20 -06:00

imx6

Kconfig files: Fix several errors noted by Alex Denisov in Bitbucket issue 115.

2018-08-05 10:48:02 -06:00

imxrt

arch/arm/src/imxrt/imxrt_enet.c: Fix a race condition in setting up the Ethernet Tx transfer.

2018-09-26 10:59:47 -06:00

kinetis

arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.

2018-09-21 21:32:50 -06:00

kl

arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM

2018-05-07 10:13:20 -06:00

lc823450

arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.

2018-09-21 21:32:50 -06:00

lpc11xx

Fix lots of typos in C comments and Kconfig help text

2018-07-08 18:24:45 -06:00

lpc17xx

arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.

2018-09-21 21:32:50 -06:00

lpc31xx

Replace non critical PANIC with DEBUGPANIC to save the code space

2018-08-24 06:21:15 -06:00

lpc43xx

Merged in sur5r/nuttx-nuttx/lpc43_eth_pins (pull request #717 )

2018-09-10 11:56:52 +00:00

lpc54xx

arch/arm/src/armv7-m/up_trigger_irq.c: Add logic to trigger ARMv7-M interrupts and exceptions.

2018-08-25 10:23:21 -06:00

lpc214x

arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM

2018-05-07 10:13:20 -06:00

lpc2378

arch/arm/src: All ARM architctures now support CONFIG_ARCH_IDLE_CUSTOM

2018-05-07 10:13:20 -06:00

moxart

Squashed commit of the following:

2018-08-26 11:17:33 -06:00

nrf52

Merged in ebsong/nuttx (pull request #722 )

2018-09-21 03:18:38 +00:00

nuc1xx

Fix lots of typos in C comments and Kconfig help text

2018-07-08 18:24:45 -06:00

sam34

arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.

2018-09-21 21:32:50 -06:00

sama5

Remove a warning

2018-09-16 13:04:12 -06:00

samd2l2

configs/metro-m4: Fix RxD PAD selection. Add a configuration option to use OSCULP32K instead of XOSC32K.

2018-09-01 14:38:19 -06:00

samd5e5

arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.

2018-09-21 21:32:50 -06:00

samv7

arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.

2018-09-21 21:32:50 -06:00

stm32

arch/arm/src/stm32f7: Remove adhoc PM interfaces and add CONFIG_PM serial suspend.

2018-09-21 06:44:23 -06:00

stm32f0

Replace all ASSERT with DEBUGASSERT to save the code space

2018-08-24 06:58:30 -06:00

stm32f7

arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.

2018-09-21 21:32:50 -06:00

stm32h7

arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.

2018-09-21 21:32:50 -06:00

stm32l4

arch/arm/src/stm32f7: Remove adhoc PM interfaces and add CONFIG_PM serial suspend.

2018-09-21 06:44:23 -06:00

str71x

Replace non critical PANIC with DEBUGPANIC to save the code space

2018-08-24 06:21:15 -06:00

tiva

arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.

2018-09-21 21:32:50 -06:00

tms570

Replace all ASSERT with DEBUGASSERT to save the code space

2018-08-24 06:58:30 -06:00

xmc4

arch/arm/src: Correct all ARMv7-M architectures. Interrupts were not be disabled correctly on power up. Writing zero to the NVIC SET-ENABLE registers has no effect. In order to disable interrupts, it is necessary to write all ones to the NVIC CLEAR-ENABLE register. Noted by David Sidrane.

2018-09-21 21:32:50 -06:00

.gitignore

Remove the arch/ subdirectory; replace it with a submodule

2015-07-22 10:56:22 -06:00

Makefile

Squashed commit of the following:

2018-06-20 12:30:37 -06:00