583 lines
22 KiB
C
583 lines
22 KiB
C
/************************************************************************************
|
|
* configs/samd20-xplained/include/board.h
|
|
*
|
|
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef __CONFIGS_SAMD20_XPLAINED_INCLUDE_BOARD_H
|
|
#define __CONFIGS_SAMD20_XPLAINED_INCLUDE_BOARD_H
|
|
|
|
/************************************************************************************
|
|
* Included Files
|
|
************************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
# include <stdint.h>
|
|
# ifdef CONFIG_GPIO_IRQ
|
|
# include <arch/irq.h>
|
|
# endif
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Pre-processor Definitions
|
|
************************************************************************************/
|
|
|
|
/* Clocking *************************************************************************/
|
|
/* Overview
|
|
*
|
|
* OSC8M Output = 8MHz
|
|
* `- GCLK1 Input = 8MHz Prescaler = 1 output = 8MHz
|
|
* `- DFLL Input = 8MHz Multiplier = 6 output = 48MHz
|
|
* `- GCLK0 Input = 48MHz Prescaler = 1 output = 48MHz
|
|
* `- PM Input = 48Mhz CPU divider = 1 CPU frequency = 48MHz
|
|
* APBA divider = 1 APBA frequency = 48MHz
|
|
* APBB divider = 1 APBB frequency = 48MHz
|
|
* APBC divider = 1 APBC frequency = 48MHz
|
|
*
|
|
* The SAMD20 Xplained Pro has one on-board crystal:
|
|
*
|
|
* XC101 32.768KHz XOSC32
|
|
*
|
|
* REVISIT: Not currently used, may want to use as GCLK1 source with
|
|
* DFLL multiplier of ((48000000+16384)/32768) = 1465 which would yield
|
|
* a clock of 48,005,120 MHz.
|
|
*/
|
|
|
|
/* XOSC Configuration -- Not available
|
|
*
|
|
* BOARD_XOSC_ENABLE - Boolean (defined / not defined)
|
|
* BOARD_XOSC_FREQUENCY - In Hz
|
|
* BOARD_XOSC_STARTUPTIME - See SYSCTRL_XOSC_STARTUP_* definitions
|
|
* BOARD_XOSC_ISCRYSTAL - Boolean (defined / not defined)
|
|
* BOARD_XOSC_AMPGC - Boolean (defined / not defined)
|
|
* BOARD_XOSC_ONDEMAND - Boolean (defined / not defined)
|
|
* BOARD_XOSC_RUNINSTANDBY - Boolean (defined / not defined)
|
|
*/
|
|
|
|
#undef BOARD_XOSC_ENABLE
|
|
#define BOARD_XOSC_FREQUENCY 12000000UL
|
|
#define BOARD_XOSC_STARTUPTIME SYSCTRL_XOSC_STARTUP_1S
|
|
#define BOARD_XOSC_ISCRYSTAL 1
|
|
#define BOARD_XOSC_AMPGC 1
|
|
#define BOARD_XOSC_ONDEMAND 1
|
|
#undef BOARD_XOSC_RUNINSTANDBY
|
|
|
|
/* XOSC32 Configuration -- Not used
|
|
*
|
|
* BOARD_XOSC32K_ENABLE - Boolean (defined / not defined)
|
|
* BOARD_XOSC32K_FREQUENCY - In Hz
|
|
* BOARD_XOSC32K_STARTUPTIME - See SYSCTRL_XOSC32K_STARTUP_* definitions
|
|
* BOARD_XOSC32K_ISCRYSTAL - Boolean (defined / not defined)
|
|
* BOARD_XOSC32K_AAMPEN - Boolean (defined / not defined)
|
|
* BOARD_XOSC32K_EN1KHZ - Boolean (defined / not defined)
|
|
* BOARD_XOSC32K_EN32KHZ - Boolean (defined / not defined)
|
|
* BOARD_XOSC32K_ONDEMAND - Boolean (defined / not defined)
|
|
* BOARD_XOSC32K_RUNINSTANDBY - Boolean (defined / not defined)
|
|
*/
|
|
|
|
#undef BOARD_XOSC32K_ENABLE
|
|
#define BOARD_XOSC32K_FREQUENCY 32768 /* 32.768KHz XTAL */
|
|
#define BOARD_XOSC32K_STARTUPTIME SYSCTRL_XOSC32K_STARTUP_2S
|
|
#define BOARD_XOSC32K_ISCRYSTAL 1
|
|
#define BOARD_XOSC32K_AAMPEN 1
|
|
#undef BOARD_XOSC32K_EN1KHZ
|
|
#define BOARD_XOSC32K_EN32KHZ 1
|
|
#define BOARD_XOSC32K_ONDEMAND 1
|
|
#undef BOARD_XOSC32K_RUNINSTANDBY
|
|
|
|
/* OSC32 Configuration -- not used
|
|
*
|
|
* BOARD_OSC32K_ENABLE - Boolean (defined / not defined)
|
|
* BOARD_OSC32K_FREQUENCY - In Hz
|
|
* BOARD_OSC32K_STARTUPTIME - See SYSCTRL_OSC32K_STARTUP_* definitions
|
|
* BOARD_OSC32K_EN1KHZ - Boolean (defined / not defined)
|
|
* BOARD_OSC32K_EN32KHZ - Boolean (defined / not defined)
|
|
* BOARD_OSC32K_ONDEMAND - Boolean (defined / not defined)
|
|
* BOARD_OSC32K_RUNINSTANDBY - Boolean (defined / not defined)
|
|
*/
|
|
|
|
#undef BOARD_OSC32K_ENABLE
|
|
#define BOARD_OSC32K_FREQUENCY 32768 /* 32.768kHz internal oscillator */
|
|
#define BOARD_OSC32K_STARTUPTIME SYSCTRL_OSC32K_STARTUP_4MS
|
|
#define BOARD_OSC32K_EN1KHZ 1
|
|
#define BOARD_OSC32K_EN32KHZ 1
|
|
#define BOARD_OSC32K_ONDEMAND 1
|
|
#undef BOARD_OSC32K_RUNINSTANDBY
|
|
|
|
/* OSC8M Configuration -- always enabled
|
|
*
|
|
* BOARD_OSC8M_PRESCALER - See SYSCTRL_OSC8M_PRESC_DIV* definitions
|
|
* BOARD_OSC8M_ONDEMAND - Boolean (defined / not defined)
|
|
* BOARD_OSC8M_RUNINSTANDBY - Boolean (defined / not defined)
|
|
*/
|
|
|
|
#define BOARD_OSC8M_PRESCALER SYSCTRL_OSC8M_PRESC_DIV1
|
|
#define BOARD_OSC8M_ONDEMAND 1
|
|
#undef BOARD_OSC8M_RUNINSTANDBY
|
|
|
|
#define BOARD_OSC8M_FREQUENCY 8000000 /* 8MHz high-accuracy internal oscillator */
|
|
|
|
/* OSCULP32K Configuration -- not used. */
|
|
|
|
#define BOARD_OSCULP32K_FREQUENCY 32000 /* 32kHz ultra-low-power internal oscillator */
|
|
|
|
/* Digital Frequency Locked Loop configuration. In closed-loop mode, the
|
|
* DFLL output frequency (Fdfll) is given by:
|
|
*
|
|
* Fdfll = DFLLmul * Frefclk
|
|
* = 6 * 8000000 = 48MHz
|
|
*
|
|
* Where the reference clock is Generic Clock Channel 0 output of GLCK1.
|
|
* GCLCK1 provides OSC8M, undivided.
|
|
*
|
|
* When operating in open-loop mode, the output frequency of the DFLL will
|
|
* be determined by the values written to the DFLL Coarse Value bit group
|
|
* and the DFLL Fine Value bit group in the DFLL Value register.
|
|
*
|
|
* BOARD_DFLL_OPENLOOP - Boolean (defined / not defined)
|
|
* BOARD_DFLL_TRACKAFTERFINELOCK - Boolean (defined / not defined)
|
|
* BOARD_DFLL_KEEPLOCKONWAKEUP - Boolean (defined / not defined)
|
|
* BOARD_DFLL_ENABLECHILLCYCLE - Boolean (defined / not defined)
|
|
* BOARD_DFLL_QUICKLOCK - Boolean (defined / not defined)
|
|
* BOARD_DFLL_ONDEMAND - Boolean (defined / not defined)
|
|
* BOARD_DFLL_COARSEVALUE - Value
|
|
* BOARD_DFLL_FINEVALUE - Value
|
|
*
|
|
* Open Loop mode only:
|
|
* BOARD_DFLL_COARSEVALUE - Value
|
|
* BOARD_DFLL_FINEVALUE - Value
|
|
*
|
|
* Closed loop mode only:
|
|
* BOARD_DFLL_GCLKGEN - GCLK index
|
|
* BOARD_DFLL_MULTIPLIER - Value
|
|
* BOARD_DFLL_MAXCOARSESTEP - Value
|
|
* BOARD_DFLL_MAXFINESTEP - Value
|
|
*
|
|
* BOARD_DFLL_FREQUENCY - The resulting frequency
|
|
*/
|
|
|
|
#define BOARD_DFLL_ENABLE 1
|
|
#undef BOARD_DFLL_OPENLOOP
|
|
#undef BOARD_DFLL_ONDEMAND
|
|
#undef BOARD_DFLL_RUNINSTANDBY
|
|
|
|
/* DFLL open loop mode configuration */
|
|
|
|
#define BOARD_DFLL_COARSEVALUE (0x1f / 4)
|
|
#define BOARD_DFLL_FINEVALUE (0xff / 4)
|
|
|
|
/* DFLL closed loop mode configuration */
|
|
|
|
#define BOARD_DFLL_SRCGCLKGEN 1
|
|
#define BOARD_DFLL_MULTIPLIER 6
|
|
#define BOARD_DFLL_QUICKLOCK 1
|
|
#define BOARD_DFLL_TRACKAFTERFINELOCK 1
|
|
#define BOARD_DFLL_KEEPLOCKONWAKEUP 1
|
|
#define BOARD_DFLL_ENABLECHILLCYCLE 1
|
|
#define BOARD_DFLL_MAXCOARSESTEP (0x1f / 4)
|
|
#define BOARD_DFLL_MAXFINESTEP (0xff / 4)
|
|
|
|
#define BOARD_DFLL_FREQUENCY (48000000)
|
|
|
|
/* GCLK Configuration
|
|
*
|
|
* Global enable/disable.
|
|
*
|
|
* BOARD_GCLK_ENABLE - Boolean (defined / not defined)
|
|
*
|
|
* For n=1-7:
|
|
* BOARD_GCLKn_ENABLE - Boolean (defined / not defined)
|
|
*
|
|
* For n=0-8:
|
|
* BOARD_GCLKn_RUN_IN_STANDBY - Boolean (defined / not defined)
|
|
* BOARD_GCLKn_CLOCK_SOURCE - See GCLK_GENCTRL_SRC_* definitions
|
|
* BOARD_GCLKn_PRESCALER - Value
|
|
* BOARD_GCLKn_OUTPUT_ENABLE - Boolean (defined / not defined)
|
|
*/
|
|
|
|
#define BOARD_GCLK_ENABLE 1
|
|
|
|
/* GCLK generator 0 (Main Clock) - Source is the DFLL */
|
|
|
|
#undef BOARD_GCLK0_RUN_IN_STANDBY
|
|
#define BOARD_GCLK0_CLOCK_SOURCE GCLK_GENCTRL_SRC_DFLL48M
|
|
#define BOARD_GCLK0_PRESCALER 1
|
|
#undef BOARD_GCLK0_OUTPUT_ENABLE
|
|
#define BOARD_GCLK0_FREQUENCY (BOARD_DFLL_FREQUENCY / BOARD_GCLK0_PRESCALER)
|
|
|
|
/* Configure GCLK generator 1 - Drives the DFLL */
|
|
|
|
#define BOARD_GCLK1_ENABLE 1
|
|
#undef BOARD_GCLK1_RUN_IN_STANDBY
|
|
#define BOARD_GCLK1_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
|
|
#define BOARD_GCLK1_PRESCALER 1
|
|
#undef BOARD_GCLK1_OUTPUT_ENABLE
|
|
#define BOARD_GCLK1_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK1_PRESCALER)
|
|
|
|
/* Configure GCLK generator 2 (RTC) */
|
|
|
|
#undef BOARD_GCLK2_ENABLE
|
|
#undef BOARD_GCLK2_RUN_IN_STANDBY
|
|
#define BOARD_GCLK2_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC32K
|
|
#define BOARD_GCLK2_PRESCALER 32
|
|
#undef BOARD_GCLK2_OUTPUT_ENABLE
|
|
#define BOARD_GCLK2_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK2_PRESCALER)
|
|
|
|
/* Configure GCLK generator 3 */
|
|
|
|
#undef BOARD_GCLK3_ENABLE
|
|
#undef BOARD_GCLK3_RUN_IN_STANDBY
|
|
#define BOARD_GCLK3_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
|
|
#define BOARD_GCLK3_PRESCALER 1
|
|
#undef BOARD_GCLK3_OUTPUT_ENABLE
|
|
#define BOARD_GCLK3_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK3_PRESCALER)
|
|
|
|
/* Configure GCLK generator 4 */
|
|
|
|
#undef BOARD_GCLK4_ENABLE
|
|
#undef BOARD_GCLK4_RUN_IN_STANDBY
|
|
#define BOARD_GCLK4_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
|
|
#define BOARD_GCLK4_PRESCALER 1
|
|
#undef BOARD_GCLK4_OUTPUT_ENABLE
|
|
#define BOARD_GCLK4_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK4_PRESCALER)
|
|
|
|
/* Configure GCLK generator 5 */
|
|
|
|
#undef BOARD_GCLK5_ENABLE
|
|
#undef BOARD_GCLK5_RUN_IN_STANDBY
|
|
#define BOARD_GCLK5_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
|
|
#define BOARD_GCLK5_PRESCALER 1
|
|
#undef BOARD_GCLK5_OUTPUT_ENABLE
|
|
#define BOARD_GCLK5_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK5_PRESCALER)
|
|
|
|
/* Configure GCLK generator 6 */
|
|
|
|
#undef BOARD_GCLK6_ENABLE
|
|
#undef BOARD_GCLK6_RUN_IN_STANDBY
|
|
#define BOARD_GCLK6_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
|
|
#define BOARD_GCLK6_PRESCALER 1
|
|
#undef BOARD_GCLK6_OUTPUT_ENABLE
|
|
#define BOARD_GCLK6_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK6_PRESCALER)
|
|
|
|
/* Configure GCLK generator 7 */
|
|
|
|
#undef BOARD_GCLK7_ENABLE
|
|
#undef BOARD_GCLK7_RUN_IN_STANDBY
|
|
#define BOARD_GCLK7_CLOCK_SOURCE GCLK_GENCTRL_SRC_OSC8M
|
|
#define BOARD_GCLK7_PRESCALER 1
|
|
#undef BOARD_GCLK7_OUTPUT_ENABLE
|
|
#define BOARD_GCLK7_FREQUENCY (BOARD_OSC8M_FREQUENCY / BOARD_GCLK7_PRESCALER)
|
|
|
|
/* The source of the main clock is always GCLK_MAIN. Also called GCLKGEN[0], this is
|
|
* the clock feeding the Power Manager. The Power Manager, in turn, generates main
|
|
* clock which is divided down to produce the CPU, AHB, and APB clocks.
|
|
*
|
|
* The main clock is initially OSC8M divided by 8.
|
|
*/
|
|
|
|
#define BOARD_GCLK_MAIN_FREQUENCY BOARD_GCLK0_FREQUENCY
|
|
|
|
/* Main clock dividers
|
|
*
|
|
* BOARD_CPU_DIVIDER - See PM_CPUSEL_CPUDIV_* definitions
|
|
* BOARD_CPU_FRQUENCY - In Hz
|
|
* BOARD_CPU_FAILDECT - Boolean (defined / not defined)
|
|
* BOARD_APBA_DIVIDER - See M_APBASEL_APBADIV_* definitions
|
|
* BOARD_APBA_FRQUENCY - In Hz
|
|
* BOARD_APBB_DIVIDER - See M_APBBSEL_APBBDIV_* definitions
|
|
* BOARD_APBB_FRQUENCY - In Hz
|
|
* BOARD_APBC_DIVIDER - See M_APBCSEL_APBCDIV_* definitions
|
|
* BOARD_APBC_FRQUENCY - In Hz
|
|
*/
|
|
|
|
#define BOARD_CPU_FAILDECT 1
|
|
#define BOARD_CPU_DIVIDER PM_CPUSEL_CPUDIV_1
|
|
#define BOARD_APBA_DIVIDER PM_APBASEL_APBADIV_1
|
|
#define BOARD_APBB_DIVIDER PM_APBBSEL_APBBDIV_1
|
|
#define BOARD_APBC_DIVIDER PM_APBCSEL_APBCDIV_1
|
|
|
|
/* Resulting frequencies */
|
|
|
|
#define BOARD_MCK_FREQUENCY (BOARD_GCLK_MAIN_FREQUENCY)
|
|
#define BOARD_CPU_FREQUENCY (BOARD_MCK_FREQUENCY)
|
|
#define BOARD_PBA_FREQUENCY (BOARD_MCK_FREQUENCY)
|
|
#define BOARD_PBB_FREQUENCY (BOARD_MCK_FREQUENCY)
|
|
#define BOARD_PBC_FREQUENCY (BOARD_MCK_FREQUENCY)
|
|
#define BOARD_PBD_FREQUENCY (BOARD_MCK_FREQUENCY)
|
|
|
|
/* FLASH wait states
|
|
*
|
|
* Vdd Range Wait states Maximum Operating Frequency
|
|
* ------------- -------------- ---------------------------
|
|
* 1.62V to 2.7V 0 14 MHz
|
|
* 1 28 MHz
|
|
* 2 42 MHz
|
|
* 3 48 MHz
|
|
* 2.7V to 3.63V 0 24 MHz
|
|
* 1 48 MHz
|
|
*/
|
|
|
|
#if 0 /* REVISIT -- should not be necessary */
|
|
# define BOARD_FLASH_WAITSTATES 1
|
|
#else
|
|
# define BOARD_FLASH_WAITSTATES 2
|
|
#endif
|
|
|
|
/* SERCOM definitions ***************************************************************/
|
|
/* This is the source clock generator for the GCLK_SERCOM_SLOW clock that is common
|
|
* to all SERCOM modules.
|
|
*/
|
|
|
|
#define BOARD_SERCOM_SLOW_GCLKGEN 0
|
|
|
|
/* SERCOM0 SPI is available on EXT1
|
|
*
|
|
* PIN PORT SERCOM FUNCTION
|
|
* --- ------------------ -----------
|
|
* 15 PA5 SERCOM0 PAD1 SPI SS
|
|
* 16 PA6 SERCOM0 PAD2 SPI MOSI
|
|
* 17 PA4 SERCOM0 PAD0 SPI MISO
|
|
* 18 PA7 SERCOM0 PAD3 SPI SCK
|
|
*/
|
|
|
|
#define BOARD_SERCOM0_GCLKGEN 0
|
|
#define BOARD_SERCOM0_MUXCONFIG (SPI_CTRLA_DOPO_DOPAD231 | SPI_CTRLA_DIPAD0)
|
|
#define BOARD_SERCOM0_PINMAP_PAD0 PORT_SERCOM0_PAD0_2 /* SPI_MISO */
|
|
#define BOARD_SERCOM0_PINMAP_PAD1 0 /* microSD_SS */
|
|
#define BOARD_SERCOM0_PINMAP_PAD2 PORT_SERCOM0_PAD2_2 /* SPI_MOSI */
|
|
#define BOARD_SERCOM0_PINMAP_PAD3 PORT_SERCOM0_PAD3_2 /* SPI_SCK */
|
|
|
|
#define BOARD_SERCOM0_FREQUENCY BOARD_GCLK0_FREQUENCY
|
|
|
|
/* SERCOM1 SPI is available on EXT2
|
|
*
|
|
* PIN PORT SERCOM FUNCTION
|
|
* --- ------------------ -----------
|
|
* 15 PA17 SERCOM1 PAD1 SPI SS
|
|
* 16 PA18 SERCOM1 PAD2 SPI MOSI
|
|
* 17 PA16 SERCOM1 PAD0 SPI MISO
|
|
* 18 PA19 SERCOM1 PAD3 SPI SCK
|
|
*/
|
|
|
|
#define BOARD_SERCOM1_GCLKGEN 0
|
|
#define BOARD_SERCOM1_MUXCONFIG (SPI_CTRLA_DOPO_DOPAD231 | SPI_CTRLA_DIPAD0)
|
|
#define BOARD_SERCOM1_PINMAP_PAD0 PORT_SERCOM1_PAD0_1 /* SPI_MISO */
|
|
#define BOARD_SERCOM1_PINMAP_PAD1 0 /* microSD_SS */
|
|
#define BOARD_SERCOM1_PINMAP_PAD2 PORT_SERCOM1_PAD2_1 /* SPI_MOSI */
|
|
#define BOARD_SERCOM1_PINMAP_PAD3 PORT_SERCOM1_PAD3_1 /* SPI_SCK */
|
|
|
|
#define BOARD_SERCOM1_FREQUENCY BOARD_GCLK0_FREQUENCY
|
|
|
|
/* The SAMD20 Xplained Pro contains an Embedded Debugger (EDBG) that can be
|
|
* used to program and debug the ATSAMD20J18A using Serial Wire Debug (SWD).
|
|
* The Embedded debugger also include a Virtual COM port interface over
|
|
* SERCOM3. Virtual COM port connections:
|
|
*
|
|
* PA24 SERCOM3 / USART TXD
|
|
* PA25 SERCOM3 / USART RXD
|
|
*/
|
|
|
|
#define BOARD_SERCOM3_GCLKGEN 0
|
|
#define BOARD_SERCOM3_MUXCONFIG (USART_CTRLA_RXPAD3 | USART_CTRLA_TXPAD2)
|
|
#define BOARD_SERCOM3_PINMAP_PAD0 0
|
|
#define BOARD_SERCOM3_PINMAP_PAD1 0
|
|
#define BOARD_SERCOM3_PINMAP_PAD2 PORT_SERCOM3_PAD2_1 /* USART TX */
|
|
#define BOARD_SERCOM3_PINMAP_PAD3 PORT_SERCOM3_PAD3_1 /* USART RX */
|
|
|
|
#define BOARD_SERCOM3_FREQUENCY BOARD_GCLK0_FREQUENCY
|
|
|
|
/* The SERCOM4 USART is available on connectors EXT1, EXT2, and EXT3
|
|
*
|
|
* PIN EXT1 EXT2 EXT3 GPIO Function
|
|
* ---- ---- ---- ---- ------------------
|
|
* 13 PB09 PB13 PB11 SERCOM4 / USART RX
|
|
* 14 PB08 PB12 PB12 SERCOM4 / USART TX
|
|
* 19 GND GND GND N/A
|
|
* 20 VCC VCC VCC N/A
|
|
*
|
|
* If you have a TTL to RS-232 converter then this is the most convenient
|
|
* serial console to use (because you don't lose the console device each time
|
|
* you lose the USB connection). It is the default in all of the SAMD20
|
|
* configurations.
|
|
*/
|
|
|
|
#define BOARD_SERCOM4_GCLKGEN 0
|
|
|
|
#if defined(CONFIG_SAMD20_XPLAINED_USART4_EXT1)
|
|
# define BOARD_SERCOM4_MUXCONFIG (USART_CTRLA_RXPAD1 | USART_CTRLA_TXPAD0)
|
|
# define BOARD_SERCOM4_PINMAP_PAD0 PORT_SERCOM4_PAD0_3 /* USART TX */
|
|
# define BOARD_SERCOM4_PINMAP_PAD1 PORT_SERCOM4_PAD1_3 /* USART RX */
|
|
# define BOARD_SERCOM4_PINMAP_PAD2 0
|
|
# define BOARD_SERCOM4_PINMAP_PAD3 0
|
|
#elif defined(CONFIG_SAMD20_XPLAINED_USART4_EXT2)
|
|
# define BOARD_SERCOM4_MUXCONFIG (USART_CTRLA_RXPAD1 | USART_CTRLA_TXPAD0)
|
|
# define BOARD_SERCOM4_PINMAP_PAD0 PORT_SERCOM4_PAD0_1 /* USART TX */
|
|
# define BOARD_SERCOM4_PINMAP_PAD1 PORT_SERCOM4_PAD1_1 /* USART RX */
|
|
# define BOARD_SERCOM4_PINMAP_PAD2 0
|
|
# define BOARD_SERCOM4_PINMAP_PAD3 0
|
|
#else /* if defined(CONFIG_SAMD20_XPLAINED_USART4_EXT3) */
|
|
# define BOARD_SERCOM4_MUXCONFIG (USART_CTRLA_RXPAD3 | USART_CTRLA_TXPAD2)
|
|
# define BOARD_SERCOM4_PINMAP_PAD0 0
|
|
# define BOARD_SERCOM4_PINMAP_PAD1 0
|
|
# define BOARD_SERCOM4_PINMAP_PAD2 PORT_SERCOM4_PAD2_3 /* USART TX */
|
|
# define BOARD_SERCOM4_PINMAP_PAD3 PORT_SERCOM4_PAD3_3 /* USART RX */
|
|
#endif
|
|
|
|
#define BOARD_SERCOM4_FREQUENCY BOARD_GCLK0_FREQUENCY
|
|
|
|
/* SERCOM5 SPI is available on EXT3
|
|
*
|
|
* PIN PORT SERCOM FUNCTION
|
|
* --- ------------------ -----------
|
|
* 15 PB17 SERCOM5 PAD1 SPI SS
|
|
* 16 PB22 SERCOM5 PAD2 SPI MOSI
|
|
* 17 PB16 SERCOM5 PAD0 SPI MISO
|
|
* 18 PB23 SERCOM5 PAD3 SPI SCK
|
|
*/
|
|
|
|
#define BOARD_SERCOM5_GCLKGEN 0
|
|
#define BOARD_SERCOM5_MUXCONFIG (SPI_CTRLA_DOPO_DOPAD231 | SPI_CTRLA_DIPAD0)
|
|
#define BOARD_SERCOM5_PINMAP_PAD0 PORT_SERCOM5_PAD0_1 /* SPI_MISO */
|
|
#define BOARD_SERCOM5_PINMAP_PAD1 0 /* microSD_SS */
|
|
#define BOARD_SERCOM5_PINMAP_PAD2 PORT_SERCOM5_PAD2_4 /* SPI_MOSI */
|
|
#define BOARD_SERCOM5_PINMAP_PAD3 PORT_SERCOM5_PAD3_4 /* SPI_SCK */
|
|
|
|
#define BOARD_SERCOM5_FREQUENCY BOARD_GCLK0_FREQUENCY
|
|
|
|
/* LED definitions ******************************************************************/
|
|
/* There are three LEDs on board the SAMD20 Xplained Pro board: The EDBG
|
|
* controls two of the LEDs, a power LED and a status LED. There is only
|
|
* one user controllable LED, a yellow LED labelled STATUS near the SAMD20 USB
|
|
* connector.
|
|
*
|
|
* This LED is controlled by PC07 and the LED can be activated by driving the
|
|
* PA14 to GND.
|
|
*/
|
|
|
|
/* LED index values for use with sam_setled() */
|
|
|
|
#define BOARD_STATUS_LED 0
|
|
#define BOARD_NLEDS 1
|
|
|
|
/* LED bits for use with sam_setleds() */
|
|
|
|
#define BOARD_STATUS LED_BIT (1 << BOARD_STATUS_LED)
|
|
|
|
/* When CONFIG_ARCH_LEDS is defined in the NuttX configuration, NuttX will
|
|
* control the LED as defined below. Thus if the LED is statically on, NuttX has
|
|
* successfully booted and is, apparently, running normally. If the LED is
|
|
* flashing at approximately 2Hz, then a fatal error has been detected and the
|
|
* system has halted.
|
|
*/
|
|
|
|
#define LED_STARTED 0 /* STATUS LED=OFF */
|
|
#define LED_HEAPALLOCATE 0 /* STATUS LED=OFF */
|
|
#define LED_IRQSENABLED 0 /* STATUS LED=OFF */
|
|
#define LED_STACKCREATED 1 /* STATUS LED=ON */
|
|
#define LED_INIRQ 2 /* STATUS LED=no change */
|
|
#define LED_SIGNAL 2 /* STATUS LED=no change */
|
|
#define LED_ASSERTION 2 /* STATUS LED=no change */
|
|
#define LED_PANIC 3 /* STATUS LED=flashing */
|
|
|
|
/* Button definitions ***************************************************************/
|
|
/* Mechanical buttons:
|
|
*
|
|
* The SAMD20 Xplained Pro contains two mechanical buttons. One button is the
|
|
* RESET button connected to the SAMD20 reset line and the other is a generic user
|
|
* configurable button. When a button is pressed it will drive the I/O line to GND.
|
|
*
|
|
* PA15 SW0
|
|
*/
|
|
|
|
/* The SAMD20 Xplained Pro supports one button: */
|
|
|
|
#define BUTTON_SW0 0
|
|
#define NUM_BUTTONS 1
|
|
|
|
#define BUTTON_SW0_BIT (1 << BUTTON_SW0)
|
|
|
|
/************************************************************************************
|
|
* Public Data
|
|
************************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
#define EXTERN extern "C"
|
|
extern "C"
|
|
{
|
|
#else
|
|
#define EXTERN extern
|
|
#endif
|
|
|
|
/************************************************************************************
|
|
* Public Function Prototypes
|
|
************************************************************************************/
|
|
/************************************************************************************
|
|
* Name: sam_boardinitialize
|
|
*
|
|
* Description:
|
|
* All SAM3U architectures must provide the following entry point. This entry point
|
|
* is called early in the initialization -- after all memory has been configured
|
|
* and mapped but before any devices have been initialized.
|
|
*
|
|
************************************************************************************/
|
|
|
|
void sam_boardinitialize(void);
|
|
|
|
/************************************************************************************
|
|
* Name: sam_ledinit, sam_setled, and sam_setleds
|
|
*
|
|
* Description:
|
|
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If
|
|
* CONFIG_ARCH_LEDS is not defined, then the following interfaces are available to
|
|
* control the LEDs from user applications.
|
|
*
|
|
************************************************************************************/
|
|
|
|
#ifndef CONFIG_ARCH_LEDS
|
|
void sam_ledinit(void);
|
|
void sam_setled(int led, bool ledon);
|
|
void sam_setleds(uint8_t ledset);
|
|
#endif
|
|
|
|
#undef EXTERN
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __CONFIGS_SAMD20_XPLAINED_INCLUDE_BOARD_H */
|