David Sidrane f822107efb drivers/serial/Kconfig: Split serial Rx/Tx DMA.

2019-12-03 07:06:30 -06:00

..

Kconfig

drivers/serial/Kconfig: Split serial Rx/Tx DMA.

2019-12-03 07:06:30 -06:00

Kconfig-16550

Squashed commit of the following:

2018-08-26 11:37:16 -06:00

Kconfig-lpuart

drivers/serial/Kconfig: Split serial Rx/Tx DMA.

2019-12-03 07:06:30 -06:00

Kconfig-sci

We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces

2019-10-11 23:36:57 +08:00

Kconfig-uart

drivers/serial/Kconfig: Split serial Rx/Tx DMA.

2019-12-03 07:06:30 -06:00

Kconfig-usart

drivers/serial/Kconfig: Split serial Rx/Tx DMA.

2019-12-03 07:06:30 -06:00

lowconsole.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

Make.defs

This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied.

2019-11-02 11:30:33 -06:00

ptmx.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

pty.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

pty.h

PTY: Add ioctls to support locking and unlocking of the slave. LIBC: Add implementation of unlockpt()

2016-07-15 09:39:33 -06:00

serial_dma.c

drivers/serial/serial_dma.c: Still need reset xmit buffer when meet TCOFLUSH. This is an amendment to 8fb19a43597dd7d3185a619fc716545ff6ffd96d.

2019-11-07 06:40:21 -06:00

serial_io.c

drivers/serial/serial_io.c and serial_dma.c: Fix some long lines.

2019-11-06 07:10:24 -06:00

serial.c

drivers/serial/serial.c: Only real uart will call pm_activity().

2019-11-03 19:56:28 -06:00

tcdrain.c

Make sure that labeling is used consistently in all function headers (part 2).

2018-02-01 12:03:55 -06:00

uart_16550.c

drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00

uart_rpmsg.c

This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied.

2019-11-02 11:30:33 -06:00