nuttx/drivers
liangchaozhong cc426f8539 usrsock:add done flag in usrsock_iovec_do
set done to true if all data in iovec array is copied

Signed-off-by: liangchaozhong <liangchaozhong@xiaomi.com>
2022-10-11 00:57:49 +08:00
..
1wire drivers: Convert DEBUGASSERT(false) into more intuitive DEBUGPANIC() 2022-07-14 12:08:45 +08:00
analog Fixed non-UTF8 characters. 2022-09-28 09:38:55 +08:00
audio Remove the unnessary empty line after label 2022-09-30 17:54:56 +02:00
bch Return -EINVAL for the internal API 2022-09-30 17:54:56 +02:00
can poll: add poll_notify() api and call it in all drivers 2022-09-26 12:06:32 +08:00
clk rptun: add ns_match callback to resolve rptun deadlock 2022-07-27 20:36:51 +08:00
contactless Replace nxsem_timedwait with nxsem_tickwait 2022-05-15 13:55:58 +03:00
crypto poll: add poll_notify() api and call it in all drivers 2022-09-26 12:06:32 +08:00
dummy build: Remove the dummy drivers folder under boards 2020-05-24 20:20:12 +01:00
eeprom Return -EINVAL for the internal API 2022-09-30 17:54:56 +02:00
efuse drivers: remove unimplemented open/close/ioctl interfaces 2022-04-15 16:56:25 +08:00
i2c drivers: Fix some Kconfig help texts 2022-09-13 23:25:47 +08:00
i2s file_operations: get back C89 compatible initializer 2022-01-11 02:14:00 +08:00
input Fixed non-UTF8 characters. 2022-09-28 09:38:55 +08:00
ioexpander Remove the unnessary empty line after label 2022-09-30 17:54:56 +02:00
ipcc poll: add poll_notify() api and call it in all drivers 2022-09-26 12:06:32 +08:00
lcd Fixed non-UTF8 characters. 2022-09-28 09:38:55 +08:00
leds Add gSPI mode support for Infineon CYW43539 2022-08-15 10:31:36 +08:00
loop file_operations: get back C89 compatible initializer 2022-01-11 02:14:00 +08:00
math drivers: remove unimplemented open/close/ioctl interfaces 2022-04-15 16:56:25 +08:00
misc rpmsgdev: add rpmsgdev poll() support. 2022-10-09 02:40:06 +08:00
mmcsd drivers/mmcsd: Remove executable permissions from source files 2022-09-13 23:07:34 +08:00
modem poll: add poll_notify() api and call it in all drivers 2022-09-26 12:06:32 +08:00
motor drivers: Convert DEBUGASSERT(false) into more intuitive DEBUGPANIC() 2022-07-14 12:08:45 +08:00
mtd Remove the unnessary empty line after label 2022-09-30 17:54:56 +02:00
net drivers: net: Fix build errors in skeleton.c 2022-10-07 14:34:03 +08:00
note Replace all strncpy with strlcpy for safety 2022-08-25 13:38:36 +08:00
pipes poll: add poll_notify() api and call it in all drivers 2022-09-26 12:06:32 +08:00
power Fixed non-UTF8 characters. 2022-09-28 09:38:55 +08:00
rc poll: add poll_notify() api and call it in all drivers 2022-09-26 12:06:32 +08:00
rf drivers: remove unimplemented open/close/ioctl interfaces 2022-04-15 16:56:25 +08:00
rptun rptun: update rptun to openamp 2022.04.0 2022-08-03 01:22:53 +08:00
segger drivers/segger: Support the customize SEGGER_RTT_[BUFFER_]SECTION 2022-07-06 12:55:16 -03:00
sensors Remove the unnessary empty line after label 2022-09-30 17:54:56 +02:00
serial poll: add poll_notify() api and call it in all drivers 2022-09-26 12:06:32 +08:00
spi drivers: remove unimplemented open/close/ioctl interfaces 2022-04-15 16:56:25 +08:00
syslog Remove the unnessary empty line after label 2022-09-30 17:54:56 +02:00
timers watchdog: Add help description for each keep alive method 2022-09-20 22:04:36 +02:00
usbdev libc: Move queue.h from include to include/nuttx 2022-09-26 08:04:58 +02:00
usbhost Remove the unnessary empty line after label 2022-09-30 17:54:56 +02:00
usbmisc poll: add poll_notify() api and call it in all drivers 2022-09-26 12:06:32 +08:00
usbmonitor pid_t: unify usage of special task IDs 2022-03-22 21:22:32 +08:00
usrsock usrsock:add done flag in usrsock_iovec_do 2022-10-11 00:57:49 +08:00
video libc: Move queue.h from include to include/nuttx 2022-09-26 08:04:58 +02:00
wireless bluetooth: Remove hcicollecttask from btuart shim driver 2022-10-02 18:14:00 -03:00
.gitignore build: Remve the unnecessary .gitignore 2020-05-23 18:00:40 +01:00
drivers_initialize.c drivers/mtd: add rpmsg mtd support 2022-09-09 19:27:57 +08:00
Kconfig move usrsock_dev.c to driver folder 2022-09-10 13:08:22 +08:00
Makefile move usrsock_dev.c to driver folder 2022-09-10 13:08:22 +08:00
README.txt support for SAMA5D27 SDMMC peripheral 2020-07-16 23:39:37 +01:00

README
^^^^^^

This directory contains various device drivers -- both block and
character drivers as well as other more specialized drivers.

Contents:
  - Files in this directory
  - Subdirectories of this directory
  - Skeleton files

Files in this directory
^^^^^^^^^^^^^^^^^^^^^^^

dev_null.c and dev_zero.c
  These files provide the standard /dev/null and /dev/zero devices.  See
  include/nuttx/drivers/drivers.h for prototypes of functions that should
  be called if you want to register these devices (devnull_register()
  and devzero_register()).

ramdisk.c
  Can be used to set up a block of memory or (read-only) FLASH as
  a block driver that can be mounted as a file system.  See
  include/nuttx/drivers/ramdisk.h.

rwbuffer.c
  A facility that can be used by any block driver in-order to add
  writing buffering and read-ahead buffering.

Subdirectories of this directory:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

analog/
  This directory holds implementations of analog device drivers.
  This includes drivers for Analog to Digital Conversion (ADC) as
  well as drivers for Digital to Analog Conversion (DAC).
  See include/nuttx/analog/*.h for registration information.

audio/
  Audio device drivers.  See include/nuttx/audio/audio.h for interface
  definitions.  See also the audio subsystem at nuttx/audio/.

bch/
  Contains logic that may be used to convert a block driver into
  a character driver.  This is the complementary conversion as that
  performed by loop.c.  See include/nuttx/fs/fs.h for registration
  information.

can/
  This is the CAN drivers and logic support.  See include/nuttx/can/can.h
  for usage information.

contactless/
  Contactless devices are related to wireless devices.  They are not
  communication devices with other similar peers, but couplers/interfaces
  to contactless cards and tags.

crypto/
  Contains crypto drivers and support logic, including the /dev/urandom
  device.

eeprom/
  An EEPROM is a form of Memory Technology Device (see drivers/mtd).
  EEPROMs are non-volatile memory like FLASH, but differ in underlying
  memory technology and differ in usage in many respects: They may not
  be organized into blocks (at least from the standpoint of the user)
  and it is not necessary to erase the EEPROM memory before re-writing
  it.  In addition, EEPROMs tend to be much smaller than FLASH parts,
  usually only a few kilobytes vs megabytes for FLASH.  EEPROM tends to
  be used to retain a small amount of device configuration information;
  FLASH tends to be used for program or massive data storage. For these
  reasons, it may not be convenient to use the more complex MTD
  interface but instead use the simple character interface provided by
  the EEPROM drivers.

i2c/
  I2C drivers and support logic.  See include/nuttx/i2c/i2c_master.h

i2s/
  I2S drivers and support logic.  See include/nuttx/audio/i2s.h

input/
  This directory holds implementations of human input device (HID)
  drivers.  This includes such things as mouse, touchscreen, joystick,
  keyboard and keypad drivers.  See include/nuttx/input/*.h for
  registration information.

  Note that USB HID devices are treated differently.  These can be
  found under usbdev/ or usbhost/.

lcd/
  Drivers for parallel and serial LCD and OLED type devices.  These
  drivers support interfaces as defined in include/nuttx/lcd/lcd.h

leds/
  Various LED-related drivers including discrete as well as PWM-
  driven LEDs.

loop/
  Supports the standard loop device that can be used to export a
  file (or character device) as a block device.  See losetup() and
  loteardown() in include/nuttx/fs/fs.h.

mmcsd/
  Support for MMC/SD block drivers.  MMC/SD block drivers based on
  SPI and SDIO/MCI interfaces are supported.  See include/nuttx/mmcsd.h
  and include/nuttx/sdio.h for further information.

mtd/
  Memory Technology Device (MTD) drivers.  Some simple drivers for
  memory technologies like FLASH, EEPROM, NVRAM, etc.  See
  include/nuttx/mtd/mtd.h

  (Note: This is a simple memory interface and should not be
  confused with the "real" MTD developed at infradead.org.  This
  logic is unrelated; I just used the name MTD because I am not
  aware of any other common way to refer to this class of devices).

net/
  Network interface drivers.  See also include/nuttx/net/net.h

pipes/
  FIFO and named pipe drivers.  Standard interfaces are declared
  in include/unistd.h

power/
  Power management (PM) driver interfaces.  These interfaces are used
  to manage power usage of a platform by monitoring driver activity
  and by placing drivers into reduce power usage modes when the
  drivers are not active.

pwm/
  Provides the "upper half" of a pulse width modulation (PWM) driver.
  The "lower half" of the PWM driver is provided by device-specific
  logic.  See include/nuttx/timers/pwm.h for usage information.

sensors/
  Drivers for various sensors.  A sensor driver differs little from
  other types of drivers other than they are use to provide measurements
  of things in environment like temperature, orientation, acceleration,
  altitude, direction, position, etc.

  DACs might fit this definition of a sensor driver as well since they
  measure and convert voltage levels.  DACs, however, are retained in
  the analog/ sub-directory.

serial/
  Front-end character drivers for chip-specific UARTs.  This provide
  some TTY-like functionality and are commonly used (but not required for)
  the NuttX system console.  See also include/nuttx/serial/serial.h

spi/
  SPI drivers and support logic.  See include/nuttx/spi/spi.h

syslog/
  System logging devices. See include/syslog.h and include/nuttx/syslog/syslog.h

timers/
  Includes support for various timer devices including:

  - An "upper half" for a generic timer driver.  See
    include/nuttx/timers/timer.h for more information.

  - An "upper half" for a generic watchdog driver.  See
    include/nuttx/timers/watchdog.h for more information.

  - RTC drivers

usbdev/
  USB device drivers.  See also include/nuttx/usb/usbdev.h

usbhost/
  USB host drivers.  See also include/nuttx/usb/usbhost.h

video/
  Video-related drivers.  See include/nuttx/video/.

wireless/
  Drivers for various wireless devices.

Skeleton Files
^^^^^^^^^^^^^^

Skeleton files are "empty" frameworks for NuttX drivers.  They are provided to
give you a good starting point if you want to create a new NuttX driver.
The following skeleton files are available:

  drivers/lcd/skeleton.c -- Skeleton LCD driver
  drivers/mtd/skeleton.c -- Skeleton memory technology device drivers
  drivers/net/skeleton.c -- Skeleton network/Ethernet drivers
  drivers/usbhost/usbhost_skeleton.c -- Skeleton USB host class driver