nuttx/arch/arm/src/stm32f7/stm32_dumpgpio.c

/****************************************************************************
 * arch/arm/src/stm32f7/stm32_gpio.c
 *
 *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <sys/types.h>
#include <debug.h>

#include <arch/stm32f7/chip.h>

#include "up_arch.h"

#include "chip.h"
#include "stm32_gpio.h"
#include "stm32_rcc.h"

#ifdef CONFIG_DEBUG

/* Content of this file requires verification before it is used with other
 * families
 */

#if defined(CONFIG_STM32F7_STM32F74XX) || defined(CONFIG_STM32F7_STM32F75XX)

/****************************************************************************
 * Private Data
 ****************************************************************************/
/* Port letters for prettier debug output */

#ifdef CONFIG_DEBUG
static const char g_portchar[STM32F7_NGPIO] =
{
#if STM32F7_NGPIO > 11
#  error "Additional support required for this number of GPIOs"
#elif STM32F7_NGPIO > 10
  'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', 'K'
#elif STM32F7_NGPIO > 9
  'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J'
#elif STM32F7_NGPIO > 8
  'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I'
#elif STM32F7_NGPIO > 7
  'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H'
#elif STM32F7_NGPIO > 6
  'A', 'B', 'C', 'D', 'E', 'F', 'G'
#elif STM32F7_NGPIO > 5
  'A', 'B', 'C', 'D', 'E', 'F'
#elif STM32F7_NGPIO > 4
  'A', 'B', 'C', 'D', 'E'
#elif STM32F7_NGPIO > 3
  'A', 'B', 'C', 'D'
#elif STM32F7_NGPIO > 2
  'A', 'B', 'C'
#elif STM32F7_NGPIO > 1
  'A', 'B'
#elif STM32F7_NGPIO > 0
  'A'
#else
#  error "Bad number of GPIOs"
#endif
};
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Function:  stm32_dumpgpio
 *
 * Description:
 *   Dump all GPIO registers associated with the provided pin configuration
 *
 ****************************************************************************/

int stm32_dumpgpio(uint32_t pinset, const char *msg)
{
  irqstate_t   flags;
  uint32_t     base;
  unsigned int port;

  /* Get the base address associated with the GPIO port */

  port = (pinset & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
  base = g_gpiobase[port];

  /* The following requires exclusive access to the GPIO registers */

  flags = irqsave();

  DEBUGASSERT(port < STM32F7_NGPIO);

  lldbg("GPIO%c pinset: %08x base: %08x -- %s\n",
        g_portchar[port], pinset, base, msg);

  if ((getreg32(STM32_RCC_AHB1ENR) & RCC_AHB1ENR_GPIOEN(port)) != 0)
    {
      lldbg(" MODE: %08x OTYPE: %04x     OSPEED: %08x PUPDR: %08x\n",
            getreg32(base + STM32_GPIO_MODER_OFFSET),
            getreg32(base + STM32_GPIO_OTYPER_OFFSET),
            getreg32(base + STM32_GPIO_OSPEED_OFFSET),
            getreg32(base + STM32_GPIO_PUPDR_OFFSET));
      lldbg("  IDR: %04x       ODR: %04x       LCKR: %05x\n",
            getreg32(base + STM32_GPIO_IDR_OFFSET),
            getreg32(base + STM32_GPIO_ODR_OFFSET),
            getreg32(base + STM32_GPIO_LCKR_OFFSET));
      lldbg(" AFRH: %08x  AFRL: %08x\n",
            getreg32(base + STM32_GPIO_AFRH_OFFSET),
            getreg32(base + STM32_GPIO_AFRL_OFFSET));
    }
  else
    {
      lldbg("  GPIO%c not enabled: AHB1ENR: %08x\n",
            g_portchar[port], getreg32(STM32_RCC_AHB1ENR));
    }

  irqrestore(flags);
  return OK;
}

#endif /* CONFIG_STM32F7_STM32F74XX || CONFIG_STM32F7_STM32F75XX */
#endif /* CONFIG_DEBUG */