nuttx/configs/ne64badge/src/ne64badge.h

192 lines
8.6 KiB
C

/************************************************************************************
* configs/ne64badge/src/ne64badge.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_NE64BADGE_SRC_NE64BADGE_H
#define __CONFIGS_NE64BADGE_SRC_NE64BADGE_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include "m9s12.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* NE64BADGE Pin Usage **************************************************************/
/* PIN PIN NAME BOARD SIGNAL NOTES
* --- ------------------- -------------- ----------------------
* 44 RESET J3 RESET_L Also to SW3
* 57 BKGD/MODC/TAGHI_B BDM BKGD CON6A
*
* 85 PAD0 VR1 Potentiometer
* 86 PAD1 J3 ANALOG_IN0 Not used on board
* 87 PAD2 J3 ANALOG_IN1 " " " " "" " "
* 88 PAD3 J3 ANALOG_IN2 " " " " "" " "
* 89 PAD4 J3 ANALOG_IN3 " " " " "" " "
*
* 70 PHY_TXP J7 TD+ RJ45 connector
* 71 PHY_TXN J7 TD- RJ45 connector
* 73 PHY_RXP J7 RD+ RJ45 connector
* 74 PHY_RXN J7 RD- RJ45 connector
*
* Ports A,B,E,K managed by the MEBI block
* ---------------------------------------
* 60 PA0/ADDR8/DATA8 J3 ADDR_DATA8 Not used on board
* 61 PA1/ADDR9/DATA9 J3 ADDR_DATA9 " " " " "" " "
* 62 PA2/ADDR10/DATA10 J3 ADDR_DATA10 " " " " "" " "
* 63 PA3/ADDR11/DATA11 J3 ADDR_DATA11 " " " " "" " "
* 77 PA4/ADDR12/DATA12 J3 ADDR_DATA12 " " " " "" " "
* 78 PA5/ADDR13/DATA13 J3 ADDR_DATA13 " " " " "" " "
* 79 PA6/ADDR14/DATA14 J3 ADDR_DATA14 " " " " "" " "
* 80 PA7/ADDR15/DATA15 J3 ADDR_DATA15 " " " " "" " "
*
* 10 PB0/ADDR0/DATA0 J3 ADDR_DATA0 Not used on board
* 11 PB1/ADDR1/DATA1 J3 ADDR_DATA1 " " " " "" " "
* 12 PB2/ADDR2/DATA2 J3 ADDR_DATA2 " " " " "" " "
* 13 PB3/ADDR3/DATA3 J3 ADDR_DATA3 " " " " "" " "
* 16 PB4/ADDR4/DATA4 J3 ADDR_DATA4 " " " " "" " "
* 17 PB5/ADDR5/DATA5 J3 ADDR_DATA5 " " " " "" " "
* 18 PB6/ADDR6/DATA6 J3 ADDR_DATA6 " " " " "" " "
* 19 PB7/ADDR7/DATA7 J3 ADDR_DATA7 " " " " "" " "
*
* 56 PE0/XIRQ_B BUTTON1 SW1
* 55 PE1/IRQ_B J3 IRQ Not used on board
* 54 PE2/R_W J3 RW " " " " "" " "
* 53 PE3/LSTRB_B/TAGLO_B J3 LSTRB " " " " "" " "
* 41 PE4/ECLK J3 ECLK " " " " "" " "
* 40 PE5/IPIPE0/MODA J3 MODA " " " " "" " "
* 39 PE6/IPIPE1/MODB J3 MODB " " " " "" " "
* 38 PE7/NOACC/XCLKS_B pulled low pulled low
*/
#define NE64BADGE_BUTTON1 (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT_E | GPIO_PIN_0)
/* 97 PK0/XADR14 N/C N/C
* 98 PK1/XADR15 N/C N/C
* 99 PK2/XADR16 N/C N/C
* 100 PK3/XADR17 N/C N/C
* 103 PK4/XADR18 N/C N/C
* 104 PK5/XADR19 N/C N/C
* 105 PK6/XCS_B J3 XCS Not used on board
* 106 PK7/ECS_B/ROMCTL J3 ECS " " " " "" " "
*
* Ports T,S,G,H,J,L managed by the PIM Block
* ------------------------------------------
* 110 PT4/IOC1_4 J3 GPIO8 Not used on board
* 109 PT5/IOC1_5 J3 GPIO9 " " " " "" " "
* 108 PT6/IOC1_6 J3 GPIO10 " " " " "" " "
* 107 PT7/IOC1_7 N/C N/C
*
* 30 PS0/RXD0 RS232_RX Eventually maps to J2 RXD
* 31 PS1/TXD0 RS232_TX Eventually maps to J2 TXD
* 32 PS2/RXD1 J3&J4 UART_RX Not used on board
* 33 PS3/TXD1 J3&J4 UART_TX " " " " "" " "
* 34 PS4/MISO J3 SPI_MISO " " " " "" " "
* 35 PS5/MOSI J3 SPI_MOSI " " " " "" " "
* 36 PS6/SCK J3 SPI_CLOCK " " " " "" " "
* 37 PS7/SS_B J3 SPI_SS " " " " "" " "
*
* 22 PG0/RXD0/KWG0 J3 GPIO0 Not used on board
* 23 PG1/RXD1/KWG1 J3 GPIO1 " " " " "" " "
* 24 PG2/RXD2/KWG2 J3 GPIO2 " " " " "" " "
* 25 PG3/RXD3/KWG3 J3 GPIO3 " " " " "" " "
* 26 PG4/RXCLK/KWG4 J3 GPIO4 " " " " "" " "
* 27 PG5/RXDV/KWG5 J3 GPIO5 " " " " "" " "
* 28 PG6/RXER/KWG6 J3 GPIO6 " " " " "" " "
* 29 PG7/KWG7 J3 GPIO7 " " " " "" " "
*
* 7 PH0/TXD0/KWH0 N/C N/C
* 6 PH1/TXD1/KWH1 N/C N/C
* 5 PH2/TXD2/KWH2 J4 XBEE_RESET Not used on board
* 4 PH3/TXD3/KWH3 J4 XBEE_RSSI Not used on board
* 3 PH4/TXCLK/KWH4 BUTTON2 SW2
* 2 PH5/TXDV/KWH5 J5 XBEE_LOAD_H Not used on board
* 1 PH6/TXER/KWH6 J4 XBEE_LOAD_L Not used on board
*/
#define NE64BADGE_BUTTON2 (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT_H | GPIO_PIN_4)
/* 8 PJ0/MDC/KWJ0 LED1 D21, red
* 9 PJ1/MDIO/KWJ1 LED2 D22, red
* 20 PJ2/CRS/KWJ2 J3 SPI_CS Not used on board
* 21 PJ3/COL/KWJ3 N/C
* 112 PJ6/SDA/KWJ6 J3 I2C_DATA Not used on board
* 111 PJ7/SCL/KWJ7 J3 I2C_CLOCK " " " " "" " "
*/
#define NE64BADGE_LED1 (GPIO_OUTPUT | GPIO_OUTPUT_HIGH | GPIO_PORT_J | GPIO_PIN_0)
#define NE64BADGE_LED2 (GPIO_OUTPUT | GPIO_OUTPUT_HIGH | GPIO_PORT_J | GPIO_PIN_1)
/* 51 PL6/TXER/KWL6 N/C N/C
* 52 PL5/TXDV/KWL5 N/C N/C
* 58 PL4/COLLED Collision LED red
* 59 PL3/DUPLED Full Duplex LED yellow
* 81 PL2/SPDLED 100Mbps Speed LED yellow
* 83 PL1/LNKLED Link Good LED green
* 84 PL0/ACTLED Activity LED yellow
*/
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public data
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: hcs12_spidev_initialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the STM3210E-EVAL board.
*
************************************************************************************/
void weak_function hcs12_spidev_initialize(void);
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_NE64BADGE_SRC_NE64BADGE_H */